1 / 15

Noshin Omar, Joeri Van Mierlo, Peter Van den Bossche

Assessment of performances of various lithium-ion chemistries for Plug-in Hybrid Electric Vehicles. Noshin Omar, Joeri Van Mierlo, Peter Van den Bossche. Belgian platform on electric vehicles # 3. noshomar@vub.ac.be slide 1. Overview. Introduction Battery requirements for PHEV

hakeem-dillon
Télécharger la présentation

Noshin Omar, Joeri Van Mierlo, Peter Van den Bossche

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Assessment of performances of various lithium-ion chemistries for Plug-in Hybrid Electric Vehicles Noshin Omar, Joeri Van Mierlo, Peter Van den Bossche Belgian platform on electric vehicles # 3 noshomar@vub.ac.be slide 1

  2. Overview • Introduction • Battery requirements for PHEV • Test methodology • Ragone plot • Battery characteristics • Economic and life cycle considerations • Summary and conclusions

  3. Introduction • Plug-in hybrid electric vehicles have received considerable attention due to: • Reduce gasoline consumption • Decrease green house gas emissions

  4. Battery requirements Source; 1. A. Pesaran, “ Battery Requirements for Plug-In Hybrid Electric Vehicles –Analysis and Rationale”, EVS23, 2007, California, USA 2. P. Van den Bossche, “SUBAT: An assessment of sustainable battery technology”, Journal of Power Sources, 2005 3. J. Axsen, “Batteries for Plug-in Hybrid Electric Vehicles (PHEVs):Goals and the State of Technology circa 2008, May, 2008

  5. Test Methodology

  6. Ragone plot • LNMCO based cells: 126 – 149Wh/kg • LFP based cells: 75 – 118Wh/kg • LNCA: 90Wh/kg • The situation regarding the power density is not clear due to the wide range Power density: Max. Current rate, 50% SoC, 10 sec. Pulse

  7. Energy and discharge performances

  8. Power performances

  9. Charge capabilities

  10. Life cycle LFP NMC NCA

  11. SoC determination

  12. Peukert and SoC

  13. Summary

  14. Conclusions • LNMC based cells: • Pro: higher energy, energy efficiency, SoC determination • Con: thermal stability, cost • LFP based cells: • Pro: high power density, favourable thermal performances, cost • Con: low energy density, lower energy efficiency, SoC determination • LNCA in the postive electrode: • Pro: high energy efficiency, SoC determination • Con: low energy density, power density, less thermal performances, cost, life cycle • Control strategy in PHEV application is a key issue

  15. Contacts Vrije Universiteit Brussel Department of Electrical Engineering Pleinlaan 2, 1050, Brussel Belgium noshomar@vub.ac.be

More Related