1 / 13

Lesson 18 - Decay Heat

Learn about decay heat in a reactor core, including its definition, calculation methods, and two categories of heat removal. Understand the significance of decay heat and its potential impact on the reactor core. Explore different methods used to remove decay heat from the core, ensuring safe operation.

jnalley
Télécharger la présentation

Lesson 18 - Decay Heat

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lesson 18 - Decay Heat • DEFINE the term decay heat. • Given the operating conditions of a reactor core and the necessary formulas, CALCULATE the core decay heat generation. • DESCRIBE two categories of methods for removing decay heat from a reactor core.

  2. Decay Heat • The release of energy by the decay of fission products • Caused when highly radioactive fission products radioactively decay at a rate determined by the amount and type of radioactive nuclides present • Radioactive materials that remain in the reactor at the time it is shut down and the fission process halted will continue to decay and release energy. • Amount of decay heat is very significant – amount present in reactor immediately following shutdown will be roughly 7% of the power level that the reactor operated at prior to shutdown. • Reactor design must provide some means of removal of this decay heat from the core.

  3. Calculation of Decay Heat • Exact solution • Detailed process takes into account the fact that there are hundreds of different radionuclides present in the core, each with its own concentration and decay half-life • Dependent upon power history. • Must calculate the amount of fission products present at the time of shutdown. • Approximate solution - Uses single half-life that represents the overall decay of the core over a certain period of time.

  4. Calculation of Decay Heat

  5. Decay Heat Limits • Major concern - can cause melting of and/or damage to the reactor core (Three Mile Island) • Concern will vary according to reactor type and design. • Low power, pool-type reactors. – Low concern • Limits during shutdown • Based upon decay heat considerations. • Vary because of • Steam generator pressure, • Core temperature, • Any other parameter that may be related to decay heat generation. • For each limit developed, there is usually some safety device or protective feature established.

  6. Decay Heat Removal • Two general categories • Methods which circulate fluid through the reactor core in a closed loop • Methods which operate in an open system • Normally removed by the same methods used to remove heat generated by fission during reactor operation • Emergency cooling system of some sort will be included in the reactor design

  7. HVAC Principles • Purpose • Basic Equipment • Principles of Operation • Main Structural Components • Failure Mechanisms and Symptoms

  8. Purpose of HVAC Systems

  9. HVAC – Basic Equipment • Chiller units • Heating units • Fans • Blowers • Filters • Ductwork • Blowout ducts

  10. HVAC Principles of Operation Basic Refrigeration Cycle

  11. HVAC Components • Chiller Units • Circulation Pumps, both condenser and evaporator • Air Handling Units • Cooling Towers • Expansion Tank/Air Release Systems • Chemical Treatment Systems

  12. HVAC Failure Mechanisms and Symptoms • Loss of environmental control • Loss of coolant charge • High- and low-pressure cutoffs • Gas binding of cooling system

More Related