1 / 27

Geosynthetics for Filtration: Functions, Applications, and Selection

This document provides an overview of the functions, applications, and selection of geosynthetics for filtration. It covers topics such as filter behavior, filter-base soil interaction, mechanisms of filtration, filter selection criteria, and construction requirements. The information is based on reviewed research and is intended to represent the current state of practice.

joelbraden
Télécharger la présentation

Geosynthetics for Filtration: Functions, Applications, and Selection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. No. 4 of 19 Geosynthetics for Filtration by Jean Lafleur Dept. of Civil, Geological and Mining Engineering Ecole Polytechnique de Montréal The information presented in this document has been reviewed by the Education Committee of the International Geosynthetics Society and is believed to fairly represent the current state of practice. However, the International Geosynthetics Society does not accept any liability arising in any way from use of the information presented.

  2. Functions of a Filter • Retain particles of the base soil to be filtered • Avoid piping • Allow free flow of water • upstream of the filter Avoid external clogging (With unstable soils) • through the filter • Avoid internal clogging • Survive construction and environmental stresses • Function can be provided by either natural aggregates or by Geotxtiles

  3. Geotextile = Catalyst • Promotes equilibrium of particles after limited washout of finer particles by inducing a self- filtration zone (bridging) at the interface • (Lafleur et al., 1989)

  4. Filtration Behaviour • Clogging: the voids of a medium are progressively filled by solid matter to the point that the passage of water is compromised • Decrease in hydraulic conductivity • Internal clogging • By mineral particles • By precipitation and chemical deposition in the voids by water containing iron, de-icing salts • By biological growth encrustation in aerobic conditions

  5. Base - Filter Interaction

  6. Filter Applications • Wrapping of trench drains (Koerner, 1998)

  7. Filter Applications • Wall drains

  8. Filter Applications • Erosion protection (Pilarczyk, 2000)

  9. Filter Applications • Earth and rockfill dams (Lafleur & Paré, 1991)

  10. Filter Applications • Vertical consolidation drains • (Van Santvoort, 1994)

  11. Filter Applications • Silt fences (Holtz, et al., 1997)

  12. Filtration Flow Conditions • Dynamic vs static

  13. Laboratory Filter Characterization • Opening size O90by wet sieving

  14. Filter Characterization • Constriction size vs filtration opening size

  15. Filtration Behaviour • Theoretical opening size of the filter given fibre diameter dfof non woven geotextile • (Giroud, 1996)

  16. Filter – Base Soil Interaction • (Lafleur, 1999) • Mechanisms and parameters RR = Retention Ratio RR = Opening Size of the Filter (Of) Indicative Size of the Base (di)

  17. Gradation Curve of Base di = indicative size of the base

  18. Mechanisms • Piping: extensive washout of base particles leads to clogging of drainage system downstream by washed out particles

  19. Mechanisms • Bridging : equilibrium is attained after limited • amount of washout

  20. Mechanisms • Blinding or external clogging with suffosive soils: migrated particles in the basesoil form a cake at the filter interface

  21. Mechanisms • Evaluation of internal stability • (Kenney & Lau, 1985, 1986)

  22. Filter Selection • By index tests on base soils • (Lafleur, 1999)

  23. Filter Selection • By performance test (Fannin, et al., 1994) Gradient Ratio GR = (h2 – h1) / 25 (h3 – h2) / 50 Mass of Piped Particles Mp = Mass Sample Area

  24. Filter Selection • Performance test • Gradient Ratio • GR < 1 • Mass of Piped Particles • Mp < 2500 g/m2

  25. Construction Requirements • Intimate contact with protected soil • Minimum overlap : 300 mm or seamed joints • Avoid punching by construction equipment, • Angular stones • For silt fences : • spacing is function of geotextile tensile strength • Posts have a minimum height of 1 m plus burial depth • Posts placed a minimum of 500 mm into the ground (increased to 600 mm on a 3h:1v slope or steeper) • Cautions with slopes greater than 1:1

  26. List Of References • FANNIN, R.J., VAID, Y.P. & SHI, Y.C. (1994) Filtration behaviour of nonwoven geotextiles. Canadian Geotechnical Journal. Vol. 31, No. 4, pp. 555-563. • GIROUD, J.P. (1996). Granular filters and geotextile filters. Proceedings GEOFILTERS'96 Conference, Montréal, Canada, edited by Lafleur & Rollin. pp. 565-680. • HOLTZ, R.D., CHRISTOPHER, B.R. & BERG, R.R. (1997). Geosynthetic Engineering. BiTech Publishers Ltd. 452 p. • KENNEY, T.C. & LAU, D. (1985) "Internal stability of granular filters”. Canadian Geotechnical Journal, Vol. 22, No. 2, pp. 215‑225. • KENNEY, T.C. & LAU, D. (1986) “ Internal stability of granular filters : Reply ”. Canadian Geotechnical Journal, Vol. 23, pp. 420-423. • KOERNER, R.M. (1998) "Designing with geosynthetics" 4th Edition Prentice‑Hall, 761 p. • LAFLEUR, J. (1999). Selection of geotextiles to filter broadly graded cohesionless soils. Geotextiles and Geomembranes. Vol. 17, Nos. 5 & 6, pp. 299-312. • LAFLEUR J., MLYNAREK J. & ROLLIN A.L. (1989). Filtration of Broadly Graded Cohesionless Soils. Journal of Geotechnical Engineering, ASCE, Vol.115, No.12, pp.1747‑1768. • LAFLEUR, J. & PARE, J.J. (1991). Use of geotextiles in the James Bay hydro-electric project. Geotextiles and Geomembranes. Vol. 10 No. 1, pp. 35-53. • PILARCZYK, K.W. (2000). Geosynthetics and Geosystems in Hydraulic and Coastal Engineering. Balkema, 913 p. • Van SANTVOORT G.P.T.M. (1994). Geotextiles and geomembranes in civil engineering. Balkema, 595 p.

More Related