1 / 44

Chapter 16 Solubility and Complex Ion Equilibria

Chapter 16 Solubility and Complex Ion Equilibria. 16.1 – Solubility E quilibria and the Solubility P roduct. Solubility Product (Constant), K sp : Take MgF 2 for example, MgF 2(s) ⇌ Mg 2+ ( aq ) + 2F - ( aq ) , K sp = 5.16 x 10 -11

lark
Télécharger la présentation

Chapter 16 Solubility and Complex Ion Equilibria

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 16Solubility and Complex Ion Equilibria

  2. 16.1 – Solubility Equilibria and the Solubility Product • Solubility Product (Constant), Ksp: Take MgF2 for example, MgF2(s)⇌ Mg2+(aq) + 2F-(aq), Ksp = 5.16 x 10-11 Where Ksp = 5.16 x 10-11 = [Mg2+] x [F-]2

  3. 16.1 – Solubility Equilibria and the Solubility Product • Solubility Product (Constant), Ksp: This K behaves just like any other K. It is influenced by temperature, according to Le Chatelier’s principle. Most dissolution reactions are endothermic, meaning increasing temperature also increases the [M+] and [X-].

  4. 16.1 – Solubility Equilibria and the Solubility Product • Example, what is the concentration of acetate ions when 5g of silver acetate (MW 167g/mol) are dissolved in 150ml of water? Ksp of AgCH3COO is 1.94 x 10-3.

  5. 16.1 – Solubility Equilibria and the Solubility Product • We can also express solubility in terms of moles per litre. Solubility measured in these dimensions can be converted to a Ksp value. • How do you define solubility? • For Ag2S, solubility is 3.4 x 10-17 M We can say that there are 3.4 x 10-17 moles of S2- in 1 litre of solution containing Ag2S. There are 6.8 x 10-17 moles of Ag+ because [Ag+] = 2[S2-] upon dissociation

  6. 16.1 – Solubility Equilibria and the Solubility Product • Example, what is the Ksp for Ag2S? The solubility of silver sulfide is 3.4 x 10-17mol/L

  7. 16.1 – Solubility Equilibria and the Solubility Product • Example, Lead (II) bromide has a Ksp of 4.6 x 10-6. What is its solubility in moles per litre?

  8. 16.1 – Solubility Equilibria and the Solubility Product • Example, Approximately 0.14g of nickel (II) hydroxide dissolve per litre of water at 20oC. Calculate Ksp for Ni(OH)2 at this temperature. MW of Ni (OH)2 = 92.71g/mol

  9. 16.1 – Solubility Equilibria and the Solubility Product • Example, What is the solubility of Ba3(PO4)2 in g/L? Ksp = 6.0 x 10-39, MW = 601.8g/mol

  10. 16.1 – Solubility Equilibria and the Solubility Product • Comparing solubilities • When the salts you’re comparing have the same number of ions (i.e., NaCl, MgSO4, KClO4, etc…) the one with the highest Ksp is most soluble • When the salts you’re comparing have a different number of ions (i.e., MgCl2, ZnF, Ca3(PO4)2, etc…), you must convert each Ksp to molar solubility, then compare solubilities

  11. 16.1 – Solubility Equilibria and the Solubility Product • Comparing solubilities • Example, which has a higher solubility? Zn(OH)2, Ksp = 4.5 x 10-17 BaCO3, Ksp= 1.6 x 10-9 Ag3PO4Ksp= 1.8 x 10-18

  12. 16.1 – Solubility Equilibria and the Solubility Product • Common Ion Effect • We saw this before – adding a common ion to the solution shifts the equilibrium to the reactants. In other words, adding a common ion reduces solubility. • Now, we will look at the quantitative aspect of this:

  13. 16.1 – Solubility Equilibria and the Solubility Product • Example, • Calculate the solubility of SrF2 (Ksp = 7.9 x 10-10) in: • A. Pure water • B. 0.10M Sr(NO3)3 • C. 0.40M NaF

  14. 16.1 – Solubility Equilibria and the Solubility Product • pH and solubility: • If you add an acid/base to a solution, and the H+/OH- can react with the ions in the solution, (taking them out of solution), then solubility increases because Le Chatelier says the equilibrium shifts to the products (i.e., more ions!) • Don’t worry about these calculations

  15. 16.1 – Solubility Equilibria and the Solubility Product • pH and solubility: • Calculations you should worry about are calculating solubility in different pH’s

  16. 16.1 – Solubility Equilibria and the Solubility Product • Example, • Calculate the solubility of Fe(OH)3,Ksp = 4 x 10-38 in the following solutions: • A. Water • B. A solution buffered at pH 5 • C. A solution buffered at pH 11

  17. 16.2 – Precipitation and Qualitative Analysis • We will be doing quantitative work with qualitative analysis now. • This section asks: “If I mix these two solutions, will a precipitate form? If so, what will be the concentration of remaining ion in solution?”

  18. 16.2 – Precipitation and Qualitative Analysis • To do this, we will look at a value similar to Ksp. We will call it the ion product, and denote it with Qsp. • It is calculated the same way as Ksp, but instead of using equilibrium concentrations, Qsp uses initial concentrations.

  19. 16.2 – Precipitation and Qualitative Analysis • Recall:

  20. 16.2 – Precipitation and Qualitative Analysis • When dealing with possible precipitation equilibria, if Qsp > Ksp, then a precipitate will form because the equilibrium shifts towards reactants (i.e., the solid)

  21. 16.2 – Precipitation and Qualitative Analysis • Example, • A 200ml solution of 1.3 x 10-3 M AgNO3 is mixed with 100ml of 4.5 x 10-5 M Na2S solution. Will a precipitation reaction occur?

  22. 16.2 – Precipitation and Qualitative Analysis • Example, • First, find out what your potential ppt is Ag+NO3- S2-Na+ Ag2S appears to be the only ppt that can form Check your table to find Kspof Ag2S is 1.6 x 10-49

  23. 16.2 – Precipitation and Qualitative Analysis • Example, • Next, find the initial concentrations of Ag+ and S2- (upon mixing) [Ag+]i = (0.2L) (0.0013M) = 8.67 x 10-4 M (0.3L) [S2-]i = (0.1L) (0.000045M) = 1.5 x 10-5 M (0.3L)

  24. 16.2 – Precipitation and Qualitative Analysis • Example, • Next, plug these values into the equation for Qsp Ag2S(s)⇌ 2Ag+ + S2- Ksp = [Ag+]2 [S2-] = 1.6 x 10-49 Qsp = (8.67 x 10-4)2 (1.5 x 10-5) = 1.1 x 10-11 Qsp > Ksp, so an Ag2S precipitate will form

  25. 16.2 – Precipitation and Qualitative Analysis • Example, • In the previous question, what will be [Na+], [NO3-], [Ag+], and [S2-] at equilibrium? • [Na+] and [NO3-] are easy, since the original salts Na2S and AgNO3 are 100% soluble: [Na+] = 4.5 x 10-5M and [NO3-] = 1.3 x 10-3M

  26. 16.2 – Precipitation and Qualitative Analysis • Example, • Flip the equation around (inverting Ksp) Ag2S(s)⇌ 2Ag+ + S2-Ksp = 1.6 x 10-49 2Ag+ + S2- ⇌ Ag2S(s) K = 6.25 x 1048

  27. 16.2 – Precipitation and Qualitative Analysis • Example, • Then do a RICE diagram (in moles): 2Ag+ + S2- ⇌ Ag2S(s) K = 6.25 x 1048 0.00026 0.000045 --- -0.000090 -0.000045 --- 0.00017 0 --- 0.00017 moles Ag+, [Ag+] = 0.00017/0.3L = 5.67 x 10-4M

  28. 16.2 – Precipitation and Qualitative Analysis • Example, • At equilibrium, [S2-] is not actually zero because the reaction does not go to completion. A small amount of Ag2S re-dissolves to reach equilibrium. • Now we must ask ourselves: what is the solubility of solid Ag2S in a 5.67 x 10-4M Ag+ solution?

  29. 16.2 – Precipitation and Qualitative Analysis • Example, • To answer this, go back to our solubility product: R Ag2S(s)⇌ 2Ag+ + S2- I 5.67 x 10-4 0 C +2s +s E 5.67 x 10-4 s Ksp = (5.67 x 10-4)2(s) = 1.6 x 10-49… s = [S2-] = 4.98x10-43M

  30. 16.2 – Precipitation and Qualitative Analysis

  31. 16.2 – Precipitation and Qualitative Analysis

  32. 16.3 – Equilibria Involving Complex Ions • A complex ion is a charged species consisting of a metal ion (Lewis Acid) surrounded by multiple ligands (Lewis Base). • Common metal ions: • Ag+, Fe2+/3+, Cu+/2+, Al3+ • Common ligands: • H2O, NH3, CN-, Cl-

  33. 16.3 – Equilibria Involving Complex Ions • The number of ligands attached to the metal ion is called the coordination number. The coordination number is usually 2, 4, or 6, but others are known. • Ligands add one at a time, with each addition having its own equilibrium constant (K1, K2, etc…) or formation/stability constant

  34. 16.3 – Equilibria Involving Complex Ions • For example, in the formation of Cu(NH3)42+, Cu2+ + NH3 ⇌ Cu(NH3)2+ K1 = 1 x 105 Cu(NH3)2++ NH3 ⇌ Cu(NH3)22+K2 = 2 x 105 Cu(NH3)22++ NH3 ⇌ Cu(NH3)32+K3 = 3 x 105 Cu(NH3)32++ NH3 ⇌ Cu(NH3)42+K4 = 4 x 105

  35. 16.3 – Equilibria Involving Complex Ions • For example, • If you were to combine 100ml of 0.001M Cu(NO3)2 with 100ml of 1M NH3 • We know that NH3 will react as a base towards water, but because the equilibrium lies so far to the left (Kb << 1), we can ignore the contribution of the acid-base reaction

  36. 16.3 – Equilibria Involving Complex Ions • For example, • On the other hand, the K’s for the formation of the complex ion are very large, they essentially go to completion • As soon as the two are mixed, but before any reaction occurs, we know the initial concentrations are: [Cu2+]0 = ((0.1L)(0.001M)/(0.2L)) = 0.0005M [NH3]0 = ((0.1L)(1M)/(0.2)) = 0.5M

  37. 16.3 – Equilibria Involving Complex Ions • For example, • The RICE diagram would look something like this: R Cu2+ + 4NH3 Cu(NH3)42+ I 0.0005M 0.5M 0 C -0.0005M -4(0.0005M) +0.0005M E 0 ~0.5M 0.0005M

  38. 16.3 – Equilibria Involving Complex Ions • For example, • Although they will be small, we can calculate [Cu(NH3)2+], [Cu(NH3)22+] and [Cu(NH3)32+] by backtracking to the four formation equations. For example, Cu(NH3)32+ + NH3 ⇌ Cu(NH3)42+ K4 = 4 x 105

  39. 16.3 – Equilibria Involving Complex Ions • For example, Cu(NH3)32+ + NH3 ⇌ Cu(NH3)42+ K4= 4 x 105 K4 = 4 x 105 = [Cu(NH3)42+] [Cu(NH3)32+] [NH3] [Cu(NH3)32+] = (0.0005M)/(4 x 105) = 1.25 x 10-9M

  40. 16.3 – Equilibria Involving Complex Ions • For example, Repeat this procedure with K3, K2, and K1 to get: [Cu(NH3)22+] = 4.2 x 10-15 [Cu(NH3)2+] = 2.1 x 10 [Cu2+] = 1.1 x 10

  41. 16.3 – Equilibria Involving Complex Ions • The solubility of complex ions is important in qualitative analysis. For example, adding HCl to a solution containing Ag+, Pb2+, and Hg22+ will form the precipitates AgCl, PbCl2, and Hg2Cl2. • Now how can we separate them from each other and identify the individual cations?

  42. 16.3 – Equilibria Involving Complex Ions • Sometimes, lowering the pH will cause some precipitates to dissolve. It will not work here because the Cl- is such a weak base, it will have no affinity for H+. AgCl(s)⇌ Ag+(aq) + Cl-(aq) PbCl2(s)⇌Pb+(aq) + 2Cl-(aq) Hg2Cl2(s)⇌ Hg22+(aq) + 2Cl-(aq)

  43. 16.3 – Equilibria Involving Complex Ions • Le Chatelier gives us another choice: lower the amount of Ag+/Pb2+/Hg22+ AgCl(s)⇌ Ag+(aq) + Cl-(aq) PbCl2(s)⇌ Pb2+(aq) + 2Cl-(aq) Hg2Cl2(s)⇌ Hg22+(aq) + 2Cl-(aq)

  44. 16.3 – Equilibria Involving Complex Ions • To do this, we can add excess NH3, which will form a complex ion with Ag+, Ag(NH3)2+ • Adding ammonia will lower [Ag+], which will drive the reaction… AgCl(s)⇌ Ag+(aq) + Cl-(aq) • … forward, dissolving the AgCl(s)

More Related