Maintaining a 1911 Handgun Your Complete Guide

1. Maintaining a 1911 Handgun: Your Complete Guide

2. When maintained properly, 1911 handguns can be the most-shootable guns ever devised. They were combat semi- auto handguns for decades, but today they are widely used due to their great ergonomics, extra capacity, and excellent reliability. In this post, we will see the best way to clean and maintain a 1911 handgun so that it can function efficiently and last longer. Cleaning 1911 Handgun 1911 handguns cannot be treated like a Glock and are expected to perform to their full potential. A 1911 handgun requires a little cleaning and maintenance regularly. It needs to be done constantly, mostly after a shooting session. Basic cleaning is sufficient, which should include cleaning the rails and running a swab through the barrel using any commercial cleaner. You may also use a paper towel for wiping the rails and then run a patch down the bore. After this, you can run a toothbrush between the extractor and the breech face to remove any debris that may be trapped there. Tearing into the frame is not always necessary. You can clean out the inside of the frame after 500 rounds or so. You can tear it apart only if you are handy enough with 1911. You will find lint build-up inside the frame of the handgun. Make sure that you also inspect the parts for corrosion, especially if you stay in humid climates. You may also look for basic cleaning kits that include everything you need to clean the gun, like a barrel bushing wrench, a polymer tool for cleaning frame rails, and an extractor brush. The correct way of cleaning the 1911:

3. Unload it: remove the magazine and use the slide to hold it open. You can use this chance to verify that the chamber is empty. Do not “assume” that it has been cleared. Read the manual: since technology development can change the materials, machining, and design changes, it is necessary that you read the manual that has come with the product. It can prevent a lot of mistakes. Recoil the spring plug: always remove the recoil plug first to release the tension in the parts of the gun. It will be the first item out and the last one in. If the slide is in place, there will be only one direction the spring plug can go, which is controlled by your hand. Lubrication of 1911 Handguns Avoid running a 1911 handgun dry. But neither should it be dripping with oil. You can use thinner oil and stay away from thicker ones. You only need to oil places like the rails and where the barrel hood meets the portion of the barrel where it meets the bushing. You may also put a little oil into the locking lugs where the barrel and the slide meet. A small drop of oil on top of the disconnector is enough to lubricate the firing mechanism without disassembling the frame. Maintaining 1911 Handgun The recoil and firing pin springs are the most consumable parts of a 1911 handgun. While it is unclear how often the springs need to be replaced, do not fix it until it is broken. You can go up to 2500-5000 rounds before replacing the recoil springs. However, this may depend on the type of recoil spring being used. The sear springs and mainsprings rarely need a replacement. It is recommended that the swapping recoil springs are replaced every 3000 rounds.

4. Inspecting a 1911 Handgun Gun cleaning sessions are a perfect chance to inspect your handguns. It is an ideal time to check for cracks and broken or worn parts. So, during your cleaning session, make sure that you pay attention to the extractor, as the hook can break off sometimes. Another potential problem area is the ejector, which can break every now and then since it has two tongues that stick down into the frame and can break off. Also, look closely at the extended area of the ejector that pushes on your brass. Remember that safety cheeks are always a good idea. To ensure the safety is functioning properly with the gun unloaded. One important thing to remember is that you may find a scratch that curves downward from the slide top toward the trigger guard. This is a common problem that is entirely preventable. So when you reassemble the handgun, press the slide stop straight into position rather than turning it into place. To make this task easier, you can fill a small bevel at the right spot on the backside of the part. However, this hack is better suited for an expert. The Bottom Line It may be concluded that 1911 handguns are demanding and prone to constant breakage and malfunction. However, this may just be a misconception. 1911s have served the US for decades. They have been used in military combat and remained in service with special operations for a long time. So it will take care of you only if you care for it correctly. Also, remember that not all 1911 are created equal. So look for a brand and model known for offering quality and reliability.

5. Source URL: https://playstoreapk.com/maintaining-a-1911-handgun-your- complete-guide/