Download
structure repairs rehabilitation in low strength masonry buildings n.
Skip this Video
Loading SlideShow in 5 Seconds..
Structure Repairs & Rehabilitation In Low Strength Masonry Buildings PowerPoint Presentation
Download Presentation
Structure Repairs & Rehabilitation In Low Strength Masonry Buildings

Structure Repairs & Rehabilitation In Low Strength Masonry Buildings

139 Vues Download Presentation
Télécharger la présentation

Structure Repairs & Rehabilitation In Low Strength Masonry Buildings

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Structure Repairs & Rehabilitation In Low Strength Masonry Buildings PresentationFromTSG

  2. StructureRepairs & Rehabilitation Low Strength Masonry Building is Laid in • Fired brick work in clay & mud mortar • Random rubble ; Uncoursed, Undressed stone masonry in weak mortars made of cement-sand , lime-sand & clay-mud.

  3. StructureRepairs & Rehabilitation Component Of Low Strength Masonry Building: • Foundation • Flooring • Brick/ Stone Columns • Brick Work • Stone Masonry • Wood Work • Slab • Slopping Wooden frame Roof • Plaster

  4. Structure Repairs & Rehabilitation Life Of Structure Depend Upon: • Geography Of Location • Building Material • Technology • Workmanship

  5. StructureRepairs & Rehabilitation A . Geography Of Location: • Type of Strata • Water Table • Earth Quack, Wind, Cyclone, Flood, Snow • Pollutant • Land Slide • Tree location w.r.t. building

  6. StructureRepairs & Rehabilitation B . Building Materials • Cement • Lime • Fine Sand • Coarse Sand • Coarse Aggregate • Quality of Water • Bamboo/Wood • Brick

  7. StructureRepairs & Rehabilitation C. Technology • Architectural Design • Structural Design Based On Load Bearing Wall • Construction Methods • Quality Practices • Construction Management

  8. StructureRepairs & Rehabilitation D Workmanship • Structural Work • Finishing Work • Water Proofing Work • Development of Drainage (Internal & External) • Maintenance Of Building

  9. StructureRepairs & Rehabilitation Building Needs Repairs & Retrofitting • Crack & Spalling In Structural Members • Crack & Settlement In Flooring • Crack & Spalling in Non Structural Members • Leakage In Water Supply & Drainage System • Redesigning existing structure for nature forces • Changed functional requirements

  10. StructureRepairs & Rehabilitation Crack & Spalling In Structural Members • Cracks Occur Due To Settlement In Foundation • Cracks Due To Earth Quack ,Wind • Crack Due To Overloading Of Structure • Crack Due To Reduction in Load Carrying Capacity of Structure Due To Weathering • Crack Due To Improper Design Of Structure • Crack due to Poor connection Of Structural Members Resulted From Poor Workmanship

  11. StructureRepairs & Rehabilitation Crack & Settlement In Flooring • Due To Improper Plinth Filling • In case of black cotton soil in foundation not replaced up to sufficient depth by Good Soil under plinth (For generating enough Counter weight upon black cotton soil) • Water Table vary within the Plinth Sub base (this occur in frequent flooding area & near sea soar) • Improper curing, Improper laying, Poor Quality of workmanship. • Improper design for loading i.e. thickness & type of flooring.

  12. StructureRepairs & Rehabilitation Crack & Spalling in Non Structural Members • Crack In Plaster • Crack In Finishing • Crack In Water Proofing Work • Vertical cracks in long boundary wall due to thermal movement Or Shrinkage. • Crack Induced due to thermal changes, change in moisture content in building material, Chemical Reactions

  13. StructureRepairs & Rehabilitation Leakage In Water Supply & Drainage • It may result from structural cracks & settlement • Improper selection of pipe thickness • Improper selection of Supports & its spacing to Pipe • Improper making Of joints • Non Provision for contraction & expansion (Particularly when pipe is passing over different type of long structures) • Non Testing of Pipe before & after laying • Insufficient soil cover over pipe

  14. StructureRepairs & Rehabilitation Redesigning existing structure to meet functional requirement as well as forces generated by Nature It is a comprehensive task & require planning which include following Information gathering. • Field investigations including details of sub strata, foundation details • Type of Existing structure & its members stability • Design Data Collection • Identification of components required to be strengthened, replaced. • Cost Estimates (it is feasible up to 60% of new construction) • Method or Procedure to be fallowed.

  15. StructureRepairs & Rehabilitation Crack Investigation • Location • Profile (vertical, Horizontal, Diagonal) • Crack Size throughout length (Width,Depth & length) Thin crack< 1mm Medium Crack >1 to 2 mm Wide Crack > 2 mm Crack may be non-uniform width. i.e. Tapper in width(narrow at one end & wider at other end. ) • Static or Live cracks

  16. StructureRepairs & Rehabilitation Widening Of Crack • Cracks are static or live, is monitored & recorded by “Tell-Tale” method Crack in wall Quick setting mortar or Adhesive Marking in Glass Crack in Glass strips Glass strips of 2 to 3 C.M. in width & 10 to 12 C.M.in length

  17. StructureRepairs & Rehabilitation These Crack occur around opening due to drying shrinkage & thermal movement in a building resulting weakening in the wall.

  18. StructureRepairs & Rehabilitation Expansion & thickening of roots creating concentration of stress at joints & weak locations such as openings

  19. StructureRepairs & Rehabilitation The long horizontal crack resulted due to deflection of slab and lifting up of edge of the slab, combined with horizontal movement in the slab due to shrinkage.

  20. StructureRepairs & Rehabilitation This Cracks are due to pull exerted on the wall by the slab because of drying shrinkage and thermal contraction this pull results in bending of the wall which causes cracking at a weak section, that is, at the lintel or sill level of the window openings. Such cracks generally occurs when windows and room spans are very large. This cracks can be avoided by providing slip joints at slab supports on the walls.

  21. StructureRepairs & Rehabilitation Concrete Fillet Construction Details Of Bearing Of R.C.C. Roof Slab Over a Masonry Wall Brick tiles or Cement mortar with chequer grove finish 12 mm Gap ,3/4 filled with Mastic Compound First Course Of parapet masonry is thicker than the wall By half Brick 12 mm wide groove in plaster Slip Joint(two or three layer of tarred paper are placed over plastered surface)

  22. StructureRepairs & Rehabilitation Thickness of plaster is to much high & silt content is also Very High

  23. StructureRepairs & Rehabilitation Longer opening & less bearing & deteriorated lintel load capacity exposes diagonal crack which is widened towards corner wall edge.

  24. StructureRepairs & Rehabilitation Vertical crack under window occur when wall have large window opening & little wall space on both side of opening. Difference in stress due to more stress in wall portion adjoining to window & less stressed portion under sill of window results in crack.

  25. StructureRepairs & Rehabilitation Cantilever Chajja not having main bars on upper face

  26. Structure Repairs & Rehabilitation When two adjacent walls shake in different directions, their joint at corners comes under a lot of stress. This causes crack at the junction of two walls. In Normal conditions, cracks in this location comes when one of wall expand more than short wall.

  27. Structure Repairs & Rehabilitation When the long wall bends outward or inwards vertically in the middle of its length, this stretching causes tension and causes vertical cracks in the walls.

  28. Structure Repairs & Rehabilitation Similarly when the walls bends outward or inwards horizontally in the middle of its height, this stretching causes tension and causes horizontal cracks in the walls. This happens at the base of gable wall.

  29. Structure Repairs & Rehabilitation Many times the wall gets pulled from its corners. This results in to tearing of wall in diagonal direction. In the wall if there is a window or a door, then the diagonal crack occur at their corners.

  30. Structure Repairs & Rehabilitation Flexural Tension Cracks At Lintel Level Due to Shrinkage & contraction of R.C.C. Slab

  31. Structure Repairs & RehabilitationIf the window is very large or if there are many doors and windows in a wall, then it tears even more easily in an earthquake.

  32. Structure Repairs & Rehabilitation Many times the roof slides on topof the walls on which it is sitting on

  33. StructureRepairs & Rehabilitation Structural Repairs Load Bearing Walls: PROCEDURE IN NEXT SLIDE CRACK IN BRICK PLACING OF RCC BLOCK AFTER CUTTING HOLE IN B.W.

  34. StructureRepairs & Rehabilitation Repairing Of Crack Due To Structural Cause • Replace all cracked bricks • Use R.C.C. Stitching Block In Vertical Spacing In Every 5th or 6th Course ( 0.5 meter apart ). • Stitching block Width=equal to wall width, Length = 1.5 to 2 bricks, Thick =1 or 2 bricks as per severity of cracks • Mortar For Repairs 1:1:6 (1 Cement :1 lime: 6 sand)

  35. StructureRepairs & Rehabilitation load bearing walls(May be Brick or Stone) have inbuilt deficiency. • Each Brick have different strength • Thickness of Mortar Joints are not also uniform. • Bricks are not perfectly laid horizontally & vertically • Opening in walls • Improper staggered joints • Use of unwanted Brick bats 1. These resulted in cumulative effect & concentration of stress in particular section of wall is more than other section.

  36. StructureRepairs & Rehabilitation Corrective Measures For Load Bearing Wall Building • Therefore Shifting of Window, Door ,Inbuilt construction of Almirah should be carried out with due consideration to IS code 13828:1993 • Proper Bearing to lintel over brick work to avoid diagonal cracks & it can be done in retrofitting work. • It is advisable to keep window width as less as feasible while height can be increased with fixed glass pans on top portion as per slide 41.

  37. StructureRepairs & Rehabilitation Importance Factor(I) Depend Upon • Functional Use Of Structures • Hazardous Consequences Of Its Failure • Post Earthquake Personal needs • Historical Value • Economic Importance • School Building Have “I” value=1.5

  38. StructureRepairs & Rehabilitation Elevation : Distance b1 to b8 changes as per Building Retrofitting Need l1 l2 b8 t 3 h3 b7 b6 b2 b3 b1 2 2 2 h2 b4 1 h2 1 h1 b5 b4 b5 b4 b4

  39. StructureRepairs & Rehabilitation Table :Size, Position Of Opening In Above Figure

  40. StructureRepairs & Rehabilitation • Strengthening Of Window When Its Position Is Not As Per Table Above Slide No 42. 10 Ø 60 30 75 150 Window 6 Ø @ 150 X X Two Nos HYSD Bars Section X-X

  41. StructureRepairs & Rehabilitation Strengthening Arrangements Recommended For low Strength Masonry Building b = Lintel Bend C = Roof Bend, Gable bend d = Vertical steel at corners & junctions of wall f = Bracing in plan at tie level of Pitched Roofs g = Plinth band For Building of Category ‘B’ in two storey constructed with stone masonry in weak mortar, provide vertical steel of 10 mm dia in both storey.

  42. StructureRepairs & Rehabilitation Strengthening Arrangements Recommended For Elements of low Strength Masonry Building

  43. StructureRepairs & Rehabilitation • Seismic wave propagation increases as height of wall/structure increases. • Seismic wave expansion pushes bricks of corner of wall out of building. • Movement of Seismic wave through joints of similar or dissimilar component of building ,makes joint open, resulting in falling of component of the building.

  44. StructureRepairs & Rehabilitation Possibility For Old Masonry Structures Strength • Plinth Belt in lieu of plinth band • Lintel level belt in lieu of band • Roof level/ gable level band • Corner steel • Shape, Size & location of Window In Wall • Wall length to Height Ratio • Cross wall/ Brick Pillar/counter fort

  45. Structure Repairs & Rehabilitation Reinforced band on top of gable wallIt will reduce bending of gable wall

  46. Structure Repairs & RehabilitationIn long walls introduce buttressto strengthen it.

  47. StructureRepairs & Rehabilitation Low Strength Masonry Building Retrofitting For Brick Masonry Structure • Height of the building in B.W. shall be restricted to the following. • For retrofitting category of building A,B,C up to3 storey with flat roof or 2 storey plus Attic for pitched roof. • For category D up to 2 storey with flat roof or one storey plus Attic for pitched roof. where each storey height shall not exceed 3.0 m. Cross wall spacing should not be more than 16 times the wall thickness CONTD.

  48. StructureRepairs & Rehabilitation 3. Minimum wall thickness in brick masonry shall be one brick for one & two storey construction, while in case of three storey, the bottom storey wall thickness is one & half brick. 4. Use brick from kiln only after 2 weeks when work is in summer & 3 week when work in winter. 5. Use leaner mortar preferably also adding lime for repairing cracks in particular& in masonry in general. It can be 1:1:6,1:2:9,1:3:12 as per need.

  49. StructureRepairs & Rehabilitation For Stone Masonry • Height of the building in Stone Masonry shall be restricted to the following • For retrofitting category of building A,B,—2 storey with flat roof or 1 storey plus Attic for pitched roof .In case cement sand mortar 1:6, the building up to 2 storey plus Attic for pitched roof. • 2. For category C,D– 2 storey with flat roof or 2 storey plus Attic for pitched roof with Cement sand mortar or 1 storey plus Attic for pitched roof with lime- sand or mud mortar. CONTD.

  50. StructureRepairs & Rehabilitation 3. Maximum wall thickness in stone masonry shall be 450 mm & preferably 350 mm. , • Each storey height shall not exceed 3.0 m and span of walls between cross wall is limited to 5.0m