1 / 14

Jim Magee President, Facility Commissioning Group

Building Envelope Commissioning Diagnostic Techniques. Jim Magee President, Facility Commissioning Group. 158 Burt Road Lexington, Kentucky 40503 859-278-5552 859-278-6501 Fax 859-221-5838 Mobile jim@facomgrp.com. Overview of References.

jett
Télécharger la présentation

Jim Magee President, Facility Commissioning Group

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Building Envelope Commissioning Diagnostic Techniques Jim Magee President, Facility Commissioning Group 158 Burt Road Lexington, Kentucky 40503 859-278-5552 859-278-6501 Fax 859-221-5838 Mobile jim@facomgrp.com Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  2. Overview of References Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  3. National Institute of Building Sciences Guideline 3 • Exterior Enclosure Technical Requirements for the Commissioning Process • For use with: ASHRAE Guideline 0 – 2005 • The Commissioning Process • Quality-oriented process for achieving, verifying, and documenting performance • Describes technical requirements for bldg. Cx Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  4. National Institute of Building Sciences Guideline 3 Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  5. National Institute of Standards and Technology • NISTIR 4821: Envelope Design Guidelines for Federal Office Buildings: Thermal Integrity and Airtightness • NISTIR 7238: Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  6. NISTIR 4821 & NISTIR 7238 Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  7. American Society for Testing and Materials • ASTM E779: Standard Test Method for Determining Air Leakage Rate by Fan Pressurization • ASTM 1827: Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  8. ASTM E779 & ASTM E1827 Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  9. American Society for Testing and Materials • ASTM C1060: Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings • Infrared imaging systems used for qualitative inspection of building walls, ceilings, roofs and floors Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  10. International Organization for Standardization • ISO 6781: Thermal insulation-Qualitative detection of thermal irregularities in building envelopes-Infrared method • Qualitative method for thermographic examination to determine irregularities in building envelopes Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  11. ASTM C1060 & ISO 6781 Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  12. American Architectural Manufacturers Association • AMMA 501.2-03: Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems • Type B-25, #6.030 brass nozzle with a 1/2" FPT as manufactured by Monarch Manufacturing Works, Inc./Newton Tool & Mfg. Company Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  13. AMMA 501.2-03 Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

  14. Questions Southeast Region Chapter 2011 Fall Meeting Birmingham, Alabama Thursday, September 29, 2011

More Related