1 / 13

JR3PCI

JR3PCI. Installation Example. by J. Norberto Pires. Board: JR3PCI with 4 channels Vendor ID: Hex 1762 Device ID: Hex 3114. Operating System : Windows 2000 with Service Pack 3 (current example). Other operating systems tested : Windows 95/98/Me/XP/NT4.

lorna
Télécharger la présentation

JR3PCI

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. JR3PCI Installation Example by J. Norberto Pires

  2. Board: JR3PCI with 4 channels Vendor ID: Hex 1762 Device ID: Hex 3114 Operating System: Windows 2000 with Service Pack 3 (current example) Other operating systems tested: Windows 95/98/Me/XP/NT4

  3. 1. Power Down the computer and insert the board into a PCI slot. Power up the computer. 2. Windows should detect the board and ask you to install it. Wait. You need to install a driver first. 3. Download the necessary files from http://robotics.dem.uc.pt/norberto/jr3pci/ 4. Unzip the files to one of your hard disks. 5. Open a command window and type like bellow:

  4. 6. After this step your computer management window should look like:

  5. 7. The Plug & Play software must be addressed now. You should have windows like this in your desktop:

  6. 8. Say Next. Next window should appear.

  7. 9. Select Search for a suitable driver, and click Next. Next window should appear.

  8. 10. Specify a location, and click Next. Next window should appear.

  9. 11. Browse to where the software is located, and click OK. Next window should appear.

  10. 12. Windows installs software and you get the window.

  11. 13. After this your computer management should look like:

  12. 14. Please run the JR3PCI application to check installation and register driver.

  13. JR3PCI All Done … Thanks for using my tools. J. Norberto Pires

More Related