1 / 11

CHEM 1031

CHEM 1031. DETERMINATION OF THE PERCENT ACETIC ACID IN A VINEGAR SAMPLE. PART I - DETERMINE THE CONCENTRATION OF HCl USING Na 2 CO 3 . PART II - NaOH USING HCl PART III - ACETIC ACID IN VINEGAR USING NaOH. PROCEDURE - PART1.

lefty
Télécharger la présentation

CHEM 1031

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHEM 1031 DETERMINATION OF THE PERCENT ACETIC ACID IN A VINEGAR SAMPLE

  2. PART I - DETERMINE THE CONCENTRATION OF HCl USING Na2CO3. • PART II - NaOH USING HCl • PART III - ACETIC ACID IN VINEGAR USING NaOH

  3. PROCEDURE - PART1 • OBTAIN VIAL OF Na2CO3, BURET, AND PAPER STRIP FROM STOCK ROOM. • IN A 500 ml FLAT BOTTOM BOILING FLASK, ADD 250 ml dH2O • IN A 10 ml CYLINDER, MEASURE 8.4 ml OF 6M HCl AND ADD TO FLASK.

  4. GET 3 250 ml ERLENMEYER FLASKS AND ADD ~.2-.25 g Na2CO3. • ADD ~30-50 ml dH2O TO EACH FLASK. • ADD THREE DROPS BROMOPHENOL BLUE INDICATOR

  5. CLEAN BURETS, THEN RINSE 3 TIMES WITH 5 ml SAMPLES OF HCl. • FILL BURET WITH HCl. • TITRATE SOLUTION. • SAVE HCl.

  6. PROCEDURE - PART 2 • STOCKROOM: BURET, 25 ml VOLUMETRIC PIPET. • IN A LARGE BROWN BOTTLE, ADD 8.2 ml OF 6M NaOH. DILUTE TO 500 ml. (STOP UP NaOH)

  7. CLEAN PIPET WITH 5 ml dH2O. RINSE 3 TIMES WITH 5 ml SAMPLES OF HCl. • PIPET 25 ml HCl INTO 3 ERLENMEYER FLASKS. • ADD 50 ml dH2O TO EACH.

  8. ADD 3 DROPS OF PHENOLPHTHALEIN INDICATOR. • RINSE BURET WITH 5 ml SAMPLES OF NaOH. • FILL BURET WITH NaOH AND TITRATE SAMPLES.

  9. PROCEDURE - PART 3 • OBTAIN 50 ml OF VINEGAR SAMPLE IN A 250 ml BEAKER. • CLEAN A 10 ml PIPET WITH 1 ml dH2O, THEN 3 TIMES WITH 1 ml VINEGAR SAMPLE.

  10. ADD 5 ml OF VINEGAR SAMPLE INTO 3 ERLENMEYER FLASKS. • ADD 40 ml dH2O AND 3 DROPS OF PHENOLPHTHALEIN INDICATOR TO EACH FLASK. • TITRATE SAMPLES.

  11. REACTIONS PART I • 2HCl + Na2CO3  2NaCl + CO2 + H2O PART II • NaOH + HCl  H2O + NaCl PART III • CH3COOH + NaOH  CH3COONa + H2O

More Related