1 / 16

Pressure Safety Valve Design

Pressure Safety Valve Design. Presented to ES-317 at UWO in 1999 Dick Hawrelak. ASME Code. Section VIII for Unfired Pressure Vessels requires a PSV to be designed for the worst case scenario (fire or other upset). PSV alone does not protect the pressure vessel.

lorant
Télécharger la présentation

Pressure Safety Valve Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pressure Safety Valve Design • Presented to ES-317 at UWO in 1999 • Dick Hawrelak

  2. ASME Code • Section VIII for Unfired Pressure Vessels requires a PSV to be designed for the worst case scenario (fire or other upset). • PSV alone does not protect the pressure vessel. • Flames may impinge on the vapor space causing vessel failure. • Flammable liquid pressure vessels still require water coverage.

  3. PSV Design Methods • NFPA 30 • API-521 • Natural Gas Association.

  4. Problems • Heat input uncertain. • Wetted area versus vessel area. • Protection factors for heat input reduction are variable. • Treatment of physical properties are different.

  5. PSV1 • Single component fluid. • Blocked in vessel. • Fire conditions. • Boiling liquid.

  6. DIERS • Prediction of two-phase flow for PSVs designed for single phase flow. • Most often the vessel is filled beyond the “swell” and “foam” heights. • See example in PSV Folder in Chemical Plant Design.

  7. PSV2f • Single component fluid. • Blocked in vessel. • Fire conditions. • PSV sized for two phase flow.

  8. PSV3 • Vessel with 100% vapor. • Blocked in vessel. • Fire conditions. • Vapor expansion.

  9. PRDV • Rupture disc sizing. • Sonic or sub-sonic flow. • Overpressure for any reason.

  10. PRDL • Rupture disc sizing for flashing liquid. • Homogenius Equilibrium Model. • Landis CRITFLO method.

  11. PSV4 • PSV sizing for liquid expansion. • No phase change.

  12. PSV5 • Sizing relief vents. • Runaway reactions.

  13. HP Trip • ICI method to lower vessel pressure before PSV blows. • Manual Pressure control station to by-pass PSV. • Would rather vent manually than allow PSV to blow.

  14. EXPLO • Explosion venting routine. • Scale-up from pilot plant data.

  15. PSV Header and Flare Stack Design • Flare header design - multiple PSVs blow in fire area 50’ x 50’. • Complex headers for dry HCs, wet HCs, dry liquid and wet liquid blowdowns. • Flare KO drums. • Three API-521 flare stack methods.

  16. Possible Exam Questions • What are the four main problems with the different PSV design methods? • In a fire situation, does the PSV alone protect the pressure vessel? • Why would a PSV designed for sigle phase flow under fire conditions relieve a two phase vapor / liquid mixture?

More Related