1 / 23

Woodwork Planes Quiz

Woodwork Planes Quiz. Try Plane. What is the correct name for this plane?…. Shoulder Plane. Smoothing Plane. Compass Plane. Rebate plane. Bull Nose Plane. Block Plane. Jack Plane. 2) On the diagram above indicate the dial that makes the blade move in and out.

isha
Télécharger la présentation

Woodwork Planes Quiz

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Woodwork Planes Quiz

  2. Try Plane • What is the correct name for this • plane?… Shoulder Plane Smoothing Plane Compass Plane Rebate plane Bull Nose Plane Block Plane Jack Plane

  3. 2) On the diagram above indicate the dial that makes the blade move in and out. (The blade adjustment nut )

  4. Sorry, Wrong try again.

  5. Sorry, Wrong try again and again.

  6. 3. Which of the following planes would be used to plane a long uneven edge? A Smoothing Plane A Jack Plane A Try Plane A Block Plane

  7. 4. The base of the plane is called ? Mouth Toe Sole Bottom Heel

  8. Try Plane 5. What is the correct name for this plane?… Shoulder Plane Smoothing Plane Compass Plane Rebate plane Bull Nose Plane Block Plane Jack Plane

  9. 6) In which direction should you plane to avoid splitting end grain

  10. Wrong, If you planed in this direction you will probably split the end grain here

  11. Correct

  12. 7. What is the correct name for this plane? Combination Plane Rebate Plane Compass Plane Shoulder Plane

  13. 8. What is the correct name for a square notch cut along the side of a board? Rebate Tongue Groove Chamfer

  14. Try Plane 9. What is the correct name for this plane?… Router Smoothing Plane Compass Plane Rebate plane Bull Nose Plane Block Plane Jack Plane

  15. Try Plane 10. What is the correct name for this plane?… Smoothing Plane Router Compass Plane Rebate plane Bull Nose Plane Block Plane Jack Plane

  16. 11. What is the correct name for a square notch cut along the centre of a board? Rebate Tongue Groove Chamfer

  17. 12. Which of the following planes would be used to produce a Groove?

  18. Concave curve Try Plane 13. Which plane would be most suited to finishing the inside of a concave curve?… Smoothing Plane Router Block Plane Rebate plane Bull Nose Plane Spoke shave Jack Plane

  19. Try Plane 14. What is the correct name for this plane?… Smoothing Plane Shoulder Plane Compass Plane Rebate plane Bull Nose Plane Block Plane Jack Plane

  20. 15. Which of the following planes would be used to level off the base of a through housing joint.

  21. 16. Which of the following planes would be used to plane a wide flat board? A Smoothing Plane A Jack Plane A Try Plane A Block Plane

  22. Quiz Completed Well Done

  23. Wrong Click here to try again

More Related