Is your garage door opening and closing the right way?

1. Is your garage door opening and closing the right way? Garage doors come in different types depending on the shape and size of your garage and where your garage door is placed. There are many types of garage doors, from sectional overhead doors, tilt-up, retractable and more. Whatever the type, would it not be interesting to know what makes these doors open and close? The mechanics behind the opening and closing of a garage door is crucial because it can cause damage to your door if not working properly. Over time, your garage door will age with the following signs: ●The door operates with a lot of noise ●Bent door sections ●The door pops or jumps during operation ●The garage door is off the tracks Let’s say these issues are happening slowly over a period. One of the main problems could be the springs of the garage door. Now, if you’re looking for a garage door installation or replacement, you’ll come across a term including torsion spring installation. What is a torsion spring and how to install it? As a leading US garage door company, we’ll help you understand the role of a torsion spring. A garage door spring is designed to counteract the force of gravity on the door. Therefore, a garage door spring is supposed to make your door light enough to be lifted off the ground smoothly. For this, a torsion spring is required. Some doors have another type of spring called the extension spring. While a torsion spring is mounted directly above the garage door, the extension springs are mounted beside the garage door horizontal tracks. In rare cases, it is mounted vertically on the sides. In this blog, let’s stick to one kind of spring – the torsion spring. When installed correctly, the torsion spring will efficiently balance the garage door to enable the opening and closing. Properly balanced springs will pull on each side of the overhead door using drums placed on either side of the torsion bar.

2. What do you do when the torsion spring is damaged? Let’s first talk about identifying the damage of a torsion spring. The extent of use and age of the torsion spring plays a considerable role in determining its functionality. The average spring life is 5 to 12 years, including up to 12,000 cycles with four cycles per day the average. At the same time, extension springs can last considerably longer. If a torsion spring has broken within the first year of purchase, its quality is probably an issue. Therefore, buying from a reputable company makes all the difference. To sustain the proper functioning of galvanized torsion springs, you might need to re- balance them within the first two years of installation. If you’ve had a garage door installed with oil-tempered springs, typically no re-balancing needs to be done. Typically springs aren't failing because they need re-balancing. Torsion springs fail because of lack of lubrication and how many times they have been used to open and close an overhead door. As a garage door company, we suggest putting your springs to the test. Check the position of the garage door when you release the opener (but always release the garage door when it is closed). The door should stay down when down and up when up. A little bit of movement is standard, but if the door is too heavy moving up or down the torsion springs may have failed. In this case, the spring should be inspected for damage. A second test involves pulling the door to the mid-level position. In this case, the door should rest in the mid-level position. If the door moves up or below this level, then the springs are damaged or improperly adjusted. By staying alert and aware of the springs of our garage, you can save it in time before further damage is done. Sources:https://garagedoorskansas.blogspot.com/2021/08/is-your-garage-door-opening- and-closing.html