1 / 27

Bloodstains

Bloodstains. A field of forensic investigation that deals with: physical properties of blood patterns produced by forces being applied to blood Blood, as a fluid, follows the laws of physics . A blood droplet will remain spherical until it collides with a surface.

johnstonsteven
Télécharger la présentation

Bloodstains

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bloodstains • A field of forensic investigation that deals with: • physical properties of blood • patterns produced by forces being applied to blood • Blood, as a fluid, follows the laws of physics. • A blood droplet will remain spherical until it collides with a surface

  2. What can bloodstains tell us? • The distance between the target surface and the origin of blood. • The point of origin of the blood. • Movement of a person or an object. • The number of blows, etc. causing the bloodshed and/or the dispersal of blood. • Type and direction of impact that produced the bloodshed. • The position of the victim and/or object during bloodshed. • Movement of the victim and/or object after bloodshed.

  3. Let’s take a closer look……

  4. Conditions Affecting Shape of Blood Droplet • Size of the droplet • Angle of impact • Velocity • Height • Texture of the target surface • On clean glass or plastic—droplet will have smooth outside edges: • On a rough surface—will produce scalloping on the edges:

  5. Shape of a Blood Drop • Round—if it falls straight down at a 90 degree angle. • Elliptical—blood droplets elongate as the angle decreases from 90 to 0 degrees.

  6. Bloodstains Exist in 3 forms: Passive; Impact; Transfer • Passive: when natural gravitational forces act on blood. • Can be in the form of: flows, pools, or drips. Ex.Nosebleed

  7. Bloodstains Cont. • Impact: when external forces, other than gravity, act on blood. • Can be in the form of: arterial spurts, castoff, and spatter. • Arterial Spurts • Also known as gushing • Blood exiting the body under pressure from a breached artery

  8. Arterial spurt

  9. Bloodstains Cont. Impact: Castoff • Castoff • Created when a volume of blood is flung from an object. Ex. A bloody object (like a hammer) being swung or coming to a sudden stop. • Stain starts out circular but becomes more elliptical at the end.

  10. Cast Off

  11. Bloodstains Cont. • Backspatter • Blood is acted upon by an outside force and broken into smaller stains. Low Velocity: Size is 4-6 mm in diameter • Occurs with a blunt object impact Medium Velocity: Size is 1-4 mm in diameter. • Generally seen in a beating or stabbing High Velocity: Size is < 1mm in diameter. Produces atomized mist (like hairspray). • Typical of gunshot wound

  12. Impact: Spatter (med velocity)

  13. Impact: Spatter (high velocity)

  14. Bloodstains Cont. • Transfer: when an object comes into contact with blood and transfers a patterned image in that blood onto another surface. Can be in the form of: • Contact • Bloody object comes in contact with a clean surface. • Wipes • Blood is on a surface (and beginning to dry) and is wiped or smeared. • Swipes • Blood is transferred from a moving source onto an unstained surface

  15. Transfer: Contact

  16. Transfer: Wipe

  17. Transfer: Swipe

  18. Bloodstain Pattern Analysis Measuring the Angle of Impact: • The more acute the angle of impact, the more elongated the stain and the easier it is to determine the direction of travel. • 90 degree angles are perfectly round drops • Acute degree angles (Ex. 30 degrees) have an elliptical shape and will begin to produce a tail/spine.

  19. 900 angle 300 angle Tail/Spine

  20. Stain tails point in the direction that the blood drop was traveling.

  21. W L Determining Angle of Impact • Identify the bloodstains you will use. • Measure the width and length of each stain. • Apply the following formula: width = sine of angle impact length inverse sine (arcsine) = Angle of Impact (in degrees)

  22. W L Determining Angle of Impact • The greater the difference between the width and length, the sharper the angle of impact. Ex. Imagine a bloodstain 2 mm wide and 4 mm long. • The width divided by the length is 0.5 • The arcsine of 0.5 is 30 • So the blood hit the surface at a 300 angle.

  23. Based on trig functions of right triangle • Angle of Impact will always be 90o or less. Determining Angle of Impact SIN = Opposite / Hypotenuse COS = Adjacent / Hypotenuse TAN = Opposite / Adjacent

  24. Area of Convergence • The area of convergence is the point of origin - the spot where the “blow” occurred. • The location of the blood source can be determined by drawing lines from the various blood droplets to the area where they intersect. ** Area of Convergence will NEVER come together at a single point.

  25. Point of Origin Determining Point of Origin Distance Area of Convergence Impact Site Tan of Angle of Impact x Distance to Convergence = Distance From Surface

  26. Blood Droplet Characteristics • A blood droplet will remain spherical in space until it collides with a surface. • Once a blood droplet impacts a surface, a bloodstain is formed. • How will the shape change as the height is increased or decreased?

More Related