1 / 70

Q PLC 簡介 伺服控制系統 全弘科技有限公司

Q PLC 簡介 伺服控制系統 全弘科技有限公司 張朝棋. Q PLC 基本架構. Q CPU 比較表. CPU 模組 LED 燈號. CPU 模組開關設定. 三菱整體網路架構. 多重 CPU 架構. Q 系列整合系統. 二重化系統架構. Q CPU 各記憶區塊. 記憶卡規格. 輸出繼電器 Y.

lorant
Télécharger la présentation

Q PLC 簡介 伺服控制系統 全弘科技有限公司

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Q PLC 簡介 • 伺服控制系統 全弘科技有限公司 張朝棋

  2. Q PLC 基本架構

  3. Q CPU 比較表

  4. CPU 模組 LED 燈號

  5. CPU 模組開關設定

  6. 三菱整體網路架構

  7. 多重 CPU 架構

  8. Q 系列整合系統

  9. 二重化系統架構

  10. Q CPU 各記憶區塊

  11. 記憶卡規格

  12. 輸出繼電器 Y

  13. 內部輔助繼電器 M

  14. 特殊暫存器 SD

  15. 編輯軟體簡介

  16. MELSERVO-J2S

  17. Servo Setup

  18. MR-J2S-□A

  19. Motor Model Configurator

  20. Motor Specification

  21. Motor Torque Curve

  22. MR-J2S-□A Driver Model

  23. MR-J2S-□A Driver Specifiction

  24. MR-J2S-□A Position Control Wiring

  25. MR-J2S-□A Speed Control Wiring

  26. MR-J2S-□A Torque Control Wiring

  27. MR-J2S-□A Position Control Wiring(1)

  28. MR-J2S-□A Encode Wiring(2)

  29. MR-J2S-□A CN3/CN4 Wiring

  30. MR-J2S-□B

  31. MR-J2S-□B Driver Specification

  32. MR-J2S-□B Wiring

  33. MR-J2S-□B CN3/CN4 Wiring

  34. MR-J2S-□CP

  35. MR-J2S-□CP Driver Specifiction

  36. MR-J2S-□CP Command

  37. MR-J2S-□CP-S084

  38. MR-J2S-□CP Wiring

  39. Features of QD75(1) • (1) Availability of one, two, and four axis modules • (2) Wide variety of positioning control functions • (3) Quick startup • (4) SSCNET makes the connection to the servo amplifier possible • (5) Easy application to the absolute position system • (6) Control can be realized with the mechanical system input

  40. Features of QD75(2) • (7) Easy maintenance • (8) Support of intelligent function module dedicated instructions • (9) Setups, monitoring, and testing through GX Configurator-QP

  41. Purpose and applications of positioning control(1)

  42. Purpose and applications of positioning control(2)

  43. Purpose and applications of positioning control(3)

  44. Positioning system using QD75

  45. Communicating signals between QD75 and each module

  46. List of input/output signals with PLC CPU

  47. Signal layout for external device connection connector

  48. Interface internal circuit

  49. The LED display indicates the following operation statuses of the QD75 and axes.

  50. Parameters and data required for control(1)

More Related