1 / 24

Produced by Khodr Hussein Drafting Teacher Cass Technical High School Detroit Michigan

Produced by Khodr Hussein Drafting Teacher Cass Technical High School Detroit Michigan. Learn to Prepare the Drawing Area on a 8.5 x11 paper. 1. Identify and use the tools needed 2. Secure the paper to the drawing board 3. Draw the Border Lines 4. Draw the Title Block with guidelines

kiley
Télécharger la présentation

Produced by Khodr Hussein Drafting Teacher Cass Technical High School Detroit Michigan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Produced by KhodrHussein Drafting Teacher Cass Technical High School Detroit Michigan

  2. Learn to Prepare the Drawing Areaon a 8.5 x11 paper 1. Identify and use the tools needed 2. Secure the paper to the drawing board 3. Draw the Border Lines 4. Draw the Title Block with guidelines 5. Add details and information in the title block 6. Understand the properties of the Working Area

  3. Equipments you need: Drafting Board 8.5 x 11 White paper Triangle Drafting Tape Triangle Straight Edge Drafting pencils Ruler

  4. Learn to Prepare the Drawing Areaon a 8.5 x11 paper 1. Identify and use the tools needed 2. Secure the paper to the drawing board 3. Draw the Border Lines 4. Draw the Title Block with guidelines 6. Add details and information in the title block 7. Understand the properties of the Working Area

  5. 2. Secure the paper to the drawing board 2.1 First: Place the Straight edge few inches above the bottom edge of the Drawing Board Straight Edge

  6. 2. Secure the paper to the drawing board 2.2 Next: align the bottom edge of the paper to the top edge of the Straight-Edge Tip: you may roll up the two bottom corners of the paper so it would not slide under the edge 8.5 x 11 White paper Straight-Edge Next

  7. 2. Secure the paper to the drawing board 2.3 Now: Tape both top edges of the paper tip: Keep the tape closer to the corner to allow for drawing the border lines. 8.5 x 11 White paper Straight-Edge Next

  8. 2. Secure the paper to the drawing board 2.4 Finally: Tape both bottom edges of the paper 8.5 x 11 White paper Straight Edge

  9. Learn to Prepare the Drawing Areaon a 8.5 x11 paper 1. Identify and use the tools needed 2. Secure the paper to the drawing board 3. Draw the Border Lines 4. Draw the Title Block with guidelines 6. Add details and information in the title block 7. Understand the properties of the Working Area

  10. 3. Draw the Border Lines 3.1 First: using the Ruler, measure ½” from left edge of the paper Tip: align the ruler with the straight edge and then place a light dash parallel to the edge on the ½” mark ½” Straight Edge Next

  11. 3. Draw the Border Lines 3.2 Next: Draw a vertical line on the ½” mark Triangle Note : This line must be very light Tip: draw line from top to bottom ½” Straight Edge Next

  12. 3. Draw the Border Lines 3.3 Measure ½” from right edge of the paper Triangle ½” ½” Straight Edge

  13. 3. Draw the Border Lines 3.4 Measure ½” from Top edge of the paper 3.5 Now Draw the Top Border Line Tip: Keep all lines light until you are instructed to darken ½” ½” ½” Straight Edge Next

  14. 3. Draw the Border Lines 3.6 Measure ½” from Bottom Edge of the paper 3.7 Now Draw the BottomBorder Line ½” ½” ½” ½” Straight Edge Next

  15. Learn to Prepare the Drawing Areaon a 8.5 x11 paper 1. Identify and use the tools needed 2. Secure the paper to the drawing board 3. Draw the Border Lines 4. Draw the Title Block with guidelines 6. Add details and information in the title block 7. Understand the properties of the Working Area

  16. 4. Draw the Title Block with guidelines 4.1 Measure ½” from Bottom Border line 4.2 Now Draw the top of the Title Block ½” Straight Edge Next

  17. 4. Draw the Title Block with guidelines 4.3 Now Layout the measurements for the guidelines 1/16 “ 1/8“ 1/8“ 1/8“ 1/16 “ Straight Edge Next

  18. 4. Draw the Title Block with guidelines 4.4 Draw the guidelines 4.5 Now draw the title block section dividers Remember the measurements ½” 3” 4” 3” 1/16 “ 1/16 “ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/8“ 1/16 “ 1/16 “ Next

  19. Learn to Prepare the Drawing Areaon a 8.5 x11 paper 1. Identify and use the tools needed 2. Secure the paper to the Drawing Board 3. Draw the Border Lines 4. Draw the Title Block with Guidelines 6. Add details and information in the Title Block 7. Understand the properties of the Working Area

  20. 6. Add details and information in the Title Block 6.1 Start with your Name in the Top Left Section 6.2 Add the Class, and the Semester under Name 6.3 Add the Name of the Drawing in the Top Middle 6.4Add the Topic Section under drawing Name 6.5 Add the Date in the Top of End Section 6.6 Add Teacher Name in Bottom End Section ½” 4” 3” 3” JOHN DOE PREPARING WORK AREA 12/12/3001 BASIC PROCEDURES MR SEAN DOE DRAFTING I Next

  21. 6. Add details and information in the Title Block `You may darken necessary lines now Or wait until you fininsh the assigned drawing so you do not cause lead smudges while drawing ½” 3” 4” 3” JOHN DOE PREPARING WORK AREA 12/12/3001 BASIC PROCEDURES MR SEAN DOE DRAFTING I Next Next

  22. Learn to Prepare the Drawing Areaon a 8.5 x11 paper 1. Identify and use the tools needed 2. Secure the paper to the Drawing Board 3. Draw the Border Lines 4. Draw the Title Block with Guidelines 6. Add details and information in the Title Block 7. Understand the properties of the Working Area

  23. LENTH 7. Understand the properties of the Working Area Length of the Working Area (LWA) 10” Given the Border Lines and the Title Block, Always Remember: The Working Area has the following measurements LWA = 10” WWA = 7” Width of the Working Area ( WWA) 7” ½” JOHN DOE PREPARING WORK AREA 12/12/3001 BASIC PROCEDURES MR SEAN DOE DRAFTING I Next Next

  24. The End

More Related