1 / 6

AN INTRODUCTION TO:

TECHNICAL. GUIDELINES. from the leading resource for education and information in the repair industry. ICRI Technical Guideline No. 310.2-1997. AN INTRODUCTION TO:. Surface Preparation. Selecting ad Specifying Concrete Surface Preparation for Sealers, Coatings and Polymer Overlays.

kamil
Télécharger la présentation

AN INTRODUCTION TO:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TECHNICAL GUIDELINES from the leading resource for education and information in the repair industry... ICRI Technical Guideline No. 310.2-1997 AN INTRODUCTION TO: Surface Preparation Selecting ad Specifying Concrete Surface Preparation for Sealers, Coatings and Polymer Overlays Formerly 03732

  2. Provides designers, specifiers, contractors and manufactures with the tools they need to select and specify methods for preparing concrete surfaces prior to the application of sealers, coatings and polymer overlay systems. ICRI Guideline 310.2-1997 Surface Preparation Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings and Polymer Overlays Purpose of This Guideline

  3. Designers • Provides a method to determine project objectives and requirements • Specifiers • Provides selector chart of methods to achieve each coating type • Provides replicas of typical surfaces for on-site standards • Contractors • Provides information on the results of various methods of preparation • Provides on-site visual to verify surface preparation has been completed • Manufacturers • Provides a visual standard for desired surface preparation for a particular product. ICRI Guideline 310.2-1997 Surface Preparation Sealers, Coatings & Polymer Overlays Who is this guideline for?

  4. A workbook designed to organize and prioritize information needed for good selection decisions. • A chart which identifies methods capable of production the profile typically recommended for each coating type. • Presents capabilities, limitations, operating requirements, environmental factors, and safety consideration for each method of surface preparation. • Surface Profile Chips – Replicas of typical surfaces produced by one or more of the methods providing a visual standard for purposes of specification, execution and verification. ICRI Guideline 310.2-1997 Surface Preparation Sealers, Coatings & Polymer Overlays What is covered?

  5. Specifiers and manufactures can specify an exact surface desired for a particular repair and a method to confirm it has been achieved. • Provides designers with a selection method which provides optimum balance of performance, risk and cost factors. • Information for all the available methods provided in one location. ICRI Guideline 310.2-1997 Surface Preparation Sealers, Coatings & Polymer Overlays Benefits of Using This Guide…

  6. TECHNICAL GUIDELINES from the leading resource for education and information in the repair industry... ICRI Technical Guideline No. 310.2-1997 Find it at WWW.ICRI.ORG Surface Preparation Selecting ad Specifying Concrete Surface Preparation for Sealers, Coatings and Polymer Overlays Available in Hard Copy or as a PDF download Concrete Surface Profile Chips Sold Separately

More Related