1 / 54

Data and Computer Communications

Data and Computer Communications. Chapter 8 Multiplexing Techniques. Transmission Efficiency: Multiplexing. Several data sources share a common transmission medium, with each source having its own channel Line sharing saves transmission costs

kaylee
Télécharger la présentation

Data and Computer Communications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Data and Computer Communications Chapter 8 Multiplexing Techniques

  2. Transmission Efficiency: Multiplexing • Several data sources share a common transmission medium, with each source having its own channel • Line sharing saves transmission costs • Higher data rates mean more cost-effective transmission • Most individual data sources require relatively low data rates

  3. Transmission Efficiency: Data compression • Reduces the size of data files to move more information with fewer bits • Used for transmission and for storage • e.g. ZIP • Often combined with multiplexing to increase efficiency

  4. Alternate Approaches to Terminal Support • Direct point-to-point links • Multidrop line • Multiplexer • Integrated MUX function in host

  5. Direct Point-to-Point

  6. Multidrop Line

  7. Multiplexer

  8. Integrated MUX in Host

  9. MUX Why multiplexing • share the use of a common channel shared channel DEMUX Multiplexer Demultiplexer

  10. Multiplexing

  11. Types of Multiplexer • FDM (Frequency Division Multiplexer) • TDM (Time Division Multiplexer)

  12. Frequency Division Multiplexing • FDM • Useful bandwidth of medium exceeds required bandwidth of channel • Each signal is modulated to a different carrier frequency • Carrier frequencies separated so signals do not overlap (guard bands) • e.g. broadcast radio • Channel allocated even if there is no data

  13. Frequency Division Multiplexing • Requires analog signaling & transmission • Bandwidth = sum of inputs + guardbands • Modulates signals so that each occupies a different frequency band • Standard for radio broadcasting, analog telephone network, and television (broadcast, cable, & satellite)

  14. CH1 CH1 CH2 CH2 CH2 CH3 CH1 MUX f bandwidths multiplexed into one channel CH3 CH3 originalbandwidth bandwidthsraised in frequency Frequency Division Multiplex

  15. Frequency Division MultiplexingDiagram

  16. FDM System

  17. FDM of Three Voiceband Signals Only the lower sideband is used

  18. Analog Carrier Systems • AT&T (USA) • Hierarchy of FDM schemes • Group • 12 voice channels (4kHz each) = 48kHz • Range 60kHz to 108kHz • Supergroup • 60 channel • FDM of 5 group signals on carriers between 420kHz and 612 kHz • Mastergroup • 10 supergroups

  19. Synchronous Time Division Multiplexing • Data rate of medium exceeds data rate of digital signal to be transmitted • Multiple digital signals interleaved in time • Time slots pre-assigned to sources and fixed • Time slots allocated even if there is no data • Time slots do not have to be evenly distributed amongst sources

  20. Synchronous Time-Division Multiplexing (TDM) • Used in digital transmission • Requires data rate of the medium to exceed data rate of signals to be transmitted • Signals “take turns” over medium • Slices of data are organized into frames

  21. Synchronous TDM and PSTN • Used in the modern digital telephone system • US, Canada, Japan: DS-1 (T-1), DS-3 (T-3), ... • Europe, elsewhere: E-1, E3, … • These are listed in table 8.3 Page 249 • Data rate of 1.544Mbps • Uses PCM to digitize voice transmission at 8K samples/sec, frame length of 193bits (8000x193=1.544 Mbps=T1)

  22. A1 D1 timeslot 1 2 3 4 A2 D2 MUX A3 D3 data filled in time slot originalsignal digitizedsignal Time Division Multiplex

  23. Time Division Multiplexing

  24. TDM System

  25. TDM Link Control • No headers and trailers • Data link control protocols not needed • Flow control • Data rate of multiplexed line is fixed • If one channel receiver cannot receive data, the others must carry on • The corresponding source must be quenched • This leaves empty slots • Error control • Errors are detected and handled by individual channel systems

  26. Data Link Control on TDM

  27. Framing • No flag or SYNC characters bracketing TDM frames • Must provide synchronizing mechanism • Added digit framing • One control bit added to each TDM frame • Looks like another channel - “control channel” • Identifiable bit pattern used on control channel • e.g. alternating 01010101…unlikely on a data channel • Can compare incoming bit patterns on each channel with sync pattern

  28. Pulse Stuffing • Problem - Synchronizing data sources • Clocks in different sources drifting • Data rates from different sources not related by simple rational number • Solution - Pulse Stuffing • Outgoing data rate (excluding framing bits) higher than sum of incoming rates • Stuff extra dummy bits or pulses into each incoming signal until it matches local clock • Stuffed pulses inserted at fixed locations in frame and removed at demultiplexer

  29. TDM of Analog and Digital Sources

  30. Digital Carrier Systems • Hierarchy of TDM • USA/Canada/Japan use one system • ITU-T use a similar (but different) system • US system based on DS-1 format • Multiplexes 24 channels • Each frame has 8 bits per channel plus one framing bit • 193 bits per frame

  31. Digital Carrier Systems (2) • For voice each channel contains one word of digitized data (PCM, 8000 samples per sec) • Data rate 8000x193 = 1.544Mbps • Five out of six frames have 8 bit PCM samples • Sixth frame is 7 bit PCM word plus signaling bit • Signaling bits form stream for each channel containing control and routing info • Same format for digital data • 23 channels of data • 7 bits per frame plus indicator bit for data or systems control • 24th channel is sync

  32. Mixed Data • DS-1 can carry mixed voice and data signals • 24 channels used • No sync byte • Can also interleave DS-1 channels • Ds-2 is four DS-1 giving 6.312Mbps

  33. ISDN User Network Interface • ISDN allows multiplexing of devices over single ISDN line • Two interfaces • Basic ISDN Interface • Primary ISDN Interface

  34. Basic ISDN Interface (1) • Digital data exchanged between subscriber and NTE - Full Duplex • Separate physical line for each direction • Pseudoternary coding scheme • 1=no voltage, 0=positive or negative 750mV +/-10% • Data rate 192kbps • Basic access is two 64kbps B channels and one 16kbps D channel • This gives 144kbps multiplexed over 192kbps • Remaining capacity used for framing and sync

  35. Basic ISDN Interface (2) • B channel is basic user channel • Data • PCM voice • Separate logical 64kbps connections o different destinations • D channel used for control or data • LAPD frames • Each frame 48 bits long • One frame every 250s

  36. Frame Structure

  37. Primary ISDN • Point to point • Typically supporting PBX • 1.544Mbps • Based on US DS-1 • Used on T1 services • 23 B plus one D channel • 2.048Mbps • Based on European standards • 30 B plus one D channel • Line coding is AMI usingHDB3

  38. Primary ISDN Frame Formats

  39. SONET: Synchronous Optical Network • Specification for high-speed digital transfer via optical fiber • Rates from 51.84Mbps to 13.2Gbps • Uses Synchronous TDM

  40. Sonet/SDH • Synchronous Optical Network (ANSI) • Synchronous Digital Hierarchy (ITU-T) • Compatible • Signal Hierarchy • Synchronous Transport Signal level 1 (STS-1) or Optical Carrier level 1 (OC-1) • 51.84Mbps • Carry DS-3 or group of lower rate signals (DS1 DS1C DS2) plus ITU-T rates (e.g. 2.048Mbps) • Multiple STS-1 combined into STS-N signal • ITU-T lowest rate is 155.52Mbps (STM-1)

  41. SONET Frame Format

  42. SONET STS-1 Overhead Octets

  43. Statistical Time Division Multiplexing • requires digital signaling & transmission • data rate capacity required is well below the sum of connected capacity • same concepts as synchronous TDM • uses memory buffers to avoid loss of data • widely used for remote communications with multiple terminals • similar to medium-sharing done by LANs

  44. Statistical TDM • In Synchronous TDM many slots are wasted • Statistical TDM allocates time slots dynamically based on demand • Multiplexer scans input lines and collects data until frame full • Data rate on line lower than aggregate rates of input lines

  45. t1 t2 t3 waste bandwidth Synchronous TDM C1 B2 D1 C2 A2 D2 A1 A B1 B 1stcycle 2ndcycle C D extra bandwidth available Statistical TDM Datatobesent A1 B1 B2 C2 2nd cycle 1st cycle Statistical TDM

  46. Statistical TDM Frame Formats

  47. Performance • Output data rate less than aggregate input rates • May cause problems during peak periods • Buffer inputs • Keep buffer size to minimum to reduce delay

  48. Buffer Size and Delay

  49. Asymmetrical Digital Subscriber Line • ADSL • Link between subscriber and network • Local loop • Uses currently installed twisted pair cable • Can carry broader spectrum • 1 MHz or more

  50. ADSL Design • Asymmetric • Greater capacity downstream than upstream • Frequency division multiplexing • Lowest 25kHz for voice • Plain old telephone service (POTS) • Use echo cancellation or FDM to give two bands • Use FDM within bands • Range 5.5km

More Related