1 / 12

Part 3: Distillation of Grain Spirit

Part 3: Distillation of Grain Spirit. Continuous Distillation. Maturation. Blending and Packaging. Distillation of Grain Spirit . Grain spirit derived from a mash containing ~90% unmalted cereal Produced using continuous distillation (Coffey still in Scotland)

jun
Télécharger la présentation

Part 3: Distillation of Grain Spirit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Part 3: Distillation of Grain Spirit Continuous Distillation Maturation Blending and Packaging

  2. Distillation of Grain Spirit • Grain spirit derived from a mash containing ~90% unmalted cereal • Produced using continuous distillation (Coffey still in Scotland) • Relatively few, but large distilleries, producing as much as 60 million litres of alcohol per annum • Highly rectified spirit (~94% abv); matured and used as a base for blending with malt whiskies • Also provides feedstock for production of neutral spirit

  3. A Model Continuous Distillation Column

  4. Operation of a Continuous Distillation Column • Steam sparging at the base of the column provides heat • Liquid flows across feed plate into the distillation column • Downcomer pipes permit the liquid to flow down through a series of sieve plates • Holes in the sieve plates permit vapours to pass upwards through the column • The stripping section below the feed plate separates the more volatile from the less volatile components • The rectifying section above the sieve plates concentrates the more volatile components

  5. Internal Design of a Continuous Distillation Column

  6. Column Design: the Sieve Plates • Sieve plates are designed so that a low level of liquid (up to 5 cm) collects on the plate area • Holes must be sufficiently small so that upward vapour velocity can prevent weepage, but sufficiently large to prevent blockage • Weirs surrounding the downcomers prevent vapours from flowing up the downcomers, and allow the level of liquid on the plate to be controlled • Vapour velocity must be sufficiently slow to allow adequate mixing of the upcoming vapour and the liquid on the plate

  7. The Coffey Still

  8. Operation of the Coffey Still • Wash is pre-heated through a rectifying column (30-35 plates); this also increases internal reflux of the column • Pre-heated wash is then fed into the top of a stripping column (the analyzer) • Vapours (30 to 40% abv) from the top of the analyzer are fed into the base of the rectifying column • Reflux occurs from the base of the rectifying column to the top of the analyzer • Product (~94% v/v ethanol) is drawn 5-10 plates from the top of the rectifying column

  9. Changes in Vapour Composition in a Coffey Still

  10. Composition of New-Make Grain and Malt Spirit(after dilution for cask filling)

  11. The Barbet Still • Widely used in the production of neutral and light spirits in Europe and South America • Uses a heads removal section above the stripping column to remove some of the more volatile components before they reach the rectifying column • The heads removal section prevents CO2 build-up in the rectifier and provides better control of some congener levels in the rectifying column • Disadvantage of the Barbet system is that alcohol losses are higher (compared to Coffey still)

  12. The Barbet Still

More Related