1 / 15

From Last Time….

ME 083 Thermodynamic Aside: Gibbs Free Energy Professor David M. Stepp Mechanical Engineering and Materials Science 189 Hudson Annex david.stepp@duke.edu 549-4329 or 660-5325 24 February 2003. From Last Time…. Gibbs Free Energy: G = H – T*S

keelie-holmes
Télécharger la présentation

From Last Time….

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ME 083Thermodynamic Aside:Gibbs Free EnergyProfessor David M. SteppMechanical Engineering and Materials Science189 Hudson Annexdavid.stepp@duke.edu549-4329 or 660-532524 February 2003

  2. From Last Time…. • Gibbs Free Energy: G = H – T*S • Recall our Arrhenius relationship for the equilibrium number of vacancies (defects): • Frenkel defects (vacancy plus interstitial defect)

  3. THERMODYNAMIC ASIDE: GIBBS FREE ENERGY A State Function (Depends only on the current condition of the system) Kinetic (motion), Potential (position), and INTERNAL (molecular motions) • How can we change a material’s (or system’s) internal energy? ∆U = Q + W + W’ • Energy of a System: • Three Categories of Energy: • State Function Internal Energy:

  4. State Function Internal Energy (U): ∆U = Q + W + W’ (The First Law of Thermodynamics) Q: Heat flow (into system) W: P-V work (on system) W’: Other work (on system) Energy Conservation Processes in nature have a natural direction of change DOES NOT SPONTANEOUS OCCUR

  5. State Function Entropy (S) ∆SP ≥ 0 The Entropy of a system may increase or decrease during a process. The Entropy of the universe, taken as a system plus surroundings, can only increase. (The Second Law of Thermodynamics) • “Entropy is Time’s Arrow” Note: The laws of thermodynamics are empirical, based on considerable experimental evidence.

  6. One Can Show That: For Reversible Processes QREV = TdS • QREV denotes the maximum heat absorbed • Note the cyclic path integral (reversibility) • With this, the combined Notation for the First and Second Law can be expressed: dU =TdS + dWREV + dW’ BUT dWREV = F*dx = F*(A/A)*dx = F/A*(-dV) = -PdV dU = TdS – PdV + dW’ Combined statement of First and Second Laws

  7. The Third Law of Thermodynamics: The Entropy of all substances is the same at 0 K Both Entropy and Temperature Have Absolute Values (Both have an empirically observed zero point) • State Function Enthalpy (H) H = U + P*V So: dH = dU + PdV + VdP Consider the special case where dP = 0 and dW’ = 0: dHP = TdSP = dQREV,P

  8. State Function Gibbs Free Energy G = H – TS = U + PV - TS dG = dU + PdV + VdP – TdS – SdT = (TdS – PdV + dW’) + PdV + VdP – TdS – SdT = VdP – SdT + dW’ Special Case of dT = 0 and dP = 0: dGT,P = dW’T,P Or, if W’ = 0: dGP = -SdT At constant Temperature and Pressure, the (change in) Gibbs Free Energy reflects all non-mechanical work done on the system.

  9. Back to Crystals… Consider Frenkel Defects (vacancy + interstitial) The Free Energy of the Crystal can be written as • the Free Energy of the perfect crystal (G0) • plus the free energy change necessary to create n interstitials and vacancies (n*∆g) • minus the entropy increase that derives from the different possible ways in which defects can be arranged (∆SC) ∆G = G-G0 = n*∆g - T∆SC n = the number of defects ∆g = ∆h - T∆S (the energy to create defects)

  10. The Configurational Entropy, ∆SC, is proportional to the number of ways in which the defects can be arranged (W). ∆SC = kB* ln(W) (The Boltzmann Equation) Note: this constitutes a connection between atomistic and phenomenological descriptions (thru statistics). • Perfect Crystal: N atoms which are indistinguishable can only be placed in one way on the N lattice sites: ∆SC = k*ln(N!/N!) = k*ln(1) = 0

  11. Crystal with Vacancies and Interstitials With N normal lattice sites (and equal interstitial sites), ni (number of interstitial atoms) can be arranged in: distinct ways Similarly, the vacant sites can be arranged in: distinct ways

  12. Recalling that the equilibrium number of vacancies obeys an Arrhenius relationship: Remember: ∆g = ∆h - T∆s Therefore: Assuming configurational entropy in creating defects is negligible Now compare this with our equation for Frenkel Defects:

  13. The Configurational Entropy of these non-interacting defects is: Probability theory for statistically independent events: PAB = PA * PB • Stirling’s Approximation for Large Numbers: ln(x!) ≈ x * ln(x) - x Recalling that ni = nv = n (for Frenkel defects):

  14. At equilibrium, the free energy is a minimum with respect to the number of defects Note: Entropy (per defect) is a maximum at this point Recall: ∆G = G – G0 = n * ∆g – T∆SC G = G0 + n * (∆h – T∆s) - T∆SC

  15. Next Time… • The Statistical Interpretation of Entropy ∆SC = k* ln(W) Configurational Entropy is proportional to the number of ways in which defects can be arranged

More Related