1 / 11

EECS150 Fall 2000 Checkpoint #1 Wire-wrap, SRAM, and FIFO Design by Ramakrishna Gummadi Norm Zhou

EECS150 Fall 2000 Checkpoint #1 Wire-wrap, SRAM, and FIFO Design by Ramakrishna Gummadi Norm Zhou. Goals of the Lab. Learn to do wire-wrap Wire an SRAM to the Xilinx on the design demonstration board, test and debug it

kyla-guzman
Télécharger la présentation

EECS150 Fall 2000 Checkpoint #1 Wire-wrap, SRAM, and FIFO Design by Ramakrishna Gummadi Norm Zhou

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EECS150 Fall 2000Checkpoint #1Wire-wrap, SRAM, and FIFO Designby Ramakrishna GummadiNorm Zhou

  2. Goals of the Lab • Learn to do wire-wrap • Wire an SRAM to the Xilinx on the design demonstration board, test and debug it • Learn another interesting application of LFSRs in generating and verifying test patterns • Build the FIFO as a component that is going to be used later in the project

  3. Wrapping End Unwrapping End Hole for Pin Wire Stripper Hole for Wire Slot for Wire Using Wire-wrap • You should have picked up a kit containing this tool from the TAs

  4. Making a Wire-wrap Connection • Plan the route of your wire • Cut the wire ~ 2.5 inches longer than the route you choose • Strip an inch of insulation off each end • Insert a stripped end of the wire into the off-center hole in the end of the wrapping end of the tool • Put the wrapping end of the tool on the pin to be connected • Gently, without pushing down, or lifting up, twist the tool clockwise about 12 revolutions • DO AS MUCH OF THE WIRE-WRAP WORK AS POSSIBLE BEFORE COMING TO THE LAB

  5. SRAMs • Very fast, simple, more expensive than DRAM • We use W24512AK that: • Has 8 data pins • 16 address pins • Can put out data in 15ns • NOTE: the Xilinx pin assignment is different for this lab than the previous years’ labs

  6. Cycle 1 Cycle 2 Cycle 3 ADDR DATA WE Reading/writing From the SRAM • Reading is easy: • Just assert OE and read the data line • Writing, however, is a tricky: • Problem is, writes are asynchronous • Address and data line should stay stable, and not just on the clock edges

  7. Testing SRAM • How do we know whether the SRAM is working correctly? • Write test vectors into SRAM memory, read them back, and test if they match • Two approaches to generating test vectors: • Use specific patterns • Use a brute-force approach • We use the latter, except that we are a bit clever in the data we stick into the SRAM: • We use LFSRs to generate the data • Good, because we do not need to store the original patterns, and we can randomly test for all patterns

  8. FIFOs • Abstractly, fifos are like queues: you can enqueue elements into them, and dequeue them later, but only in the order in which they were enqueued (hence, the name) • Can be implemented using two counters (head and tail), and a piece of SRAM • In this class, however, the SRAM block is external to the FIFO

  9. ADDR[14:0] FULL EMPTY HALF_FULL FIFO Read Write Better FIFOs • Along with the “head” and “tail” pointers, we also have more control signals out of the fifo • The fifo can use the control signals to indicate its state • This fifo is 32-K words deep

  10. Notes on FIFO Design • Since the SRAM is outside the FIFO, you need to route FIFO-generated addresses to SRAM address pins • Recall that a FIFO has two counters, a head and a tail • Which counter’s contents do we put out? • Answer: use a MUX or a tri-state buffer to determine whether a FIFO is being read or written

  11. FSM Read Write FULL EMPTY FIFO LFSR=DIN Reset_LFSR Enable_LFSR LFSR & Comparator OE WE CE ERROR IO BLOCK DOUT[7:0] DIN[7:0] ADDR[14:0] ADDR15 0 Putting It All Together • The LFSR generates data for testing • You must design the shaded parts • NOTE: the OE, WE, and CE, are all active high externally

More Related