1 / 21

THE NEXT 6 SLIDES ARE EXAMPLES OF ROADBEDS FOR EACH TYPE OF TRUSS BRIDGE

THE NEXT 6 SLIDES ARE EXAMPLES OF ROADBEDS FOR EACH TYPE OF TRUSS BRIDGE. UNDERNEATH DECK TRUSS. THROUGH TRUSS. TRIANGULAR TRUSS. K TRUSS. WARREN TRUSS WITH VERTICAL SUPPORTS. BALTIMORE TRUSS. GET THE ROADBED WORKSHEET. DO NOT COVER THE HOLE IN THE TEST BLOCK!.

junior
Télécharger la présentation

THE NEXT 6 SLIDES ARE EXAMPLES OF ROADBEDS FOR EACH TYPE OF TRUSS BRIDGE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. THE NEXT 6 SLIDES ARE EXAMPLES OF ROADBEDS FOR EACH TYPE OF TRUSS BRIDGE

  2. UNDERNEATH DECK TRUSS

  3. THROUGH TRUSS

  4. TRIANGULAR TRUSS

  5. K TRUSS

  6. WARREN TRUSS WITH VERTICAL SUPPORTS

  7. BALTIMORE TRUSS

  8. GET THE ROADBED WORKSHEET DO NOT COVER THE HOLE IN THE TEST BLOCK!

  9. TAPE THE ROADBED WORKSHEET TO THE FOAM BOARD AT THE 4 CORNERS.NO WAX PAPER IS NEEDED!YOU WILL NEED A DIME SIZE DOT OF GLUE ON A PIECE OF SMALL SCRAP PAPER.

  10. STAND UP THE 2 TRUSSES ON THE 2 SOLID BLACK LINES AND TAPE THE TRUSS TO THE PAPER. PLACE THE TAPE ON THE OUTSIDE OF THE TRUSS. ROADBED PIECES WILL BE PLACE WHERE THE TEST BLOCK IS LOCATED.NOTE:TRUSS NEEDS TO STAND VERTICALLY

  11. THE 2 TRUSSES STANDING VERTICALLY IS IMPORTANT FOR THE TEST BLOCK TO FIT THROUGH THE OPENING.

  12. THE TOP OF THE TRUSS SHOULD MEASURE 2 ½ INCHES

  13. TEST BLOCK MUST FIT BETWEEN THE 2 TRUSSES

  14. PLACE THE ROADBED BALSA WOOD PIECES WHERE THE TEST BLOCK IS LOCATED. DON’T ADD MANY PIECES TOWARDS THE END OF THE TRUSSES WHERE THE TEST BLOCK IS NOT LOCATED.IMPORTANT - LAY BALSA WOOD ON TOP OF BOTH TRUSSES.CAUTION: NOT IN BETWEEN THE 2 TRUSSES

  15. CUT THE BALSA WOOD USING THE BALSA CUTTER & GLUE THE PIECE IN PLACE.

  16. USE THE REMAINING BALSA WOOD TO FORM A ROADBED.NOTICE - THE ROADBED PIECES ARE LOCATED OVER THE TEST BLOCK. DO NOT COVER THE HOLE ON THE TEST BLOCK.

  17. YOU MAY LAY PIECES ON TOP OF EACH OTHER (2 PIECES MAX.)

  18. YOU MAY USE DIAGONALS

  19. EXAMPLE OF THE TEST BLOCK RESTING ON THE ROADBED

  20. SIDE VIEW OF TEST BLOCK RESTING ON THE ROAD BED

  21. STORING YOUR BRIDGEGIVE IT TO YOUR INSTRUCTORDO NOT REMOVE YOUR BRIDGE FROM THE FOAM BOARD UNTIL THE NEXT CLASS. GLUE MUST DRY.

More Related