350 likes | 620 Vues
The Idaho Legislative Process. How a Bill Becomes A Law Idaho Council on Developmental DisABILITIES. As Introduced. As Amended in Committee. As Amended on Second Reading. As Enacted.
E N D
The Idaho Legislative Process How a Bill Becomes A Law Idaho Council on Developmental DisABILITIES
Someone has a great idea They contact their Senator or Representative The Process
Legislation is drafted (first step is Routing Slip or RS) The Senator or Representative will introduce the RS in Committee
A State Agency identifies a need The Agency drafts legislation ~ OR ~
The Agency will work with a Senator or Representative to introduce the RS in Committee
Vote to print the legislation: it will be sent to Legislative Services to review and be given a bill number Vote not to print the legislation: Try again, later in the session or next year The Committee will:
Once a bill is printed • After being printed and receiving a bill number (H### in the House and S### in the Senate), the bill goes to the First Reading Calendar on the Floor of the chamber • On First Reading, the bill is introduced and assigned to a committee
Committee hearing and action Table or Hold the bill in Committee for further discussion or testimony OR Vote not to support the bill; this means the bill is dead for the session OR Vote to send the bill to the floor either with a recommendation to pass or no recommendation OR Vote to send the bill to the Amending Order to change the bill on the floor The committee will put the bill on the agenda for consideration during a meeting. They will take public comment at that time. After hearing about the bill and its impact, they will do one of 4 things:
The bill goes to the floor and 1.The bill appears on the Second Reading Calendar 2.On Third Reading, the bill’s sponsor will rise to explain the bill and open debate. The Senators or Representatives will debate the good and bad points of the bill until the Lieutenant Governor (in the Senate) or the Speaker of the House (in the House of Representatives) asks the sponsor to close debate; and then . . .
The Vote • If a majority of the House or Senate vote “yes”, then the Bill will move to the opposite “side of the rotunda” to the House or the Senate. • If a majority of the members vote “no”, then the bill is dead.
On First Reading, the bill is introduced and assigned to a committee The bill will be sent to a committee; the Chairperson will decide if/when the bill will be considered by the committee. The sponsor from the other side will work with the Committee Chairperson to identify a committee member to “carry” the bill in this committee. The bill is introduced in the other chamber
Just like the first Committee, this Committee will Table or Hold the bill in Committee for further discussion or testimony OR Vote not to support the bill; this means the bill is dead for the session OR Vote to send the bill to the floor either with a recommendation to pass or no recommendation OR Vote to send the bill to the Amending Order to change the bill on the floor put the bill on the agenda for consideration during a meeting. They will take public comment at that time. After hearing about the bill and its impact, they will do one of 4 things:
Once again, the bill goes to the floor and 1.The bill appears on the Second Reading Calendar 2.On Third Reading, the bill’s sponsor will rise to explain the bill and open debate. The Senators or Representatives will debate the good and bad points of the bill until the Lieutenant Governor (in the Senate) or the Speaker of the House (in the House of Representatives) asks the sponsor to close debate; and then . . .
The Next Vote If a majority of the House or Senate vote “yes”, then the Bill will move to the Governor’s desk If a majority of the members vote “no”, then the bill is dead.
Some things worth mentioning • If a bill is amended in the second chamber, it must go back to the original chamber for approval of the amendments • Concurrent and Joint Resolutions and Memorials are handled somewhat differently from bills: for example, a Concurrent Resolution creating a legislative study committee, after passing both chambers, is held by leadership until the end of the session and then the leaders decide which study committees will be authorized
The Joint Finance – Appropriations Committee develops and approves all budget bills; no public testimony is allowed during this process, although the Committee sometimes seeks input from the germane committee chairs or other experts.
The Governor can: • Sign the bill into law • Veto the bill, killing it for the year • Not sign the bill, but allow it to become law without his signature
After the Bill is signed, • The appropriate agency will draft rules and regulations implementing the law; these can be just as important as the law itself, and the legislature must approve them at the next session
Some interesting “factoids” • There are 105 legislators in Idaho – 35 in the Senate and 70 in the House; this means that every Idahoan has 3 people representing them in the legislature • All Idaho legislators serve 2-year terms • Until 1969, the legislature met every other year; now it meets every year starting on the Monday on or closest to January 9 • The longest legislative session was 118 days in 2003; the shortest sessions were 68 days in 1995, 1996, 1999, and 2002. • In the 2008 session, 635 bills were introduced and 413 (65%) passed; most bills were introduced in 1994 (860) and the most bills that were passed was in 2000 (487).
More interesting “factoids” • The Lieutenant Governor presides over the Senate and the Speaker of the House presides over the House of Representatives • In the Senate, votes are taken by roll call; in the House, members vote electronically by pushing a button at their desk • Currently there are 14 House committees and 10 Senate committees; all meetings are open to the public • Idaho is one of 17 states that has a “citizen legislature”: part-time, low salaries, few staff and lawmakers have other jobs • In 1890, legislators were paid $5/day; now they are paid $15,646/year plus $1,700 in office expenses for the session
Tracking Legislation Now you know the process, but how can you track a bill? • On line – • Go to www.legislature.idaho.gov • Select the Legislation link • Select the Mini-Data Bill Status information link, then choose the bill number you want, OR • Select Legislative Topic Index to bills which groups bills by topic in alphabetical order and choose the bill number you want
Tracking Legislation • On line cont’d • When you click on the bill number, it will give you an outline of what has happened with the bill since introduction – For example: 01/31 House intro - 1st rdg - to printing 02/01 Rpt prt - to Jud (this means the Judiciary Committee) 02/14 Rpt out - rec d/p - to 2nd rdg 02/15 2nd rdg - to 3rd rdg 02/19 3rd rdg - PASSED - 69-0-1 Then it will list the names of all who voted for or against the bill It will also tell you the same information for the other chamber It will NOT give you information about what happened to the bill in a committee except if it received a recommendation to pass
Tracking Legislation • On-line cont’d • After listing what has happened with the bill, it will provide • the full text of the bill • the Statement of Purpose (SOP) – a plain language version of what the bill does • the fiscal impact – what the bill will cost the state • legislative sponsors or other contacts, with phone numbers
Tracking Legislation You can also track legislation by: • Attending legislative committee meetings • Checking the websites of other organizations or agencies • Networking with others who share your concerns • Reading the newspaper, watching TV • Getting legislative alerts from organizations
Some helpful websites Idaho Legislature Home Page: http://www.legislature.idaho.gov State of Idaho Home Page: http://www.idaho.gov Council on Developmental Disabilities Home Page: http://www.icdd.idaho.gov State Independent Living Council Home Page: http://www.silc.idaho.gov