1 / 45

Oxygen/ Acetylene Cutting & Safety

Oxygen/ Acetylene Cutting & Safety. By Keith Dover. Objectives for the Lesson. Students will be able to identify terms associated with oxygen/acetylene cutting. Students will be able to label and identify parts of a cutting torch. Students will be able to list 5 safety procedures.

kat
Télécharger la présentation

Oxygen/ Acetylene Cutting & Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Oxygen/ Acetylene Cutting & Safety By Keith Dover

  2. Objectives for the Lesson • Students will be able to identify terms associated with oxygen/acetylene cutting. • Students will be able to label and identify parts of a cutting torch. • Students will be able to list 5 safety procedures. • Students will be able to identify 5 personal protective equipment pieces.

  3. E-moment Take out a piece of paper and answer the following questions. You will have 3 minutes. • What do you know about oxygen-acetylene cutting and safety? • What do you think you know about oxygen-acetylene cutting and safety? • What don’t you know yet about oxygen-acetylene cutting and safety?

  4. Pre-Test • Turn to a partner and identify the following: A. B.

  5. C. D.E. F.

  6. G. H. I. J.

  7. K. L.

  8. Defintions • Oxygen- (non-flammable gas) Is not a fuel: it is what chemically combines with the fuel to the heat for cutting. This is called “oxidation”. It’s shipped in high pressure cylinders at pressures around 3000 lbf/in2 • Acetylene-(flammable gas) is the primary fuel for oxy-acetylene cutting. Acetylene is shipped in special cylinders designed to keep the gas dissolved. The cylinders are packed with porous material diatomaceous, then filled to 50% capacity with acetone.

  9. Oxygen/Acetylene CuttingSafety Tips • Keep an approved fire extinguisher of the proper size and type in the work area.  Inspect it regularly to ensure that it is in proper working order.  Know how to use the fire extinguisher. • Never cut on a container that has had toxic, combustible, or flammable liquids in it. • Never perform cutting operations in an area containing combustible vapors, flammable liquids, or explosive dust. • Keep cutting apparatus clean and free from all grease, oil, and other flammable substances. • Always keep work area well ventilated.

  10. Oxygen/Acetylene cutting torches can be used to cut, pierce and gouge mild steel.

  11. Oxygen/Acetylene Cutting Guidelines

  12. Oxygen/Acetylene Cutting • Oxygen/Acetylene cutting operations use fire or combustion as a basic tool.  The process is very useful when properly controlled. • However, it can be extremely destructive if not performed correctly in the proper environment.

  13. Oxygen/Fuel Cutting • Gas flames produce infrared radiation which may have a harmful effect on the skin and especially on the eyes. 

  14. Oxygen/Acetylene Cutting Personal Protective Equipment (PPE)! • Select goggles or a mask with tempered lenses shaded 5 or darker to protect your eyes from injury and provide good visibility of the work. • Wear flame resistant clothing, protective gloves, sleeves, aprons and safety shoes to protect skin and clothing from sparks and slag.  • Keep collars, sleeves and pockets buttoned.  • DO NOT roll up sleeves or cuff pants.

  15. Oxygen/Acetylene Cutting • Good housekeeping practices improve the safety of any work area.  They are essential to the safety of welding and cutting operations due to the potential hazards involved.

  16. Oxygen/Acetylene Cutting Warning! • Never allow oxygen to contact grease, oil, or other flammable substances.  Although oxygen by itself will not burn, these substances become highly explosive.  • They can ignite and burn violently in the presence of oxygen.

  17. Oxygen/Acetylene Cutting • Ventilate welding and cutting work areas adequately.  • Maintain sufficient air flow to prevent accumulation of explosive or toxic concentrations of gases.  • Welding or cutting operations using certain combinations of metals, coatings, and gases generate toxic fumes.  Use respiratory protection equipment in these circumstances.

  18. Cutting Torch Parts

  19. Portable Oxygen/ Acetylene Cutting Rig

  20. Pressure Settings for Oxygen and Acetylene Regulators • Oxygen = 40 psi • Acetylene = 5-8 psi

  21. Acetylene Regulator

  22. Oxygen Regulator

  23. Oxygen/Acetylene Hose Green = Oxygen Red = Acetylene

  24. Cutting Torch

  25. Parts of a Cutting Torch

  26. Spark Lighter

  27. Cutting Tip

  28. Welding Tip

  29. Heating Tip

  30. Flashback Arrestors

  31. Reverse Flow Check Valves

  32. Cutting Torch Manufacturers

  33. Oxygen/Acetylene Cutting Torch Safety Hazards

  34. Working Pressure Gauge Failure

  35. Cracked Acetylene Hose

  36. Oxygen and Acetylene Cylinders Stored Improperly Under Stairwell

  37. Oxygen/ Acetylene Cutting Torch Stored on Unsafe Cart

  38. Oxygen/ Acetylene Cutting Torch Stored in Flammable Liquids Cabinet

  39. In Conclusion • This process can KILL you and others. Be sure to follow all safety rules. • Be sure to completely shut down the cutting torch when the job is completed. • Keep all oils and grease away from the regulators. When oxygen is compressed with a petrochemical, it becomes highly reactive and can explode. Imagine a 500lb bomb exploding in front of you. Will there be any pieces to pick up?

  40. Post-Test • Raise your hand if you think you know what these represent: • B. Portable cutting rig Gauges

  41. C. Acetylene D. Oxygen regulator regulatorE. F. HosesGreen= OxygenRed= Acetylene Spark Lighter

  42. Cutting Torch H. Cutting Tip I. Welding TipJ. Heating Tip

  43. Flashback L. Reverse FlowArrestors Check Valves

  44. Remember… Safety is Job # 1

More Related