1 / 14

Soil OM is 50-65% C, so we use 57.5% SOM x 0.575 = OC and SOM = OC/0.575 e.g., how much SOM do you have with 2% OC? SOM

Soil OM is 50-65% C, so we use 57.5% SOM x 0.575 = OC and SOM = OC/0.575 e.g., how much SOM do you have with 2% OC? SOM = 2% ÷ 0.575 = 3.5% or 2% ÷ 0.50 to 0.65 = 4 to 3% OC. Acidic conditions. pH dependent surface charge:

khuong
Télécharger la présentation

Soil OM is 50-65% C, so we use 57.5% SOM x 0.575 = OC and SOM = OC/0.575 e.g., how much SOM do you have with 2% OC? SOM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Soil OM is 50-65% C, so we use 57.5% SOM x 0.575 = OC and SOM = OC/0.575 e.g., how much SOM do you have with 2% OC? SOM = 2% ÷ 0.575 = 3.5% or 2% ÷ 0.50 to 0.65 = 4 to 3% OC

  2. Acidic conditions pH dependent surface charge: S-OH + H+ ↔ S-OH2+ protonation (gains protons, attracts anions) S-OH ↔ S-O- + H+ deprotonation (loses protons, attracts cations) S-OH + OH- ↔S-O- + H2O deprotonation alkaline conditions (loses protons, attracts cations) pKa’s and Henderson-Hasselbalch eqn tell us whether a compound will be mostly charged (usually negatively) or uncharged at a given pH

  3. Point of Zero Charge PZC  suspension pH at which the particle surface has zero net charge: p = 0 1. When pH < PZC the particle surface is positively charged 2. When pH > PZC the particle surface is negatively charged 3. At PZC, settling of flocs occurs – important in aggregation and retention of ions during irrigation, leaching, etc. * uncharged particles don’t repel each other

  4. pH < PZC (p > 0, positively charged): S-OH + H+ ↔ S-OH2+ pH > PZC (p < 0, negatively charged): S-OH ↔ H+ + S-O- pH = PZC (p = 0, uncharged): H+ + S-O- ↔ S-OH

  5. pH below the pHZPC http://www.gly.uga.edu/schroeder/geol6550/zpcphlow.gif

  6. pH at the pHZPC

  7. pH above the pHZPC

  8. Soil components vary in PZC • Fe and Al oxides (Oxisols, tropical soils) have high PZC (pH 5-10) • Soil organic matter has low PZC (pH<5) • Silicate clays have low PZC (pH 2-5) Interpretation: low PZC = net negative charge over wider soil pH range  more cation adsorption and more CEC High PZC = net positive charge in acid conditions or in lower range of soil pH  more anion adsorption and less CEC • Consider the distribution of soil components in the profile – where would you expect to see more or less anion and cation adsorption? more CEC in Ap or Bt horizons, more AEC in oxide-rich horizons or low OM depths

  9. MineralpHZPC Gibbsite 5 - 10   Hematite  6 - 7 Goethite  7 – 8 Amorphous Fe(OH)3  8 - 9 Kaolinite  4 - 5  Montmorillonite  2 - 3 SiO2  1 - 3 Note that Al and Fe oxides have a high pHZPC Kaolinite and montmorillonite have low pHZPC pH for zero point of charge for minerals

  10. Types of PZC • PZC, p = 0 • Apply electric field, PZC reached when particles flocculate or stop moving • PZNC (N for net), CEC-AEC =0; is + os +d = 0 • Measure Na+ and Cl- sorption with pH; PZNC calculated from intersection point • PZNPC (P for proton), H = 0 (or zero variable charge) • PZSE (SE for salt effect), intersection of two potentiometric titration curves • Most commonly measured

  11. Desorption • removing an ion or molecule from a surface particle and putting it back into solution. • Important for decontamination of soil or sediments and to determine the mobility of contaminants • Hysteresis  apparent irreversibility of sorption (forward and backward reactions did not coincide)

  12. Hysteresis causes: • Experimental error: failure to attain equilibrium during sorption experiments • Chemical or biological transformations not accounted for in sorption study • Trapping of ions or molecules in soil micropores resulting in very slow release •  short term lab sorption experiments may be inadequate to predict behavior over long time periods under field conditions.

  13. q Ceq Example of hysteresis during desorption in a batch equilibrium sorption experiment

  14. Adsorption (open symbols) and desorption (full symbols)isotherms of water at 25 °C on (a) a TiO2 film deposited at 80 °C for 2 h and (b) the same powder after heating at 450 °C http://www.lnqe.uni-hannover.de/projekte/projekte_oekermann.htm#fig4

More Related