1 / 95

Unit 3: Thermochemistry

Unit 3: Thermochemistry. Chemistry 3202. Unit Outline. Temperature and Kinetic Energy Heat/Enthalpy Calculation Temperature changes (q = mc∆T) Phase changes (q = n∆H) Heating and Cooling Curves Calorimetry (q = C∆T & above formulas). Unit Outline. Chemical Reactions

gregory-vaughn
Télécharger la présentation

Unit 3: Thermochemistry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unit 3: Thermochemistry Chemistry 3202

  2. Unit Outline • Temperature and Kinetic Energy • Heat/Enthalpy Calculation • Temperature changes (q = mc∆T) • Phase changes (q = n∆H) • Heating and Cooling Curves • Calorimetry (q = C∆T & above formulas)

  3. Unit Outline • Chemical Reactions • PE Diagrams • Thermochemical Equations • Hess’s Law • Bond Energy • STSE: What Fuels You?

  4. Temperature and Kinetic Energy Thermochemistryis the study of energy changes in chemical and physical changes eg. dissolving burning phase changes

  5. Temperature - a measure of the average kinetic energy of particles in a substance - a change in temperature means particles are moving at different speeds - measured in either Celsius degrees or degrees Kelvin Kelvin = Celsius + 273.15

  6. The Celsius scale is based on the freezing and boiling point of water The Kelvin scale is based on absolute zero- the temperature at which particles in a substance have zero kinetic energy.

  7. p. 628

  8. 300 K # of particles 500 K Kinetic Energy

  9. Heat/Enthalpy Calculations system - the part of the universe being studied and observed surroundings - everything else in the universe open system - a system that can exchange matter and energy with the surroundings eg. an open beaker of water a candle burning closed system - allows energy transfer but is closed to the flow of matter.

  10. isolated system – a system completely closed to the flow of matter and energy heat - refers to the transfer of kinetic energy from a system of higher temperature to a system of lower temperature. - the symbol for heat is q WorkSheet: Thermochemistry #1

  11. Part A: Thought Lab (p. 631)

  12. Part B: Thought Lab (p. 631)

  13. Heat/Enthalpy Calculations specific heat capacity – the energy , in Joules (J), needed to change the temperature of one gram (g) of a substance by one degree Celsius (°C). • The symbol for specific heat capacity is a lowercase c

  14. A substance with a large value of c can absorb or release more energy than a substance with a small value of c. ie. For two substances, the substance with the larger c will undergo a smaller temperature change with the same loss or gain of heat.

  15. q = mc∆T q = heat (J) m = mass (g) c = specific heat capacity ∆T = temperature change = T2 – T1 = Tf – Ti FORMULA

  16. eg. How much heat is needed to raise the temperature of 500.0 g of water from 20.0 °C to 45.0 °C? Solve q = m c ∆T for c, m, ∆T, T2 & T1 • p. 634 #’s 1 – 4 • p. 636 #’s 5 – 8 WorkSheet: Thermochemistry #2

  17. heat capacity- the quantity of energy , in Joules (J), needed to change the temperature of a substance by one degree Celsius (°C) • The symbol for heat capacity is uppercase C • The unit is J/ °C or kJ/ °C

  18. C = mc q = C ∆T C = heat capacity c = specific heat capacity m = mass ∆T = T2 – T1 FORMULA Your Turn p.637 #’s 11-14 WorkSheet: Thermochemistry #3

  19. Enthalpy Changes enthalpy change - the difference between the potential energy of the reactants and the products during a physical or chemical change AKA: Heat of Reaction or ∆H

  20. Products ∆H Reactants PE Endothermic Reaction Reaction Progress

  21. Products ∆H Reactants PE Endothermic Reaction Enthalpy ∆H Reaction Progress

  22. Products Reactants Enthalpy ∆H is + Endothermic

  23. products ∆H is - reactants Enthalpy Exothermic

  24. Enthalpy Changes in Reactions • All chemical reactions require bond breaking in reactants followed by bond making to form products • Bond breaking requires energy (endothermic) while bond formation releases energy (exothermic) see p. 639

  25. Enthalpy Changes in Reactions endothermic reaction - the energy required to break bonds is greater than the energy released when bonds form. ie. energy is absorbed exothermic reaction - the energy required to break bonds is less than the energy released when bonds form. ie. energy is produced

  26. Enthalpy Changes in Reactions ∆H can represent the enthalpy change for a number of processes • Chemical reactions ∆Hrxn – enthalpy of reaction ∆Hcomb – enthalpy of combustion (see p. 643)

  27. Formation of compounds from elements ∆Hof– standard enthalpy of formation The standard molar enthalpy of formation is the energy released or absorbed when one mole of a compound is formed directly from the elements in their standard states. (see p. 642) eg. C(s) + ½ O2(g) → CO(g) ΔHfo = -110.5 kJ/mol

  28. Use the equations below to determine the ΔHfo for CH3OH(l) and CaCO3(s) 2 C(s) + 4 H2(g) + O2(g) → 2 CH3OH(l) + 477.2 kJ 2 CaCO3(s) + 2413.8kJ → 2 Ca(s) + 2 C(s) + 3 O2(g)

  29. Phase Changes (p.647) ∆Hvap – enthalpy of vaporization ∆Hfus – enthalpy of melting ∆Hcond – enthalpy of condensation ∆Hfre – enthalpy of freezing eg. H2O(l)  H2O(g) ΔHvap = Hg(l)  Hg(s) ΔHfre = +40.7 kJ/mol -23.4 kJ/mol

  30. Solution Formation(p.647, 648) ∆Hsoln– enthalpy of solution • eg. • ΔHsoln, of ammonium nitrate is +25.7 kJ/mol. • NH4NO3(s) + 25.7 kJ → NH4NO3(aq) • ΔHsoln, of calcium chloride is −82.8 kJ/mol. • CaCl2(s) → CaCl2(aq) + 82.8 kJ

  31. Three ways to represent an enthalpy change: 1. thermochemical equation - the energy term written into the equation. 2. enthalpy term is written as a separate expression beside the equation. 3. enthalpy diagram.

  32. eg. the formation of water from the elements produces 285.8 kJ of energy. 1. H2(g) + ½ O2(g) → H2O(l) + 285.8 kJ 2. H2(g) + ½ O2(g) → H2O(l) ∆Hf = -285.8 kJ/mol thermochemical equation

  33. H2(g) + ½ O2(g) ∆Hf = -285.8 kJ/mol H2O(l) enthalpy diagram 3. Enthalpy (H) examples: pp. 641-643 questions p. 643 #’s 15-18 WorkSheet: Thermochemistry #4

  34. FORMULA: q = n∆H q = heat (kJ) n = # of moles ∆H = molar enthalpy (kJ/mol) Calculating Enthalpy Changes

  35. eg. How much heat is released when 50.0 g of CH4forms from C and H ? (p. 642) q = nΔH = (3.115 mol)(-74.6 kJ/mol) = -232 kJ

  36. eg. How much heat is released when 50.00 g of CH4 undergoes complete combustion? (p. 643) q = nΔH = (3.115 mol)(-965.1 kJ/mol) = -3006 kJ

  37. eg. How much energy is needed to change 20.0 g of H2O(l) at 100 °C to steam at 100 °C ? Mwater = 18.02 g/mol ΔHvap = +40.7 kJ/mol q = nΔH = (1.110 mol)(+40.7 kJ/mol) = +45.2 kJ

  38. ∆Hfre and ∆Hcond have the opposite sign of the above values.

  39. eg. The molar enthalpy of solution for ammonium nitrate is +25.7 kJ/mol. How much energy is absorbed when 40.0 g of ammonium nitrate dissolves? q = nΔH = (0.4996 mol)(+25.7 kJ/mol) = +12.8 kJ

  40. What mass of ethane, C2H6, must be burned to produce 405 kJ of heat? ΔH = -1250.9 kJ q = - 405 kJ q = nΔH n = 0.3238 mol m = n x M = (0.3238 mol)(30.08 g/mol) = 9.74 g

  41. Complete: p. 643 #’s 15 - 18 p. 645; #’s 19 – 23 pp. 648 – 649; #’s 24 – 29 19. (a) -8.468 kJ (b) -7.165 kJ 20. -1.37 x103 kJ 21. (a) -2.896 x 103 kJ 21. (b) -6.81 x104 kJ 21. (c) -1.186 x 106 kJ 22. -0.230 kJ 23. 3.14 x103 g

  42. 24. 2.74 kJ 25.(a) 33.4 kJ (b) 33.4 kJ 26.(a) absorbed (b) 0.096 kJ 27.(a) NaCl(s) + 3.9 kJ/mol → NaCl(aq) (b) 1.69 kJ (c) cool; heat absorbed from water 28. 819.2 g 29. 3.10 x 104 kJ

  43. p. 638 #’ 4 – 8 pp. 649, 650 #’s 3 – 8 p. 657, 658 #’s 9 - 18 WorkSheet: Thermochemistry #5

  44. Heating and Cooling Curves Demo: Cooling of p-dichlorobenzene

  45. KE PE KE Cooling curve for p-dichlorobenzene 80 Temp. (°C ) liquid 50 freezing solid 20 Time

  46. KE KE PE Heating curve for p-dichlorobenzene 80 Temp. (°C ) 50 20 Time

  47. What did we learn from this demo?? • During a phase change temperature remains constant and PE changes • Changes in temperature during heating or cooling means the KE of particles is changing

  48. p. 651

More Related