1 / 7

MyQ Garage Wi-Fi setup on Apple device

Follow these simple steps to set up your MyQ Garage Wi-Fi using your Apple device. Start by tapping the Settings icon and ensuring that your Wi-Fi is connected to your home network. Enable Bluetooth if it's off. Locate your MyQ device, and click to connect. Allow access for Wi-Fi settings sharing to enable connection to your network. Afterward, ensure your hub has a solid green LED, indicating a successful connection. Finally, download the MyQ app from the App Store for further functionality.

irma
Télécharger la présentation

MyQ Garage Wi-Fi setup on Apple device

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MyQ Garage Wi-Fi setup on Apple device Click each page to get to the next step

  2. 1. Tap the Settings icon

  3. 2. Make sure the Wi-Fi shows the name of the customer’s network (Home Router here) then tap Bluetooth.

  4. 3. If the Bluetooth is not on, turn it on by clicking the white button. You will see the MyQ-nnn under devices. Click the MyQ device and it will begin to connect. Note: nnn is the last three digits of the hub serial number.

  5. 4. It will show connected.

  6. 5. Once the apple device has connected to the MyQ Garage, a message will be displayed to Ignore or Allow the sharing of your home routers Wi-Fi settings, click Allow. This allows the Wi-Fi hub to copy the wireless network password and then connect to the wireless network.Note: The customer may receive a pop up that asks if they would like to download the app at the App Store. This only happens the first time the Wi-Fi is set up.

  7. 6. The apple device will then show Not Connected, at this point the hub has disconnected from the Bluetooth and is trying to connect to the wireless network. Check the hub for a solid green LED. Go to the App Store and download the MyQ app.

More Related