1 / 28

Lecture 6: Thermo and Entropy

Lecture 6: Thermo and Entropy . Reading: Zumdahl 10.2, 10.3 Outline Isothermal processes Isothermal gas expansion and work Reversible Processes. Weight and Entropy. The connection between weight ( W ) and entropy (S) is given by Boltzmann’s Formula: S = k ln W.

gyan
Télécharger la présentation

Lecture 6: Thermo and Entropy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 6: Thermo and Entropy • Reading: Zumdahl 10.2, 10.3 • Outline • Isothermal processes • Isothermal gas expansion and work • Reversible Processes

  2. Weight and Entropy • The connection between weight (W) and entropy (S) is given by Boltzmann’s Formula: S = k lnW k = Boltzmann’s constant = R/Na = 1.38 x 10-23 J/K • The dominant configuration will have the largest W; therefore, S is greatest for this configuration

  3. Example: Crystal of CO • For a mole of CO: W = Na!/(Na/2!)2 = 2Na • Then, S = k ln(W) = k ln (2Na) = Nak ln(2) = R ln(2) = 5.64 J/mol.K

  4. Another Example: Expansion • What is DS for the expansion of an ideal gas from V1 to 2V1? • Focus on an individual particle. After expansion, each particle will have twice the number of positions available.

  5. Expansion (cont.) • Note in the previous example that weight was directly proportional to volume. • Generalizing: DS = k ln (Wfinal) - kln(Winitial) = k ln(Wfinal/Winitial) = k ln(Wfinal/Winitial) = Nk ln(Wfinal/Winitial) for N molec. = Nkln(Vfinal/Vinitial)

  6. Isothermal Processes • Recall: Isothermal means DT = 0. • Since DE = nCvDT, then DE = 0 for an isothermal process. • Since DE = q + w: q = -w (isothermal process)

  7. Example: Isothermal Expansion • Consider a mass connected to a ideal gas contained in a “piston”. Piston is submerged in a constant T bath such that DT = 0.

  8. Isothermal Expansion (cont.) • Initially, V = V1 P = P1 • Pressure of gas is equal to that created by mass: P1 = force/area = M1g/A where A = piston area g = gravitational acceleration (9.8 m/s2)

  9. Isothermal Expansion (cont.) • One-Step Expansion. We change the weight to M1/4, then Pext = (M1/4)g/A = P1/4 • The mass will be lifted until the internal pressure equals the external pressure. In this case Vfinal = 4V1 • w = -PextDV = -P1/4 (4V1 - V1) = -3/4 P1V1

  10. Two Step Expansion (cont.) • Graphically, we can envision this two-step process on a PV diagram: • Work is given by the area under the “PV” curve.

  11. Two Step Expansion • In this expansion we go in two steps: Step 1: M1 to M1/2 Step 2: M1/2 to M1/4 • In first step: Pext = P1/2, Vfinal = 2V1 • w1 = -PextDV = -P1/2 (2V1 - V1) = -1/2 P1V1

  12. Two Step Expansion (cont.) • In Step 2 (M1/2 to M1/4 ): Pext = P1/4, Vfinal = 4V1 • w2 = -PextDV =- P1/4 (4V1 - 2V1) = -1/2 P1V1 • wtotal = w1 + w2 = -P1V1/2 - P1V1/2 = -P1V1 • wtotal,2 step > wtotal,1 step

  13. Infinite Step Expansion (cont.) • Graphically: Two Step Reversible

  14. Infinite Step Expansion • Imagine that we perform a process in which we change the weight “infinitesimally” between expansions. • Instead of determining the sum of work performed at each step to get wtotal, we integrate:

  15. Infinite Step Expansion (cont.) • If we perform the integration from V1 to V2:

  16. Two Step Compression • Now we will do the opposite….take the gas and compress: Vinit = 4V1 Pinit = P1/4 • Compression in two steps: first place on mass = M1/2 second, replace mass with one = M1

  17. Two Step Compression (cont.) • In first step: w1 = -PextDV = -P1/2 (2V1 - 4V1) = P1V1 • In second step: w2 = -PextDV = -P1 (V1 - 2V1) = P1V1 • wtotal = w1 + w2 = 2P1V1 (see table 10.3)

  18. In two step example: wexpan. = -P1V1 wcomp. = 2P1V1 wtotal = P1V1 qtotal = -P1V1 We have undergone a “cycle” where the system returns to the starting state. Compression/Expansion • Now, DE = 0 (state fxn) • But, q = -w ≠ 0

  19. Let’s consider the four-step cycle illustrated: 1: Isothermal expansion 2: Isochoric cooling 3: Isothermal compression 4: Isochoric heating Defining Entropy

  20. Step 1: Isothermal Expansion at T = Thigh from V1 to V2 Now DT = 0; therefore, DE = 0 and q = -w Do expansion reversibly. Then: Defining Entropy (cont)

  21. Step 2: Isochoric Cooling to T = Tlow. Now DV = 0; therefore, w = 0 q2 = DE = nCvDT = nCv(Tlow-Thigh) Defining Entropy (cont)

  22. Step 3: Isothermal Compression at T = Tlow from V2 to V1. Now DT = 0; therefore, DE = 0 and q = -w Do compression reversibly, then Defining Entropy (cont)

  23. Step 4: Isochoric Heating to T = Thigh. Now DV = 0; therefore, w = 0 q4 = DE = nCvDT = nCv(Thigh-Tlow) = -q2 Defining Entropy (cont)

  24. Defining Entropy (cont)

  25. Defining Entropy (end) The thermodynamic definition of entropy (finally!)

  26. Calculating Entropy DT = 0 DV = 0 DP = 0

  27. Calculating Entropy • Example: What is DS for the heating of a mole of a monatomic gas isochorically from 298 K to 350 K? 3/2R

  28. Connecting with Dr Boltzmann • From this lecture: • Exactly the same as derived in the previous lecture!

More Related