1 / 22

Regd Off.: 57/3, 2 nd Floor, Hunters Road, Vepery, Nr. C.S.I. Saint Pauls Church, Chennai

Regd Off.: 57/3, 2 nd Floor, Hunters Road, Vepery, Nr. C.S.I. Saint Pauls Church, Chennai (O): +91 44 2640 1880 | (M): +91 89395 33582 | (e): info@shantimetaltechnology.com. www.shantimetaltechnology.com. By Shanti Metal Technology. Weight Optimization of Pull Handle. Objectives.

joseph-moran
Télécharger la présentation

Regd Off.: 57/3, 2 nd Floor, Hunters Road, Vepery, Nr. C.S.I. Saint Pauls Church, Chennai

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Regd Off.: 57/3, 2nd Floor, Hunters Road, Vepery, Nr. C.S.I. Saint Pauls Church, Chennai (O): +91 44 2640 1880 | (M): +91 89395 33582 | (e): info@shantimetaltechnology.com www.shantimetaltechnology.com

  2. By Shanti Metal Technology Weight Optimization of Pull Handle

  3. Objectives • To optimize weight of the pull handle and verify the maximum deformation and stress occurred in design model.

  4. Actual Model CAD Model at Initial. Pull Handle made by Brass material and having 286 gms weight.

  5. Meshed Model of Initial Design Type of Elements: 3D Tetra with 10- noded Total no of elements: 67526 Total no of nodes: 118375

  6. Applied Loading Conditions for Initial Design • 3 Kg of load is applied represented with blue color. • Translation and Rotation in X,Y & Z directions were fixed represented in red color. • Translation in Y direction was fixed represented in pink color.

  7. Deformation plot for Initial Design Maximum Deformation of 0.0354 mm occurred.

  8. Stress plot for Initial Design Maximum Stress of 8.895 MPa Occurred

  9. Proposed Optimized Design-1 • Reduced the width of the Door Leg • Moved the hole and removed material near holes and backside of handle • Optimized mass 196 gms.

  10. Deformation plot for Proposed Design-1 Maximum Deformation of 0.0706 mm occurred.

  11. Stress plot for Proposed Design-1 Maximum Stress of 30.10 MPa Occurred

  12. Proposed Optimized Design-2 • Reduced the width of the Door Leg • Moved the hole and removed material near holes and backside of handle. • Removed the materials at the center as shown in above picture • Optimized mass 176 gms.

  13. Deformation plot for Proposed Design-2 Maximum Deformation of 0.0791 mm occurred.

  14. Stress plot for Proposed Design-2 Maximum Stress of 19.42 MPa Occurred

  15. Proposed Optimized Design-3 • Reduced the width of the Door Leg • Moved the hole and removed material near holes and backside of handle. • Removed the materials at the center as shown in above picture • Optimized mass 162 gms.

  16. Deformation plot for Proposed Design-2 Maximum Deformation of 0.0776 mm occurred.

  17. Stress plot for Proposed Design-3 Maximum Stress of 20.75 MPa Occurred

  18. Proposed Optimized Design-4 • Reduced the width of the Door Leg • Moved the hole and removed material near holes and backside of handle. • Removed the materials at the center as shown in above picture • Optimized mass 158 gms.

  19. Proposed Optimized Design-4 Maximum Deformation of 0.0828 mm occurred.

  20. Stress plot for Proposed Design-4 Maximum Stress of 19.27 MPa Occurred

  21. Summary

  22. Mr. JayeshHirpara Thank You

More Related