1 / 33

TECH 104 – Technical Graphics Communication

TECH 104 – Technical Graphics Communication. Week 6: Section Views. TECH 104 – Technical Graphics Communication. Here’s what we talked about last time…. Week 6: Section Views. TECH 104 – Technical Graphics Communication.

gomer
Télécharger la présentation

TECH 104 – Technical Graphics Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TECH 104 – Technical Graphics Communication Week 6: Section Views

  2. TECH 104 – Technical Graphics Communication Here’s what we talked about last time….. Week 6: Section Views

  3. TECH 104 – Technical Graphics Communication We can also use the glass box technique to add an additional Picture Plane (PP) to project inclined surfaces to. By doing so, we can show the slanted surface’s true shape and size. NOTE: The new glass plane is parallel to the surface it describes just like the other glass projection planes. Week 6: Section Views

  4. Here’s how to lay out an auxiliary view: TECH 104 – Technical Graphics Communication Step 1: Make a new PP line labeled “1” that is parallel to Line AD in the FRONT view. This PP may be placed any distance from the object you wish. Week 6: Section Views

  5. TECH 104 – Technical Graphics Communication Step 2: Add the other PP lines as shown so they will connect to PP 1. It is always a good idea to label the PPs as shown. Week 6: Section Views

  6. TECH 104 – Technical Graphics Communication Step 3: Project the end points of Line AD at a 90 degree angle from the front view. Week 6: Section Views

  7. TECH 104 – Technical Graphics Communication Step 4: Transfer the distance from PP to point C in the TOP view… …to its new position from PP 1 in the auxiliary view. Week 6: Section Views

  8. TECH 104 – Technical Graphics Communication Step 5: Connect the new point C with the projected line to find point B. Do the same thing for points A and D. Week 6: Section Views

  9. TECH 104 – Technical Graphics Communication Step 6: Snap your lines in the auxiliary view to create its final form. NOTE: You do not need to label all points on your drawing. Week 6: Section Views

  10. TECH 104 – Technical Graphics Communication Let’s now take a look at how we can show hidden information using section views….. Week 6: Section Views

  11. TECH 104 – Technical Graphics Communication Week 6: Section Views Section views are used to expose hidden features. When we “open up” an object and view interior features, we see them not as hidden lines, but as object lines.

  12. The “Cutting Plane” is a flat surface that identifies: • Which section of the object is to be shown, and • 2. The path of the imaginary cut through the object TECH 104 – Technical Graphics Communication Week 6: Section Views

  13. Figure A illustrates the proper technique that should be used to show a section view • A correctly drawn section view which uses both object and section lines. • An improperly drawn section view where the hidden lines have not been replaced with object lines. • C. A normal multiview projection of the part. TECH 104 – Technical Graphics Communication Week 6: Section Views

  14. The Cutting Plane Line: • Is used to show where the object is being cut • Shows the Line of Sight (LOS) so a proper section view can be drawn. • Replaces the need to draw an entire cut-ting plane • Why is the example shown on the right incorrect?? TECH 104 – Technical Graphics Communication Week 6: Section Views

  15. Cutting Plane lines are the heaviest of all lines used in drafting. They are drawn much like center lines, but have 2 short dashes in them. The arrows on their end show the line of sight. TECH 104 – Technical Graphics Communication Week 6: Section Views

  16. TECH 104 – Technical Graphics Communication Every material has a “hatch line “ pattern. Cast Iron can be used as the generic hatch line for any material. If you use this symbol, a “general note” should be added to the plate to identify the proper material used in the part. Week 6: Section Views

  17. Please review images 14.20 through 14.23 to review how hatch lines are drawn in diverse applications. Here are some general rules: • Hatch lines should never be drawn parallel to the edge of an object. Always use a slightly different angle so it makes the object easier to read. • 2. If you have large interior areas to hatch, using short hatch lines around the perimeter is an acceptable practice. • 3. If there needs to be notes or dimensions placed inside a hatched area, leave “white space” in the center of the hatch area to add these items. TECH 104 – Technical Graphics Communication Week 6: Section Views

  18. TECH 104 – Technical Graphics Communication Week 6: Section Views The full section is the most common type of section view used. It is known as a “FULL” section because the cutting plane passes through the full length of the object.

  19. “Half” sections show the interior of an object where the cutting plane has penetrated only half way through the object. NOTE: The cutting plane line may only have one arrow on it. TECH 104 – Technical Graphics Communication Week 6: Section Views

  20. TECH 104 – Technical Graphics Communication Week 6: Section Views “Broken” sections have no cutting plane line and are used to show a small, localized area of the object.

  21. TECH 104 – Technical Graphics Communication “Revolved” section views are used to show diverse shapes that may appear in a part. Here we see that the section lies on the area it describes and may be placed on top of object lines, or be shown as part of a broken out section to assist whoever is reading the plate. Week 6: Section Views

  22. TECH 104 – Technical Graphics Communication Week 6: Section Views “Removed” sections allow the sectional view to be placed in another area of the plate so as not to crowd other views. All removed views are labeled on their cutting plane and the view.

  23. TECH 104 – Technical Graphics Communication Week 6: Section Views “Offset” sections use a cutting plane that jogs to pick up valuable features of the part.

  24. Sectioned assemblies are used to show relationships between parts. NOTE: The hatching lines alternate direction on parts that are adjacent to one another. TECH 104 – Technical Graphics Communication Week 6: Section Views

  25. TECH 104 – Technical Graphics Communication Drawing styles may sometimes be combined with one another. Here we see an auxiliary and section view combined. Week 6: Section Views

  26. TECH 104 – Technical Graphics Communication Week 6: Section Views Examples of sectioning conventions...

  27. TECH 104 – Technical Graphics Communication Week 6: Section Views Examples of sectioning conventions...

  28. TECH 104 – Technical Graphics Communication Week 6: Section Views Examples of sectioning conventions...

  29. TECH 104 – Technical Graphics Communication Week 6: Section Views Examples of sectioning conventions...

  30. TECH 104 – Technical Graphics Communication Week 6: Section Views Examples of sectioning conventions...

  31. TECH 104 – Technical Graphics Communication Week 7: Dimensioning

More Related