1 / 11

Buffer solutions

Buffer solutions. Lab 9. introduction. Adding trace amount of acid to water will result in increase in H + concentration. In the same manner, adding trace amount of alkali eg . NaOH to pure water will result in increase of OH −

ivi
Télécharger la présentation

Buffer solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Buffer solutions Lab 9

  2. introduction • Adding trace amount of acid to water will result in increase in H+ concentration. In the same manner, adding trace amount of alkali eg. NaOH to pure water will result in increase of OH− • So we can say that water has no ability to resist change in H+ concentration or pH. (pH = − log [H+])

  3. What is a buffer solution? • Buffer solution: • Is a system that possesses the property of resisting change in the pH with the addition of small amount of strong acid or base. • The efficiency of the system called buffer capacity.

  4. Composition • Buffer solution is usually composed of a weak acid and a salt of the acid eg. Acetic acid and sodium acetate, or weak base and a salt of the base eg. Ammonium hydroxide and ammonium chloride.

  5. Weak acid buffer • Weak acids do not completely dissociate when in solution, instead an equilibrium is set up;HA ⇌ H+ + A− • The dissociation constant or value is calculated by the following equation: • Where = salt • = acid

  6. Weak acid buffer • Dissociation constants of some weak acids at 25 °C

  7. Weak acid buffer • …… (1) • Since most values are small numbers its more convenient to express them as negative logarithm • p = − log • So equation (1) will be • and because pH = • Then= pH− • andpH = + • Weak acid buffer pH is ˂ 7

  8. Weak base buffer • BOH ⇌ B++ OH− • Similary, the dissociation constant, or Kbvalue of weak base is given by the equation: • Where B+ = salt • and = base • pH = − p Kb+ • = 14

  9. Practice problems • the dissociation constant Kaof acetic acid is 1.75 x 10-5at 25 °C. Calculate its pKavalue. • What is the pH of a buffer solution prepared with 0.05 M sodium borate and 0.005 M boric acid? The pKaof boric acid is 9.24 at 25 °C. • What is the pH of a buffer solution prepared with 0.05 M ammonia and 0.05 M ammonium chloride? The Kb of ammonia is 1.8 x 10-5 at 25 °C. • What molar ratio of salt/acid is required to prepare a sodium acetate-acetic acid buffer solution with a pH of 5.76? pKaof acetic acid is 4.76 at 25 °C.

  10. Practice problems • The molar ratio of sodium acetate to acetic acid in a buffer solution with a pH of 5.76 is 10:1. Assuming the total buffer concentration is 2.2 x 10-5mol/L, how many grams of sodium acetate (m.w. 82) and how many grams of acetic acid (m.w. 60) should be used in preparing a liter of the solution? • Calculate the change in pH after adding 0.04 mol of sodium hydroxide to a liter of buffer solution containing 0.2 M concentration of sodium acetate and acetic acid. The pKaof acetic acid is 4.76 at 25 °C. • What is the pH of buffer solution prepared with 0.055 M sodium acetate and 0.01 M acetic acid? The pKa of acetic acid is 4.76 at 25 °C.

  11. Home work • What is the change in pH with addition of 0.01 hydrochloric acid to a liter of buffer solution containing 0.05 M of ammonia and 0.05 M ammonium chloride? Kb of ammonia is 1.8 x 10-5 at 25 °C. • The dissociation constant of ethanolamine is 2.77 x 10-5 at 25 °C. Calculate pKb

More Related