1 / 27

Lab IV Lecture 1

Lab IV Lecture 1. Course Overview Introduce Step 1 Course Web Page: http://www.ece.drexel.edu/courses/ECE-L304. Course Goals. Provide a practical experience in circuit prototyping Integrate analog and digital circuit design concepts Increase OrCAD skills

hammett-douglas
Télécharger la présentation

Lab IV Lecture 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lab IV Lecture 1 Course Overview Introduce Step 1 Course Web Page: http://www.ece.drexel.edu/courses/ECE-L304

  2. Course Goals • Provide a practical experience in circuit prototyping • Integrate analog and digital circuit design concepts • Increase OrCAD skills • Incorporate system-level and scheduling considerations

  3. What Do We Expect of You? • Attendance in lab lecture • Attendance in lab hours • You can work in a group of 2 and turn in one report • You will attend the lab section listed on your schedule • Work outside of lab hours • This course is usually not finished in the allotted lab time

  4. What Should You Expect? • The materials and documentation needed to perform the project • Grade feedback on a timely basis • Answers to your questions

  5. Grading Policy • The deliverables for each step of the project will receive a numerical grade. The grades for steps which involve circuit design and construction will have several parts, including design, functionality, and quality of construction. • Multi-week labs will receive greater weight

  6. Grading Policy • Pre-labs must be turned in with lab reports. • Deliverables are due no later than one week after your scheduled lab meeting. Reports which are late will lose 10% per week until four week have gone by, at which time the report will not be accepted.

  7. Grading Policy • Grading • 10% quizzes (2) • 90% labs (7 reports) • Standard Grade Distribution • ≥ 90% A • 80 - 90 B • Etc.

  8. The Overall Idea • Design, build, debug and verify a digital recording circuit, or data acquisition system • Accept analog information • Convert to digital form • Save to RAM • Convert back to analog form • Output across a load

  9. Data Bus 8 8 ADC RAM DAC Control The Overall Idea

  10. The Overall Idea • Ideally we would like to be able to record an audio (voice) message and then play it back. • We will see that there are real-world limitations that will limit our success, and some compromises will be needed.

  11. Step by Step • Step 1 Review of ADC and DAC - simulation • Step 2 Build the ADC circuit - hardware • Step 3 Build the DAC circuit - hardware • Step 4 Introduce static RAM - simulation • Step 5 Build the on-board clock - hardware • Step 6 Introduce control logic - hardware • Step 7 Final changes - hardware

  12. Step 1- Review of DAC/ADC • A simulation-based exercise • Observe how analog signals are converted to digital signals • Observe how digital signals are converted to analog signals • The circuits observed are much simpler than those in the hardware you will use, but the concepts are similar

  13. Step 1 Prelab • Read “Memory devices, timing models, and hierarchical blocks”, A. Motley, MicroSim Corporation, April 1997 through the “The Supporting Logic” section. • Review ADC, DAC experiments from ECEL 303 Lab III. • Find a box to safely carry around your circuit (6” x 8” x 3” min).

  14. Step 1 Tasks • Perform simulation • Follow instructions on web site • Lab Instructions:Step 1 • Complete “Workbook”

  15. Step 1 Method • Think • Discuss • Draw • Simulate • Compare • Redraw if needed, but don’t erase

  16. Digital to Analog Conversion • Digital signals have discrete levels • MSB - highest weight • LSB - lowest weight • We must convert each N-bit binary value to a unique analog voltage

  17. Discrete DAC

  18. Discrete DAC 4-bit counter (not part of DAC) TTL voltage levels Summing Amplifier The values of the resistors in the input network of the summing amplifier determines the “weights” of the digital bits.

  19. Analog to Digital Conversion

  20. ADC - Input Side Schmidt Trigger Analog Input Voltage Comparator “DAC” signal from R-2R Network

  21. ADC- Internal Voltage Generation Binary Counter R-2R Network D-Flip Flop

  22. ADC Types • The ADC chip we will use (ADC0804) is based on a successive approximation (SA) algorithm • The SA Register and Latch (see the functional diagram on the datasheet, p. 6-6) works like the 74161 counter in our simulation. The Ladder and Decoder contains the R-2R network. • The SA converter type is one of the most commonly used

  23. Resolutions of ADC Types Source: Aspects of data acquisition system design, P. Miller, TI Analog Applications, Analog and Mixed-Signal Products, August 1999.

  24. Speeds of ADC Types Source: Aspects of data acquisition system design, P. Miller, TI Analog Applications, Analog and Mixed-Signal Products, August 1999.

  25. Step 1 Deliverables • A completed Chapter 11 workbook • Discrete DAC summing ckt schematic • Discrete DAC summing ckt simulation • Integrated Ckt ADC schematics • Integrated Ckt ADC simulation • Answer Questions • Discrete Analog-to-Digital for extra credit (10%) • Due 1 week after lab date, in 7-205

More Related