Catalytic Converters And Their Utility

1. Article2: Globalrefininggroup.com Catalytic Converters And Their Utility A French Engineer, Mr. Eugene Houdry invented the first catalytic converter in 1950s in order to lessen the amount of pollution being ejected out by smokestacks. The basic function of the Catalytic converter is to turn nitrogen oxides, carbon monoxide, and hydrocarbons into carbon dioxide, nitrogen, oxygen and water. They work effectively at operating temperature of around 750° Celsius. Catalytic Converter can further be distinguished in two categories: two-way and three-way. The two-way catalytic converter oxidizes both carbon monoxide and hydrocarbons whereas three-way catalytic converter, in addition to functions rendered by two- way catalytic converters, also aids in lessening of nitrogen oxides. Catalytic Converter is fast emerging vehicle devise in the market at present. It is attached to the vehicles in order to convert the toxic gases produced by internal combustion engine into ozone-friendly and less toxic fumes. Most of the engines today from buses, trains, trucks, cars, lawnmowers etc. consist of Catalytic converters. Both Palladium and Platinum - rare precious metals are brushed onto honeycomb-shaped matrix inside the catalytic converter. When exhaust flows, the metals convert gases like smog-producing hydrocarbons and carbon monoxide into carbon dioxide and water. Catalytic converters contain several other metals, including copper, iron and manganese. Catalytic Converter in the vehicles can get clogged over time, which will ultimately produce a lot of exhaust gases. Too much exhaust from your vehicle may produce lead. If the lead is present, then the device is ineffective and defeats the sole purpose of being environment friendly. To avoid these problems, a periodic check-up and maintenance of the vehicle is required. It is advised to replace those Catalytic Converters that are ten years old or older. There are two ways: Universal or Direct-fit replacement. Universal fitted Catalytic Converters come in variety of sizes designed to be fabricated and welded into place. Whereas, direct fitted Catalytic Converters are nearly identical intended to replace an entire section of the exhaust system specifically designed to suit your vehicle’s requirement. Catalytic Converter is very helpful for those countries where air pollution is a major concern. Hence, they have become major advancement as it is helping the local governments to resolve the problem of air pollution. A lot of research is being done for developing cost-effective types of Catalytic Converters that use 70-80% less rhodium, platinum and palladium. Chemical reaction is possible only with the help of these precious metals hence they are very expensive. The core of this renovated technology is using nano-sized ceramic particles with these precious metal embedded into it. This allows more surface area so that the catalyst can be more effective. The more freely the exhaust gases flow out of the pipes, the more horsepower and torque your engine can produce. High-Flow Catalytic Converters are most commonly used by car owners who want the most power from their car while following local laws. It is the prime responsibility of the citizens to respect and implement the rules & regulations in compliance with the country, state or national laws. Catalytic Converter recycling and processing as well as related services are being provided by Global Refining Group located in USA. For information on alpha recycling, one can visit Globalrefininggroup.com ABOUT THE AUTHOR

2. Article2: Globalrefininggroup.com Tom Blake is an expert in recycling catalytic converters who also likes to write many interesting articles and blogs, helping people in understanding the process and the many advantages that stem from it. In the US, he recommends Globalrefininggroup.com as the most trusted specialist for this job.