1 / 34

MSHA Haulage Safety

MSHA Haulage Safety. Types of Mobile Equipment. Pre-Shift Inspection Per 56.14100. Pre-shift Inspection Inspected by equipment operator before being placed in operation on that shift Defects that affect safety corrected in timely manner

guillermina
Télécharger la présentation

MSHA Haulage Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MSHA Haulage Safety

  2. Types of Mobile Equipment

  3. Pre-Shift InspectionPer 56.14100 • Pre-shift Inspection • Inspected by equipment operator before being placed in operation on that shift • Defects that affect safety corrected in timely manner • Equipment with defects taken out of service and parked in designated area • Defects not immediately corrected, shall be reported and recorded, until defects are fixed

  4. Haulage Requirements • Requirements for Seat Belts • Seat Belt on Haul Truck - 56.14131 (SAE J386) Operator Restraint Systems for Off Road Work Machines, 1985 • Maintained in functional condition and replaced when necessary to assure proper performance

  5. Haulage Requirements • Requirements for Seat Belts • Seat Belt on Loader - 56.14130(a) (SAE J386 or SAE J1194 ROPS for Wheeled Agricultural Tractors 1983) • Maintained in functional condition and replaced when necessary to assure proper performance

  6. Haulage Requirements • Requirements for ROPS • ROPS on Loader - 56.14130 (a) (SAE J1040) Performance Criteria for ROPS Structures for Construction, Earthmoving, Forestry and Mining Machines 1986 or • ROPS on Loader - 56.14130(a) (SAE J1194 ROPS for Wheeled Agricultural Tractors 1983)

  7. ROPS • Rollover Protective Structure • Permanent label affixed to structure with • Manufacturer’s Name & Address • Make and Model Number of Equipment • Installed per Manufacturer’s Recommendations • Re-certified by Manufacturer or Registered Professional Engineer with knowledge and experience in ROPS design after rollover of abnormal structural load, alterations or repair

  8. FOPS • Falling Object Protection 56.14106 for forklifts, front end loader and bulldozers • when used in area when hazard could be created • Capable of withstanding loads to which it would be subjected

  9. Brakes • Service Brakes - 56.14101(a)(1) • Service brake system capable of stopping and holding the equipment with its typical load on the maximum grade it travels • Parking Brakes - 56.14101(b)(2) • Parking brakes capable of stopping and holding the equipment with its typical load on the maximum grade it travels

  10. Brake Test Requirements • Brake Test - 56.14101(b)(3) • Conducted under the direction of the mine operator in cooperation with the instructions provided by the MSHA Inspector only when: • Equipment capable of travelling between 10 & 20 mph • Where there is an appropriate test site • Front-end loaders have bucket empty • Mobile Equipment is not carrying explosives

  11. Brake Test Procedures • Brake Test - 56.14101(b)(3) • Equipment must reach and maintain a constant speed between 10 & 20 mph prior to enter 100 ft test site • Roadway must be wide enough for equipment and must be level, dry and packed • Braking with those systems used under normal operating conditions (no parking brakes) • In proper gear for the appropriate speed

  12. Brake Test Evaluation • Brake Test - 56.14101(b)(4) • Stopping distances measures from point where operator receives signal to stop to actual stopping distance • Must be within chart in Table 1 • If not, operator may request up to 4 more test runs ( 2 in each direction) of which on 3 must meet the appropriate stopping distances for speed and vehicle weight

  13. Back-up Alarms • Back-up Alarms 56.14132(a) -When operator has obstructed view to the rear: • Automatic reverse activated signal alarm • Wheel mounted bell alarm • Discriminating backup alarm covers area of view • Observer (spotter) 56.9305(c) truck must stop when unable to clearly recognize spotter’s signals • All alarms above surrounding noise levels • Automatic reverse activated at night

  14. Windows • Windows 56.14103(a) - If Windows are provided: • Made of safety glass or equivalent • Maintained to provide safe operation • Replaced or removed if damaged and obscures visibility

  15. Fire Extinguishers • Fire Extinguishers on Mobile Equipment • 56.4230(a) - Whenever a fire or its effects can impede escape from mobile equipment or • 56.4230(b) can impede the escape of others in the area, extinguisher must be on vehicle or within a 100 feet of equipment • Located to permit use • Fire Suppression system can be substituted if it can be activated manually

  16. Warning Signals • Warnings 56.14200 - Mobile Equipment Before moving any equipment: • Sound a warning that is audible above surrounding area or • Use other effective means to warn persons

  17. Securing Movable Parts • Warnings 56.14206 - Mobile Equipment • When moving any equipment: • Parts of equipment must be in travel mode • Mechanically secured • Getting Off Equipment - 56.9318 • Persons cannot get off moving mobile equipment • Clearances 56.9306 - Warning devices • Devices installed and restricted area marked

  18. Unattended or Not in Use • Securing Parts 56.14206(b) - Equipment When equipment is unattended or not in use: • Parts of equipment must be lowered to ground • Mechanically secured • Parking Procedures 56.14207 Equipment not left unattended unless: • Placed in park and parking brake set, wheels chocked

  19. Warning Devices • Warning Devices 56.14208 • When parked and creates a hazard • When carrying load that project more than 4 feet beyond sides or rear • Must have visible warning device (Red Flag) attached to end of load or person walking beside or behind load with flag or light • Must use light in limited visibility condition

  20. Movement of Buckets • Movement of Buckets, Dippers, Booms 56.14210 • Not be swung over Operator’s station on Mobile Equipment until operator is out of station and in a safe location • Does not apply to equipment specially designed to protect operator from falling objects (FOPS)

  21. Transporting People • Transporting People 56.9200(a) Persons Not Transported in or on: • dippers, forks, clamshells, buckets • in beds of mobile equipment • on the top of loads, with materials/equipment • outside cabs, equipment stations • between cars on trains, on leading ends • to and from work areas on crowded equipment • on conveyors

  22. Transporting People • Transporting People 56.9200(b) • Persons Transported in beds of mobile equipment when provisions are made for secure travel and means are taken to prevent accidental unloading if equipment is provided with unloading device • when necessary for maintenance, testing or training and above provisions taken • On conveyors when designed for such travel

  23. Working in Raised Position • Blocking of Equipment 56.14211 • Persons cannot work on top, under or from Mobile Equipment in a raised position until the equipment has been blocked or mechanically secured from movement • provided with a functional load locking device or equivalent • Repairs During Maintenance 56.14105 • Blocked against motion/power off (lockout)

  24. Berms • Berms or Guardrails 56.9300(a) must be provided and maintained: • On banks of roadways where a drop off of sufficient grade and depth may cause a vehicle to overturn or endanger equipment operators • Must be at least mid-axle height of largest vehicle • Have openings for drainage

  25. Berms Not Required • Berms or Guardrails 56.9300(d) may not be required provided that and elevated roadways are infrequently traveled and used by service or maintenance vehicles • And locked gates are installed at entrance points • Warning signs posted “Roadway NOT bermed” • Delineators installed at intervals (3) to indicate edge • Maximum speed limit is posted (slope,width,type) • Road surface traction not impaired by weather

  26. Tire Repairs • Tire Repairs 56.14104 • Before a tire can be removed, the valve cord must be partially removed for gradual deflation of the tire and persons must stand outside the potential trajectory of the locking rim of a multi-piece rim • During inflation a wheel cage or other restraining device or stand off inflation device must be used

  27. Traffic Control • Traffic Control 56.9100 Safe Movement • Rules governing: • Speed, Right of Way, Movement of Direction, and Use of Headlights to assure visibility must be established at each mine and followed • Signs or signals, warning of hazards shall be placed at appropriate locations

  28. Operating Speed • Traffic Control 56.9101 • Maintain control of vehicle • Operating speeds consistent with: • conditions of roadways • tracks, grades, clearance • visibility, traffic • type of equipment used

  29. Loading • Loading/ Hauling in Safe Manner -56.9201 • Prevent Spillage - 56.9202 Mobile Equipment loaded in a manner to minimize spillage • Activity Between Equipment & Machinery- 56.3430 - Persons cannot work, travel only for dismounting purposes

  30. Carrying Explosives • Carrying Explosives - 56.6202(a) • Maintained in good condition and equipped: • With sides and enclosures higher than explosive materials or explosives secured to non-conductive pallet • With separate cargo space • Two fire extinguishers or one and fire suppression • Posted with appropriate warning signs • Occupied by personnel necessary for handling explosives

  31. Carrying Explosives • Carrying Explosives - 56.6202(a) • Maintained in good condition and equipped: • Attended or cargo compartment locked, except when parked at blast site and loading in progress • Secured while parked by: • having brakes set • Wheels chocked if movement can occur • Engine shut off unless powering device is being used • Have no sparking materials exposed in cargo area • Have non-sparking materials properly secured

  32. Fueling • Fueling Internal Combustion Engines • 56.4103 Engines shall be shut off during fueling when tanks are integral part of equipment, does not apply to diesel powered engines

  33. Safe Operating Procedures • Powered Haulage has had more miner fatalities than any other accident classification: • Providing safe access on and off mobile equipment helps prevents slips, trips, & falls • Conducting a pre-shift inspection of the equipment and of the surrounding ground helps preventaccidents due to equipment failures and collapse of ground

  34. MSHA Inspection • Haulage equipment continues to receive the highest priority during an inspection by MSHA • Seat belt violations are of special interest to every inspector • Any equipment brought into a mine can be subject to a MSHA Inspection

More Related