1 / 18

Sponsor Preview Final Presentation

Team Superior Tube. Sponsor Preview Final Presentation. Advisor: Dr. James L. Glancey Sponsor Contacts: James Brooks, Chris Nagele, and Jeff Mlynarski. 12/06/2013. Agenda. Introduction……………………………………………Stanley Anderson Scope…………………………………………………………. Mingze Niu

howie
Télécharger la présentation

Sponsor Preview Final Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Team Superior Tube Sponsor Preview Final Presentation Advisor: Dr. James L. Glancey Sponsor Contacts: James Brooks, Chris Nagele, and Jeff Mlynarski 12/06/2013

  2. Agenda • Introduction……………………………………………Stanley Anderson • Scope………………………………………………………….MingzeNiu • Wants, Needs, and Metrics…..…………………………..…MingzeNiu • Proposed Solution……………………………………...Kenneth Manley • Prototyping………………………………………...…Nicolette Grannum • Financial Overview…………………………………...Stanley Anderson • Path Forward……………………………………...…….Kenneth Manley

  3. Introduction • Company produces cold drawn tubes • Tubes must be cleaned to sell to clients • Long tubes are loaded into a basket and into the solvent

  4. The Problem • Solvent is n-Propyl Bromide or nPB • Aggressive solvent and hazardous at boiling • A refrigerated boundary layer keeps solvent vapors contained • Heated basket breaks the barrier causing solvent loss

  5. Project Scope • The team is to design a basket that will reduce solvent loss throughout the degreasing process when compared to the current basket design. • The team is to have significant testing and/or a model to prove that the design will work as proposed.

  6. Ranked Wants and Needs

  7. Metrics

  8. Proposed Solution • Metric measurements • Weight: 454 lbs • Factor of Safety: 10 • Points of Contact: 6 • Material Cost: ~ $18,500 • < • 10% additional loading area (800 sq. in.)

  9. How It Translates

  10. Prototype Testing and Goals • Outcomes • Confirm material selection • Determine practicality of insulation • Limitations • Test with temperature only, not actual solvent • Structural components and shape will not be tested

  11. Material Testing • Finite Element Analysis (FEA) validated structure, but cold barrier information is limited • Scale test using hot plate, water, and metal samples to show effectiveness of both material change and insulation • These samples were cross referenced and a general assumption that less heat released in the cold barrier would lead to decreased nPB loss Shown above: Titanium sample covered with a sample of Aerogel insulation and sealed with a rubber coating

  12. Material Test Results • The insulation reduced heat transfer by over eighty percent • Based on the design, energy deposited in the boundary layer is reduced • Reduction in nPB losses, creating a huge opportunity for savings

  13. Fabrication Process • Basket material available from titanium supplier • Transportation to and from the machinist is offered by supplier • From there the welding contact can fabricate the basket

  14. Financial Overview - Background • Overview of estimated solvent savings • Scenarios generated with the following assumptions • Two barrier breaks per dip • Losses per dip were the same • Low cost of capital • Fiver percent production growth rate

  15. Financial Overview – Analysis • Short term prospects for single baskets are dismal • Effect of the increased product load removes run time losses • After two years, the baskets will more than pay for themselves • If pursued, two baskets will be the best prospect

  16. Financial Overview – Continued • From here, the need for two baskets is apparent • The total savings counters the increased emissions • The scenario facilitates increased production

  17. Path Forward • Determine loading conditions of side and end meshes • Recommendation of the basket fabrication strategy • Develop more comprehensive financial strategy • Pursue design and implement the basket in facility

  18. Questions?

More Related