E N D
Reverse Engineering Circuit Board Documents Inputting Phase will follow below points: electronic turnkey solutions 1. Whether the information received in the pcb board cloning process is complete (including: schematic diagram, *.pcb file, bill of materials, PCB design description and PCB design or change requirements, standardization requirements description, process design description document) printed circuit boards assembly 2. Make sure the PCB template is up to date; 3. Confirm that the positioning device position of the template is correct; pcb board design guide 4. Whether the PCB reverse engineering description and the Reverse Engineering Circuit Board Documents or change requirements and standardization requirements are clear; 5. Confirm that the prohibited placement of devices and wiring areas on the outline drawing have been reflected on the PCB template; pcb reverse engineering technique 6. Compare the outline drawings to confirm that the dimensions and tolerances marked on the PCB are correct, and that the metallized holes and non-metallized holes are accurately defined; How to build a circuit board copy
7. After confirming that the PCB template is accurate, it is best to lock the structure file to avoid misoperation from being moved.