1 / 43

CS 39R

CS 39R. Carlo H. Séquin. Single-Sided Surfaces. EECS Computer Science Division University of California, Berkeley. Twisting a ribbon into a Möbius band. Making a Single-Sided Surface. Simple Möbius Bands. A single-sided surface with a single edge :. A closed ribbon with a 180°flip.

hollyc
Télécharger la présentation

CS 39R

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CS 39R Carlo H. Séquin Single-Sided Surfaces EECS Computer Science Division University of California, Berkeley

  2. Twisting a ribbon into a Möbius band Making a Single-Sided Surface

  3. Simple Möbius Bands • A single-sided surface with a single edge: A closed ribbon with a 180°flip. A closed ribbon with a 540°flip.

  4. More Möbius Bands Max Bill’s sculpture of a Möbius band. The “Sue-Dan-ese” M.B., a “bottle” with circular rim.

  5. A Möbius Band Transfromation Widen the bottom of the band by pulling upwards its two sides,  get a Möbius basket, and then a Sudanese Möbius band.

  6. Many Different Möbius Shapes Left-twisting versions shown – can be smoothly transformed into one another • Topologically, these are all equivalent:They all are single-sided,They all have ONE rim,They all are of genus ONE. • Each shape is chiral: its mirror image differs from the original.

  7. These are NOT Möbius Bands ! • What you may find on the Web under “Möbius band” (1):

  8. These are NOT Möbius Bands ! • What you may find on the Web under “Möbius band” (2):

  9. These are NOT Möbius Bands ! • What you may find on the Web under “Möbius band” (3):

  10. TWO Möbius Bands ! • Two Möbius bands that eventually get fused together:

  11. Topological Surface Classification The distinguishing characteristics: • Is it two-sided, orientable – or single-sided, non-orientable? • Does it have rims? – How many separate closed curves? • What is its genus? – How many handles or tunnels? • Is it smooth – or does it have singularities (e.g. creases)? Can we make a single-sided surface with NO rims?

  12. Classical “Inverted-Sock” Klein Bottle

  13. Can We Do Something Even Simpler? • Yes, we can! • Close off the rim of any of those Möbius bands with a suitably warped patch (a topological disk). • The result is known as the Projective Plane.

  14. The Projective Plane -- Equator projects to infinity. -- Walk off to infinity -- and beyond …come back from opposite direction: mirrored, upside-down !

  15. The Projective Plane is a Cool Thing! • It is single-sided:Flood-fill paint flows to both faces of the plane. • It is non-orientable:Shapes passing through infinity get mirrored. • A straight line does not cut it apart!One can always get to the other side of that line by traveling through infinity. • It is infinitely large! (somewhat impractical)It would be nice to have a finite model with the same topological properties . . .

  16. Trying to Make a Finite Model • Let’s represent the infinite plane with a very large square. • Points at infinity in opposite directions are the same and should be merged. • Thus we must glue both opposing edge pairs with a 180º twist. Can we physically achieve this in 3D ?

  17. Cross-Surface Construction

  18. Wood / Gauze Model of Projective Plane Cross-Surface = “Cross-Cap” + punctured sphere

  19. Cross-Cap Imperfections • Has 2 singular points with infinite curvature. • Can this be avoided?

  20. Steiner Surface (Tetrahedral Symmetry) Plaster model by T. Kohono A gridded model by Sequin Can singularities be avoided ?

  21. Can Singularities be Avoided ? Werner Boy, a student of Hilbert,was asked to prove that it cannot be done. But he found a solution in 1901 ! • It has 3 self-intersection loops. • It has one triple point, where 3 surface branches cross. • It may be modeled with 3-fold symmetry.

  22. Main Characteristics of Boy’s Surface Key Features: • Smooth everywhere! • One triple point, • 3 intersection loops emerging from it.

  23. Various Models of Boy’s Surface

  24. Projective Plane With a Puncture The projective plane minus a disk is: • a Möbius band; • or a cross-cap; • or a Boy cap. • This makes a versatile building block! • with an open rim by which it can be grafted onto other surfaces.

  25. Another Way to Make a Boy Cap Frame the hole with 3 opposite stick-pairs and 6 connector loops: Similar to the way we made a cross cap from a 4-stick hole:

  26. Mӧbius Band into Boy Cap • Credit: Bryant-Kusner

  27. Geometrical Surface Elements “Cross-Cap”“Boy Cap”“Boy Cup” • Single-sided surface patches with one rim. • Topologically equivalent to a Möbius band. • “Plug-ins” that can make any surface single-sided. • “Building blocks” for making non-orientable surfaces. • Inspirational design shapes for consumer products, etc.

  28. Boy Cap + Disk = Boy Surface Mӧbius Band + Disk = Projective Plane • In summary: • and: TWO Mӧbius Bands = Klein Bottle See: 

  29. KOJ = MR + ML 2 Möbius Bands Make a Klein Bottle

  30. Classical Klein Bottle from 2 Boy-caps BcL BcR BcL + BcR = KOJ “Inverted Sock” Klein bottle:

  31. Klein Bottle with S6 Symmetry • Take two complementary Boy caps. • Rotate left and right halves 180°against each other to obtain 3-fold glide symmetry, or S6 overall.

  32. Klein Bottle from 2 Identical Boy-caps BcL BcR BcR + BcR = K8R • There is more than one type of Klein bottle ! Twisted Figure-8 Klein bottle:

  33. Model the Shape with Subdivision • Start with a polyhedral model . . . Level 0 Level 1 Level 2

  34. Make a Gridded Sculpture!

  35. Increase the Grid Density

  36. Actual Sculpture Model

  37. S6 Klein Bottle Rendered by C. Mouradian http://netcyborg.free.fr/

  38. Fusing Two Identical Boy Surfaces • Both shapes have D3 symmetry; • They differ by a 60°rotation between the 2 Boy caps.

  39. Building Blocks To Make Any Surface • A sphere to start with; • A hole-punchto make punctures:Each increases Euler Characteristic by one. • We can fill these holes again with: • Disks:Decreases Euler Characteristic by one. • Cross-Caps: Makes surface single-sided. • Boy-caps: Makes surface single-sided. • Handles (btw. 2 holes): Orientability unchanged. • Cross-Handles (btw. 2 holes): Makes surface single-sided. Euler Char. unchanged

  40. Constructing a Surface with χ = 2 ‒ h • Punch h holes into a sphere and close them up with: cross-caps or Boy caps or Closing two holes at the same time: handles or cross-handles

  41. Single-sided Genus-3 Surfaces Renderings by C.H. Séquin Sculptures by H. Ferguson

  42. Concept of a Genus-4 Surface 4 Boy caps grafted onto a sphere with tetra symmetry.

  43. Genus-4 Surface Using 4 Boy-Caps Employ tetrahedral symmetry! ( 0°rotation between neighbors) (60°rotation between neighbors)

More Related