1 / 14

ES 202 Fluid and Thermal Systems Lecture 19: Models Versus General Substances (1/27/2003)

ES 202 Fluid and Thermal Systems Lecture 19: Models Versus General Substances (1/27/2003). Assignments. Homework: 7-62, 7-63 in Cengel & Turner Reading assignment 7-4, 7-5 and 7-6 in Cengel & Turner ES 201 notes. Announcements. Homework due today at 5 pm in my office

jessamine-frye
Télécharger la présentation

ES 202 Fluid and Thermal Systems Lecture 19: Models Versus General Substances (1/27/2003)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ES 202Fluid and Thermal SystemsLecture 19:Models Versus General Substances (1/27/2003)

  2. Assignments • Homework: • 7-62, 7-63 in Cengel & Turner • Reading assignment • 7-4, 7-5 and 7-6 in Cengel & Turner • ES 201 notes ES 202 Fluid & Thermal Systems

  3. Announcements • Homework due today at 5 pm in my office • Check the revised course syllabus on the course web page again. There are more changes. ES 202 Fluid & Thermal Systems

  4. Future Quieter Airplane!! primary stream secondary (bypass) stream Sawtooth geometry (chevron) in engine exhaust nozzle is shown to reduce engine noise. ES 202 Fluid & Thermal Systems

  5. Road Map of Lecture 19 • Quiz on Week 6 materials • Real gas versus ideal gas • notion of reduced coordinate • definition of compressibility factor • Z-chart • Ideal gas model • change in specific internal energy and specific enthalpy • change in specific entropy • Gibbs equation and its interpretation • variation of specific heats ES 202 Fluid & Thermal Systems

  6. Quiz on Week 6 Materials • Indicate in the following cases whether the given information is sufficient or insufficient in fully determining the thermodynamic state of the substance: • pressure and temperature in compressed liquid (YES) • pressure and temperature in superheated vapor (YES) • pressure and temperature in saturated mixture (NO) • pressure and temperature in saturated vapor (YES) • pressure and specific volume in saturated liquid (YES) • pressure and specific entropy in saturated mixture (YES) • temperature and specific enthalpy in superheated vapor (YES) • quality and temperature in saturated mixture (YES) • Given the following limited data from a property table of water at a pressure of 2 MPa: • h = 3023.5 kJ/kg at T = 300 deg C • h = 3137.0 kJ/kg at T = 350 deg C What is h at T = 330 deg C and P = 2 MPa? (h = 3091.6 kJ/kg) ES 202 Fluid & Thermal Systems

  7. Quiz on Week 6 Materials (Cont’d) • According to the Compressed Liquid Approximation, how are the following thermodynamic properties approximated in the compressed liquid region: • Sketch two constant pressure curves (P = P1, P = P2with P1 < P2) on the T-v diagram. Indicated clearly their behavior in the two-phase region and label them clearly. • Sketch two constant temperature curves (T = T1, T = T2with T1 < T2) on the P-v diagram. Indicated clearly their behavior in the two-phase region and label them clearly. ES 202 Fluid & Thermal Systems

  8. P2 P1 T2 T1 Quiz on Week 6 Materials (Cont’d) P-v diagram T-v diagram ES 202 Fluid & Thermal Systems

  9. Real Gas Versus Ideal Gas • Recall ideal gas as a simplified (yet powerful) model for real gas behavior • Its original derivation assumes negligible mutual interaction between gas molecules. Hence, it is expected to work well for gases under low pressure. • But, the next logical question will be: “How low is low?” or “Against what standard is low pressure measured with respect to?” • To answer this question, we need to recall the phase diagrams of a general substance. ES 202 Fluid & Thermal Systems

  10. Critical Point Comp. liquid Liquid Critical Point Superheated vapor Melting Solid Vaporization Saturated vapor line Saturated liquid line Two-phase dome Vapor Sublimation reduced temperature: reduced pressure: Critical State and Reduced Coordinate • Recall the phase diagrams of a general substance: • Base on the thermodynamic properties associated with the critical point, a non-dimensional reduced coordinate (a p group) can be defined for each substance: , ES 202 Fluid & Thermal Systems

  11. Compressibility Factor: Ideal Gas: Compressibility Chart Ideal Gas • Good for: • low pressure • high temperature critical point (Taken from Figure 3-56 in Cengel & Turner) ES 202 Fluid & Thermal Systems

  12. Revisit Ideal Gas Specific Heats • In general, • For an ideal gas, the specific internal energy(u) , hence, specific enthalpy(h) are functions of temperatureonly. • For an ideal gas, the change in specific internal energy and specific enthalpy can be simplified as: Definition of cv Definition of cp , ES 202 Fluid & Thermal Systems

  13. Entropy Variation in Ideal Gas • Introduce the Gibbs equation for a general substance: • Interpretation: • for a simple compressible system, • For an ideal gas, the Gibbs equation reduces to a simpler form. or ES 202 Fluid & Thermal Systems

  14. } geometrical interpretation Variation in Specific Heats • In general, the specific heats (cv, cp) are NOT true constants. They vary (increase) slightly with temperature even for ideal gases. • Afterall, it is the change in properties that matters (their absolute values depend on the chosen reference state.) • For an ideal gas with finite temperature change: • Different ways to approximate the integrals: • direct integration (cv and cp as functions of T) • divide and conquer • “average” specific heats , or ES 202 Fluid & Thermal Systems

More Related