1 / 4

Macpi 334 Electrical & Steam Heated Machine

A versatile Macpi 334 machine that is electrically and steam heated, with a set temperature of 132°C. It has a total consumption of 44,000 with an average electrical power of 14 kW/h and an average steam consumption of 4.0 kg/h. This machine offers precise surface temperatures and quick operation.

jamesgmiller
Télécharger la présentation

Macpi 334 Electrical & Steam Heated Machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Macpi 334, electrical + steam heated 132°C set 44.000 35 min. Electrical Consumption 14.000 06:35 Steam Consumption 80 min 35 min Total consumption: Average electrical power 14 kW/h + Average steam consumption 4,0 kg/h

  2. Macpi 334, electrical + steam heated versa DXT 1600 44.000 132°C, 15 sec. Macpi 334, 1600 14 kW/h + 4 kg steam/h 14.000 46.000 132°C, 15 sec. DXT 1600 14 kW/h 13.500

  3. Macpi 334, electrical + steam heated Surface Temperatures Set Temperature 132 °C, 15 sec.

  4. Macpi 334, electrical + steam heated Some impressions from a machine less than 0,5 year old. Insolation of the steam- and electrical elements. Not very sufficient and look like not very professional. The wiring is very confusing, which cable belongs to which heating element ? All bearings are not sealed and need constantly maintenance. Dust and dirt will accumulate on the grease and after some while will lead to some sluggishness. Even worst, when greasing is not done correctly, grease comes off the bearings everywhere and will soil other parts of the machine. On the machine shown grease was leaving the bearings towards the pressure rollers.

More Related