1 / 18

AMS Superconducting Magnet Burst Disc Testing April 2007 Steve Harrison Scientific Magnetics

AMS Superconducting Magnet Burst Disc Testing April 2007 Steve Harrison Scientific Magnetics. The AMS magnet has vessels and potential trapped volumes protected by burst discs. The qualification procedure for the burst discs was agreed with the PSRP in November 2003 (Trent Martin).

heath
Télécharger la présentation

AMS Superconducting Magnet Burst Disc Testing April 2007 Steve Harrison Scientific Magnetics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AMS Superconducting MagnetBurst Disc Testing • April 2007 • Steve HarrisonScientific Magnetics

  2. The AMS magnet has vessels and potential trapped volumes protected by burst discs. • The qualification procedure for the burst discs was agreed with the PSRP in November 2003 (Trent Martin).

  3. “To supply two bursting discs for the flight or STA systems, six burst discs must be manufactured. All six discs will be identical and four of the six will be vibrated at operating temperature and then burst. • Data will be recorded to show bursting temperature and pressure for each qualification disc burst. • Assuming the four discs tested have been acceptable the remaining two will then be considered flight qualified.”

  4. The design of the discs was also agreed with the NASA Safety Panel. Reverse-buckling bladed discs were not preferred for liquid service as they may not open fully.

  5. The burst discs are reverse-buckling with a peripheral score and cutting teeth in the vent ring. It was agreed that this design is intrinsically single-fault tolerant.

  6. Prototype discs were deliberately burst at ambient and cryogenic temperatures …

  7. … before and after vibration testing.

  8. Qualification discs are all vibration tested then deliberately burst. Both vibration and burst tests are undertaken at the operating temperature of the disc. • Nearly all the flight discs have been completed.

  9. BD05 type ambient temperature burst disc (10 bar).

  10. BD06 type ambient temperature burst disc (2 and 3 bar double unit).

  11. BD03 cryogenic burst discs ready for cryogenic vibration test.

  12. BD03 cryogenic burst test just completed.

  13. BD03 cryogenic burst discafter burst test.

  14. BD03 type cryogenic burst disc(3 bar +0/-10%).

  15. BD02 cryogenic burst disc and test insert.

  16. BD02 type cryogenic burst disc(20 bar +0/-10%).

  17. Manufacture and qualification of ambient temperature and cryogenic burst discs is nearly complete. All discs have burst within the specified limits.

More Related