1 / 16

H-Bridge Demystified

H-Bridge Demystified. Basic electronic theory How H-Bridges work Explain terminology Explain where the power goes. Basic Theory: Ohms law. Power = Voltage * Current Voltage = Current * Resistance Examples: .5A * 10 ohms = 5v 5v * .5A = 2.5 watts .5v / .05 ohms = 10a 10a * .5v = 5 watts

haleyd
Télécharger la présentation

H-Bridge Demystified

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. H-Bridge Demystified Basic electronic theory How H-Bridges work Explain terminology Explain where the power goes

  2. Basic Theory: Ohms law • Power = Voltage * Current • Voltage = Current * ResistanceExamples: • .5A * 10 ohms = 5v • 5v * .5A = 2.5 watts • .5v / .05 ohms = 10a • 10a * .5v = 5 watts • Power = Current^2 * resistance

  3. Basic Theory: Inductors • V = L * dI/dT - What does that mean??? • Current rises indefinitely based upon inductance and voltage.

  4. Basic Theory: Real Inductors • Real inductors have resistance • Current * resistance = voltage • Eventually current levels out • Strength of magnetic field + level of stored energy are proportional to the current.

  5. Basic Theory: Inductors • What happens when switch is opened? • Current dissipates quickly in the ARC

  6. Basic Theory: Inductors • Diodes used to suppress arcing • Recirculating currents dissipate slower • Note: current continues to flow in inductor • Power is dissipated across diode & inductor internal resistance.

  7. Basic Theory: PMDC motor • PMDC motors can be modeled as an inductor, a voltage source and a resistance. • Torque is proportional to the current • The internal voltage source is proportional to the RPM (Back-EMF) • Stall current/max torque is proportional to the internal resistance.

  8. How H-Bridge works Off Forward Reverse

  9. How H-Bridge Works • This represents traditional PWM motor control • Note low average current flow

  10. H-Bridge: Synchronous Rectification • Use switches instead of diodes • Much more efficient, regenerative braking

  11. H-Bridge Locked-Antiphase • Pro: one line needed for forward/reverse • Con: higher frequencies needed

  12. Locked Antiphase • Voltage swings from +V to –V • No rectification needed • Current ripple twice as large

  13. H-Bridge Examples L293, L298, MC33886, TLE5206, TPIC0108b, etc Simple logic: output = input. Some chips have disables to disconnect all outputs. Advance chips output protection.

  14. H-Bridge Examples LM18200, TLE5205, TPIC0107b, etc.

  15. Demonstration • Actual current flow & voltage charts • Resistor • Inductor (motor) • No load • Load (power delivered) • Negative Load (Regenerative braking)

  16. H-Bridge/Inductor Demonstration V = IR V = V+ V = 0 (V = -IR) V = IR

More Related