1 / 17

THE PRINT- SCAN Machine 3-D Spatial Mapping Device

THE PRINT- SCAN Machine 3-D Spatial Mapping Device. Nia Cook Stephen Tan Anil Rohatgi Senior Design Final Report Presentation ECE4006 Spring2005. Introduction. Project Goal

leo-valdez
Télécharger la présentation

THE PRINT- SCAN Machine 3-D Spatial Mapping Device

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. THE PRINT-SCAN Machine3-DSpatial Mapping Device Nia Cook Stephen Tan Anil Rohatgi Senior Design Final Report Presentation ECE4006 Spring2005

  2. Introduction • Project Goal Use of 3-D imaging techniques to measure the detailed physical structure of the interior of a confined space and map it into a virtual 3-D environment • Prototype The PRINT-SCAN Machine

  3. Project Specifications • 10cm*10cm*10cm cubic volume • Ability to capture physical detail (preferably at the micron level) • Ability to measure the size and shape of objects • Ability to measure relative positions of multiple objects within the volume • Cannot employ imaging techniques using x-rays

  4. Project Constraints • Objects are stationary within volume • Objects have low reflectivity • Objects are not in contact with neighbor • A four month time limit • Design cannot exceed $500 budget

  5. Component List • Sharp GP2D12 distance measuring sensor • IR Mirrors • HP Inkjet Printers • HP 5-49A Ink Cartridges • HP 5-29A Ink Cartridges • D1984 Data Capture with WINDAQ software • Constructed ten centimeter volume • Driver Circuit (L298N and SN74LS04N)

  6. Theoretical Design

  7. Project Technical Details • Box construction • 10 cm cube with open top • Tracks on inside to stabilize mirrors • Flaps on box for data threshold segmentation • Driver Circuit • SN74LS04N inverter toggles the L298N H-bridge so that printer moves back and forth • Function generator provides 100 mHz square wave as input • Power supply inputs 7 – 8 V for reasonable printer head speed

  8. Project Technical Details • Laser Sensors • Read distance as a function of voltage • Records voltages in Excel • 10 cm to 80 cm range • Mirrors • Reflective for 850 nm laser sensor • Angled at 45 degrees to reflect the laser beam to the object • Incremented upwards to capture object height

  9. Prototype Design

  10. Data Reconstruction • Sensor characterization • Power regression line: 8.0082x^(-0.837) • Correlation percent: 99.64% • Inverse regression applied to data

  11. Data Reconstruction • Data Imported from Microsoft Excel to Matlab for processing • Data needs to be segmented into vertical divisions

  12. Data Reconstruction • Matrix structure and corresponding coordinate values

  13. Data Reconstruction • Three reconstruction techniques Spline fit Point cloud Mesh Grid

  14. Data Reconstruction • Video demonstration result: • Attempted to scan two rubber wheels staggered inside the volume • Managed to reconstruct shape and location, however, recovering the spacing between the objects did not function. • Errors were in the data, not in the data processing

  15. Lessons Learned • Scheduling • IR Sensor Interaction • Power Drive • Calculations

  16. Conclusion • Although the device did not perform as well in real life as expected, there was adequate data to support proof of concept. • With better equipment, and more funding, the design could be extended to achieve the optimal goals of the project. Initial Specifications: Achieved Specifications:

  17. Questions? ??

More Related