1 / 7

ZEIT4700 – S1, 2014

ZEIT4700 – S1, 2014. Mathematical Modeling and Optimization. School of Engineering and Information Technology. Design of experiments. DOE – An information gathering exercise to study variations due to controllable / uncontrollable factors.

gloria-owens
Télécharger la présentation

ZEIT4700 – S1, 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ZEIT4700 – S1, 2014 Mathematical Modeling and Optimization School of Engineering and Information Technology

  2. Design of experiments DOE – An information gathering exercise to study variations due to controllable / uncontrollable factors. To achieve desirable product quality by design, Taguchi method suggested a three stage process: - System design (conceptualization/synthesis) - Parameter design (finding appropriate design factor levels) - Tolerance design (change in products/processes) Parameter design allows for improving the quality without requiring different process/equipment/material etc.

  3. Parameter design Two types of parameters : • Control factors – can be easily controlled such as material choice, cycle time etc. • Noise factors – Difficult / not possible / too expensive to control, such as usage conditions, temperature etc. Orthogonal Arrays (OAs) are employed in Taguchi’s method to systematically vary and test different levels of each control factors.

  4. Orthogonal arrays Some commonly used orthogonal arrays

  5. Factorial DOEs All possible combinations x2 x1

  6. Space filling DOEs Only one point in one row/column x2 x1

  7. Resources Course material and suggested reading can be accessed at http://seit.unsw.adfa.edu.au/research/sites/mdo/Hemant/design-2.htm Reference Wysk, R. A., Niebel, B. W., Cohen, P. H., and Simpson, T. W. Manufacturing Processes: Integrated Product and Process Design, McGraw Hill, New York, 2000.

More Related