1 / 26

Handrail Assembly and Steel Stairs

Handrail Assembly and Steel Stairs. Handrail Terminology. Guardrail top most rail on balcony higher than handrail. Vertical Rail members between balusters ensure safety. Handrail member that parallels angle of stairs ensure safety. Horizontal Rail lower rail parallel to handrail

kylee
Télécharger la présentation

Handrail Assembly and Steel Stairs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Handrail Assembly and Steel Stairs

  2. Handrail Terminology • Guardrail • top most rail on balcony • higher than handrail • Vertical Rail • members between balusters • ensure safety • Handrail • member that parallels angle of stairs • ensure safety • Horizontal Rail • lower rail parallel to handrail • ensure safety • Baluster • member that holds up handrail and vertical & horizontal railing

  3. Handrail Terminology • Newel (newel post) • Large terminating post at the bottom or top of stairs or landing • Half newel is next to the wall on the right

  4. Handrail Terminology • Gooseneck • transition from handrail to guardrail due to height difference

  5. Handrails • Definition: a member that parallels the angle of the stairs allowing a person to grasp by hand to aid using the stairs • Serves 2 purposes • aid in ascending/descending stair • safety • Height restriction set by code • usually 34 - 38” (measured from edge of nosing)

  6. Guardrail • Located at balconies, lookouts, and decks • Any platform more than 30” above grade • Top most rail of balcony railing • Provides safety • Height restrictions set by code • Not less than 42”(measured from floor )

  7. Guardrail Forces • Horizontal thrust normally 20 lbs/linear foot @ top of guardrail: • baluster 5 feet apart • 5 (x) 20 = 100 lbs • Baluster attachment @ floor: • 100 lbs (x) 3’ height = 300 lbs • Holding power of bolts - quantity and size determined by architect/engineer

  8. Vertical Rail • Spacing restricted set by code • present code 4” maximum gap between vertical member, (9” in book is old code) • applies to all open railings if stairs are 30” or more off floor

  9. Steel Stairs

  10. Steel Stair Details • Reasons for steel stairs • building code requirements for specific buildings • commercial buildings (occupancy count considered) • exterior design of steel weather better than wood • fire protection • structural strength and stability • aesthetics and design compatibility • steel gives more flexibility in design • design rules are same as for other stair designs

  11. Materials in Steel Stairs • Steel stringers • Handrails • Treads • Metal clips and attachment • Welding plates

  12. 10” Steel Stringers • Usually selected from steel channels • old callout 10[ 15.3 or 10C15.3 • new callout C10 x 15.3 • New callout explanation • 10 = nominal height of channel • C = type of steel section, in this case an American Standard channel • 15.3 = weight per foot of steel section

  13. Steel Stringer Designs • A. Compound cut (two cuts) & plates welded to enclose channel • B. Completed design of A • C. Single cut of channel • D. Another channel cut as leg of stringer • E. & F. Completed design of leg & stringer welded together

  14. Example of Steel Channels Stringerswith Pre-fabricated Stair Units

  15. Steel Handrail, Guardrails, & Treads • A thru D--Handrail/guardrails designs • E & F--Baluster attachment designs • G & H--Tread designs

  16. Treads Materials and Construction Methods • Pre-cast/reinforced concrete • Reinforced concrete/metal pan

  17. Treads Materials and Construction Methods • Concrete poured in place • Steel

  18. Section of a Concrete “U” Shape Stairs

  19. Metal Clips/Brackets • Metal angles • steel angles welded to inter side of stringer • Metal brackets • triangle or other shapes welded to top of stringer Metal angle Metal bracket

  20. Metal Tread Bracket • Metal bracket welded to stringer to accommodate treads

  21. Welding Plates • Used to enclose end of stringer (channel) • aesthetic • attachment of stringer to structure • Embedded in underneath side of pre-cast treads • purpose of attaching tread to structure by welding Welding plates

  22. Handrail Assembly Details • Elevation/Section to include • material/size • handrail • vertical rails • bottom rails • height of handrail • spacing of vertical rails • detail callouts

  23. Drawing Example Section/ Elevation @ 1” =1’-0” • Section/Elevation view of stairs • Changes: • Reverse direction of section 7-7 • vertical rails @4”OC more

  24. Drawing ExampleHandrail Assembly Detail @ 6” =1’-0” • Section of wood handrail • callout of catalog to match cross-section or sufficient dimensions to mill • connection method as shown • profile wood handrail more

  25. Drawing Example BalusterDetail Section 6” =1’-0” • Baluster • weld symbol should be weld all around • size of screws: 2-1/4” X 1 1/2” flathead screw • locate center of screws 5/16” from edge,

  26. That's All Folks

More Related