1 / 3

ELEKTR NIKA

U pstream P ower B ack O ff (UPBO). The Problem is: Upstream bit rates on long loops are dramatically reduced.

leyna
Télécharger la présentation

ELEKTR NIKA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Upstream Power Back Off (UPBO) The Problem is: Upstream bit rates on long loops are dramatically reduced. Very high-speed digital subscriber line (VDSL) upstream data transmission in a distributed environment suffer from relatively strong far-end crosstalk generated by the shorter lines in the binder. very low Bit rate up normal very high The Solution is: UPBO. To secure the capacity on lines of all lengths, the transmit power of shorter lines should be reduced. This power reduction is known as upstream power back off or UPBO. normal Bit rate up normal normal ELQ 30 VDSL Copper Qualifier provides templates for the qualification of local cables when UPBO is applied. ELEKTR NIKA

  2. UPBO versus Loop Length The amount of UPBO changes with the location of customer modems. The reduction is maximal in short loops, and minimal in long loops. ~900 m ~600 m ~300 m The calculation of applicable UPBO is based on the ”Electrical Length” of loops. The definition of Electrical Length = Loss at 1 MHz ELQ 30 VDSL Copper Qualifier provides achievable upstream data rate calculations with and without UPBO ELEKTR NIKA

  3. THANK YOU FOR YOUR ATTENTION!

More Related