1 / 15

by Steve Saboundjian Research Implementation Engineer ADOT&PF Research & T2

Cost-Effectiveness of Hard Aggregate Sources. A Presentation to the Asphalt Pavement Summit Anchorage, 11-13-02. by Steve Saboundjian Research Implementation Engineer ADOT&PF Research & T2. Cost-Effectiveness of Hard Aggregate Sources.

lira
Télécharger la présentation

by Steve Saboundjian Research Implementation Engineer ADOT&PF Research & T2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cost-Effectiveness of Hard Aggregate Sources A Presentation to the Asphalt Pavement Summit Anchorage, 11-13-02 by Steve Saboundjian Research Implementation Engineer ADOT&PF Research & T2 Statewide Research and Technology Transfer

  2. Cost-Effectiveness of Hard Aggregate Sources • Initiated by SE Region: to minimize studded tire wear • Objectives: • - to evaluate the economic feasibility of transporting high- quality aggregate for use in HMA surfacing • - to develop a method of performing benefit/cost analysis • Draft final report being reviewed by the TAC Statewide Research and Technology Transfer

  3. Cost-Effectiveness of Hard Aggregate Sources • Task I - Data Collection & Literature Review • Pavement performance data (rut depth): • - ADOT 2001 PM Dbase; 30-35 projects/region • Materials data: • - HMA type (SMA, Spave, conv.HMA, PMAC) • - Aggregate hardness (LA abrasion, Nordic abrasion) • Asphalt grade • All info in an Access Dbase • Literature review: ODOT, ADOT Statewide Research and Technology Transfer

  4. Cost-Effectiveness of Hard Aggregate Sources • Task II - To use the data gathered in Task I to develop pavement performance trends • Achieved in 3 steps by determining: • 1- Winter wear vs summer wear: • 67% of the annual rutting occurs in winter • 2- Pavement performance life based on rut wear only: • plots of “rut depth vs cumulative vehicle passes” Statewide Research and Technology Transfer

  5. Cost-Effectiveness of Hard Aggregate Sources Anch. & Jun. winter wear rate ~ 3.8 times Frbks Statewide Research and Technology Transfer

  6. Cost-Effectiveness of Hard Aggregate Sources • Total Rut = 0.5” at 51M passes ~ 18 years Statewide Research and Technology Transfer

  7. Cost-Effectiveness of Hard Aggregate Sources • Total Rut = 0.5” at 36M passes ~ 10 years Statewide Research and Technology Transfer

  8. Cost-Effectiveness of Hard Aggregate Sources • Total Rut = 0.5” at 22M passes ~ 12 years Statewide Research and Technology Transfer

  9. Cost-Effectiveness of Hard Aggregate Sources • Total Rut = 0.5” at 80M passes ~ 46 years Statewide Research and Technology Transfer

  10. Cost-Effectiveness of Hard Aggregate Sources • On average, performance predictions for the 3 regions is: • Anchorage …. 12 years • Juneau ……... 12 years • Fairbanks …... 46 years ……. Explanations: • 1- Reduced % of vehicles using studded tires • 2- Maintenance practices • 3- Hardness of the river bed aggregates • 4- Many of the Frbks sections were old pavements: “something in the older specf./construction procedures (from the 70’s & 80’s) worked well relative to more recent specfs. (90’s).” Statewide Research and Technology Transfer

  11. Cost-Effectiveness of Hard Aggregate Sources • Task II achieved in 3 steps by determining: • 3- Cost of HMA materials in the 3 regions: • Anchorage: Type II: $31/ton; SMA: $51-62/ton • Juneau: Type II: $52/ton • Fairbanks: Type II: $42/ton • Using Fairbanks as the standard, comparative potential costs for Anchorage and Juneau mixes were computed (spreadsheet + appendix) • Anchorage (SMA Aggr.) and Juneau (Type II Aggr.) could justify the expense of 1.5 -1.8 times their current aggregate costs to increase pavement performance life. Statewide Research and Technology Transfer

  12. Cost-Effectiveness of Hard Aggregate Sources • Aggregate Importation: • To Anchorage: • - from Fairbanks: by truck (18-ton haul units) • - from BC and WA: by super-barges (60k ton) • To Juneau: • - from Fairbanks (by truck) to Valdez (by barge) • - from BC, WA, OR: by super-barges Statewide Research and Technology Transfer

  13. Cost-Effectiveness of Hard Aggregate Sources • Recommendations for action by ADOT&PF: • Implement harder aggregate requirements on roadways with > 1M ESALs • Use harder aggregate requirements for surface courses only • Increase the high temperature binder grade for roadways with > 1M ESALs • Develop a strong partnering program with the HMA and aggregate industries within the state for the implementation of the aggregate requirement changes Statewide Research and Technology Transfer

  14. Cost-Effectiveness of Hard Aggregate Sources • Recommendations for action by ADOT&PF (cont’d): • Provide information to HMA producers regarding the availability of harder aggregate sources in Vancouver, Canada, at reasonable costs by barge • ADOT&PF should evaluate some of the potential aggregate sources inside and outside of the state for properties, especially the Nordic Abrasion Value Statewide Research and Technology Transfer

  15. Cost-Effectiveness of Hard Aggregate Sources Statewide Research and Technology Transfer

More Related