1 / 12

培养基、试剂的配制及 细菌纯化培养

培养基、试剂的配制及 细菌纯化培养. LB 培养基. 配制 1 升培养基,应在 950ml 去离子水中加入: 细菌培养基用胰化蛋白胨 (bacto-tryptone) 10g 细菌培养基用酵母提取物 (bacto-yeast extract) 5g NaCl 10g 摇动容器直至溶质完全溶解, 5mol/L NaOH( 约 0.2ml) 调节 pH 值至 7.0, 加入去离子水至总体积为 1L , 15 lbf/in 2 (1.034×10 5 Pa) 高压下蒸汽灭菌 20 分钟。. STE.

keona
Télécharger la présentation

培养基、试剂的配制及 细菌纯化培养

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 培养基、试剂的配制及细菌纯化培养

  2. LB培养基 • 配制1升培养基,应在950ml去离子水中加入: • 细菌培养基用胰化蛋白胨(bacto-tryptone) 10g • 细菌培养基用酵母提取物(bacto-yeast extract) 5g • NaCl10g • 摇动容器直至溶质完全溶解,5mol/L NaOH(约0.2ml)调节pH值至7.0,加入去离子水至总体积为1L,15 lbf/in2(1.034×105Pa)高压下蒸汽灭菌20分钟。

  3. STE • 0.1mol/L NaCl10mmol/L Tris·Cl (pH8.0)1mmol/L EDTA(pH8.0)在15 lbf/in2(1.034×105Pa)高压下蒸汽灭菌20分钟。

  4. 溶液 Iback • 50 mmol/L 葡萄糖 • 25 mmol/L Tris·Cl (pH8.0) • 10 mmol/L EDTA (pH8.0) • 在10 lbf/in2(6.895×104Pa)高压下蒸汽灭菌15分钟,保存于4℃。

  5. 溶液 IIback • 0.2 mol/ L NaOH(从5mol/L贮存液中现用稀释) • 1% SDS

  6. 溶液 IIIback • 5mol/L 乙酸钾 60ml • 冰乙酸 11.5ml • 水 28.5ml • 所配成的溶液重钾的浓度为3mol/L,乙酸根的浓度为5mol/L。

  7. 3M乙酸钠(pH5.2)back • 在800ml水中溶解408.1g三水乙酸钠,用冰乙酸调节pH值至5.2,加水定容到1L,分装后高压灭菌。

  8. 0.5 mol/L EDTA (pH8.0) • 在800ml 水中加入 186.1g EDTA-Na·2H2O,在磁力搅拌器上剧烈搅拌,用NaOH调节溶液的pH值至8.0 (约20g NaOH颗粒),然后定容至1 L,分装后高压灭菌。 1 mol/L Tris·Cl (pH8.0) • 在800ml 水中加入 121.1g Tris-base,溶解后加浓盐酸调节溶液的pH值至8.0 ,定容至1 L,分装后高压灭菌。

  9. TE(pH8.0)back • 10 mmol/L Tris·Cl (pH8.0)1 mmol/L EDTA (pH8.0)

  10. 50×TAE • 242g Tris 碱 • 57.1 冰乙酸 • 100ml 0.5mol/L EDTA (pH 8.0) 1×TAE • 0.04 mol/L Tris-乙酸 • 0.001 mol/L EDTA (pH 8.0)

  11. 器材 • 1. 恒温摇床 • 2. 超净工作台 • 3. 离心机 • 4. 电泳仪和电泳槽 • 5. 玻璃器皿与耗材 • 量筒、三角瓶、平皿; • EP管(1.5ml, 0.5ml); • 枪头(1ml, 0.2ml, 10μl); • 牛皮纸、纱布、牙签等

  12. 培养细菌: • 将带有质粒的大肠杆菌接种到1.5-3ml含有相应抗生素的液体培养基,37℃培养12~16小时(过夜);

More Related