1 / 11

XTAX repair

XTAX repair. Réunions de chantier. Activités S11. Montage bunker (Transport) Déconnexions hydrauliques Déconnexions électriques Equipment bunker ( Abou ) Montage cadre repère positionnement blocs toiture (Sébastien) Tests table EHN1 (Intégration avec PR532 et dans le bunker, Transport)

kiefer
Télécharger la présentation

XTAX repair

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. XTAX repair Réunions de chantier

  2. Activités S11 • Montage bunker (Transport) • Déconnexions hydrauliques • Déconnexions électriques • Equipment bunker (Abou) • Montage cadre repère positionnement blocs toiture (Sébastien) • Tests table EHN1 (Intégration avec PR532 et dans le bunker, Transport) • Déplacement des blocs dans le chemin (Transport + Sylvain) • Déplacement des PMI dans le chemin (Team RP) • Repérage index trajectoire tables (Transport + Sylvain) • Préparation zone stockage blocs toiture (Abou + Sylvain) • Pose de bouchons sur départs cooling XTAX (Maxime, Sylvain)

  3. Mini-scan (T. Dobers)

  4. Proposition recablage Compatible avec DIMR

  5. Activités S12 • Aspiration eau autour des XTAX (Dino, Sébastien) • Montage cadre repère positionnement blocs toiture (Sébastien) • Equipment bunker (Abou) • Déplacement des blocs dans le chemin (Transport + Sylvain) • Repérage index trajectoire tables (Transport + Sylvain) • Préparation zone stockage blocs toiture (Abou + Sylvain) • Dépose toiture XTAX 2 (transport) • Transport – réparation – réinstallation table avale H2 (team) • Reconnexion électrique et test table avale H2(Jérôme) • Transport – réparation – réinstallation table avale H4 (team)

  6. Planning

  7. Réparation tables

  8. Contraintes Nous allons commencer les tests des convertisseur du BA-80 Aux-PS ce vendredi (16 mars à 9h), ces tests dureront normalement jusqu’au vendredi 23 mars 17h, si nous rencontrons des soucis les tests pourront être prolongés, dans ce cas nous vous le ferons savoir à l’avance. Si vous avez besoin d’accéder à des équipements particulier pendant ce laps de temps cela est possible en vous concertant avec nous. Dès que cette zone sera terminée nous embrayerons sur les convertisseurs de la zone Nord. Cordialement, Emin Ozturk Coordinateur FSU- TE11.

  9. RPL monitors Position of RPL’s installed on XTAX 2, XTAX 4 and XTAX 6 (Mai 26th 2011, North Area TCC2) The dosimeters are put in a petribox and are numbered as marked in the enclosed drawing. At recuperation, it would nevertheless be good to re-verify the markings to exclude errors (L and R stand for Left and Right, moving with the beam, E and S stand for Entrée and Sortie, my excuses for the language mix). The petriboxes were equipped with ‘scratch-tape’ (Velcro) and glued UNDER the motors (unfortunately no place was available on top), in most cases at the electrical connection box (no cooling ribs and easy to wipe with a rag to assure best adhesion). In two cases there was no sufficient place to glue them on this box and they were positioned close to that place. An effort was made to make at least a part of the box visible so that recuperation could be fast. One box (XTAX4 LE) cracked at installation and one should be prepared that it could break down at recuperation. For information: after six months without beam, the dose-cost for installation was approx. 100µ Sv (one person)

  10. Suivi dosimétrique

  11. Extraction Mercredi 14.03 fin de journée

More Related