1 / 57

2013 NATEF Task Area A-2 Automatic Transmission 7-2013

2013 NATEF Task Area A-2 Automatic Transmission 7-2013. A. General Transmission & Transaxle Diagnosis B. Transmission & Transaxle Maintenance & Adjustment C. In-Vehicle Transmission & Transaxle Repair D. Off-Vehicle Transmission & Transaxle Repair. Typical Rubric for NATEF Competencies

kyra-holland
Télécharger la présentation

2013 NATEF Task Area A-2 Automatic Transmission 7-2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2013 NATEF Task Area A-2 Automatic Transmission7-2013 • A. General Transmission & Transaxle Diagnosis • B. Transmission & Transaxle Maintenance & Adjustment • C. In-Vehicle Transmission & Transaxle Repair • D. Off-Vehicle Transmission & Transaxle Repair Typical Rubric for NATEF Competencies 1 = Demonstrated Exposure and has observed the competency 2 = Applies the competency but only mastered a few essential attributes 3 = Capable of the competency but needs further practice 4 = Performs the competency satisfactorily [Proficient] 5 = Mastered the competency [Exemplary]

  2. NATEF Task Area A-2 Automatic Transmission & Transaxle Identify and interpret transmission/transaxle concern, differentiate between engine performance and transmission/transaxle concerns; determine necessary action. A2.A.1 P-1

  3. NATEF Task Area A-2 Automatic Transmission & Transaxle Research applicable vehicle and service information fluid type, vehicle service history, service precautions, and technical service bulletins. A2.A.2 P-1

  4. NATEF Task Area A-2 Automatic Transmission & Transaxle Diagnose fluid loss and condition concerns; determine necessary action. A2.A.3 P-1

  5. NATEF Task Area A-2 Automatic Transmission & Transaxle Check fluid level in a transmission or a transaxle equipped with a dip-stick. A2.A.4 P-1

  6. NATEF Task Area A-2 Automatic Transmission & Transaxle Check fluid level in a transmission or a transaxle not equipped with a dip-stick. A2.A.5 P-1

  7. NATEF Task Area A-2 Automatic Transmission & Transaxle Perform pressure tests (including transmissions/transaxles equipped with electronic pressure control); determine necessary action. A2.A.6 P-1

  8. NATEF Task Area A-2 Automatic Transmission & Transaxle Diagnose noise and vibration concerns; determine necessary action. A2.A.7 P-2

  9. NATEF Task Area A-2 Automatic Transmission & Transaxle Perform stall test; determine necessary action. A2.A.8 P-3

  10. NATEF Task Area A-2 Automatic Transmission & Transaxle Perform lock-up converter system tests; determine necessary action. A2.A.9 P-3

  11. NATEF Task Area A-2 Automatic Transmission & Transaxle Diagnose transmission/transaxle gear reduction/multiplication concerns using driving, driven, and held member (power flow) principles. A2.A.10 P-1

  12. NATEF Task Area A-2 Automatic Transmission & Transaxle Diagnose electronic transmission/transaxle control systems using appropriate test equipment and service information. A2.A.11 P-1

  13. NATEF Task Area A-2 Automatic Transmission & Transaxle Diagnose pressure concerns in a transmission using hydraulic principles (Pascal’s Law). A2.A.12 P-2

  14. NATEF Task Area A-2 Automatic Transmission & Transaxle Inspect, adjust, and replace external manual valve shift linkage, transmission range sensor/switch, and park/neutral position switch. A2.B.1 P-2

  15. NATEF Task Area A-2 Automatic Transmission & Transaxle Inspect for leakage; replace external seals, gaskets, and bushings. A2.B.2 P-2

  16. NATEF Task Area A-2 Automatic Transmission & Transaxle Inspect, test, adjust, repair, or replace electrical/electronic components and circuits including computers, solenoids, sensors, relays, terminals, connectors, switches, and harnesses. A2.B.3 P-1

  17. NATEF Task Area A-2 Automatic Transmission & Transaxle Drain and replace fluid and filter(s). A2.B.4 P-1

  18. NATEF Task Area A-2 Automatic Transmission & Transaxle Inspect powertrain mounts. A2.B.5 P-2

  19. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.1 Remove and reinstall transmission/transaxle and torque converter; inspect engine core plugs, rear crankshaft seal, dowel pins, dowel pin holes, and mating surfaces. P-1

  20. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Remove and reinstall transaxle and torque converter assembly.

  21. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.2 Inspect, leak test, and flush or replace transmission/transaxle oil cooler, lines, and fittings. P-1

  22. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.3 Inspect converter flex (drive) plate, converter attaching bolts, converter pilot, converter pump drive surfaces, converter end play, and crankshaft pilot bore. P-2

  23. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.4 Describe the operational characteristics of a continuously variable transmission (CVT). P-3

  24. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.5 Describe the operational characteristics of a hybrid vehicle drive train. P-3

  25. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.6 Disassemble, clean, and inspect transmission & transaxle. P-3

  26. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.7 Inspect, measure, clean, and replace valve body (includes surfaces and bores, springs, valves, sleeves, retainers, brackets, check-balls, screens, spacers, and gaskets), and torque valve body bolts. P-3

  27. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.8 Inspect servo bore, piston, seals, pin, spring, and retainers; determine necessary action. P-3

  28. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.9 Assemble transmission/transaxle. P-3

  29. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.9 Assemble transmission/transaxle. P-3

  30. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.10 Inspect, measure, and reseal oil pump (F & R) assembly and components. P-3

  31. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.11 Measure endplay or preload; determine necessary action. P-1

  32. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.12 Inspect, measure, and replace thrust washers and bearings. P-3

  33. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.13 Inspect oil delivery circuits, including seal rings, ring grooves, and sealing surface areas, feed pipes, orifices, and check valves/balls. P-3

  34. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.14 Inspect bushings; determine necessary action. P-3

  35. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Inspect extension housing, bushings and seals; perform necessary action.

  36. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.15 Inspect and measure planetary gear assembly (includes sun, ring gear, thrust washers, planetary gears. and carrier assembly); determine necessary action. P-3

  37. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.16 Inspect case bores, passages, bushings, vents, and mating surfaces; determine necessary action. P-3

  38. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Inspect, measure, and replace thrust washers and bearings.

  39. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.17 Diagnose and inspect transaxle drive, link chains, sprockets, gears, bearings, and bushings; perform necessary action. P-3

  40. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.18 Inspect, measure, repair, adjust or replace transaxle final drive components. P-3

  41. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.19 Inspect clutch drum, piston, check-balls, springs, retainers, seals, friction and pressure plates; determine necessary action. P-3

  42. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.20 Measure clutch pack clearance; determine necessary action. P-1

  43. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.21 Air test operation of clutch and servo assemblies. P-1

  44. NATEF Task Area A-2 Automatic Transmission & Transaxle A2.C.22 Inspect roller and sprag clutch, races, rollers, sprags, springs, cages, and retainers; determine necessary action. P-3

  45. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Diagnose transmission/transaxle gear reduction/multiplication concerns using driving, driven, and held member (power flow) principles. Carrier drives = overdrive Carrier driven = reduction Carrier held = reverse Two members held = direct drive Nothing driven or held = neutral Parking Pawl engaged to the output shaft = park

  46. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Diagnose electrical/electronic concerns using principles of electricity (Ohms' Law).

  47. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Inspect and reinstall parking pawl, shaft, spring, and retainer; determine necessary action.

  48. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Inspect bands and drums; determine necessary action.

  49. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Inspect accumulator bore, piston, seals, spring, and retainer; determine necessary action.

  50. NATEF Task Area A-2 Automatic Transmission & Transaxle “Oldie” Diagnose mechanical and vacuum control system concerns; determine action.

More Related