1 / 21

The CDRH Software Message (October 19, 2002)

The CDRH Software Message (October 19, 2002). John F Murray Jr.. Center for Devices & Radiological Health US Food and Drug Administration JFM@CDRH.FDA.GOV. Mr. John F Murray Jr. Mr. Murray currently serves as the: Software and Part 11 Compliance Expert Office of Compliance

madonna-douglas
Télécharger la présentation

The CDRH Software Message (October 19, 2002)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The CDRH Software Message(October 19, 2002) John F Murray Jr.. Center for Devices & Radiological Health US Food and Drug Administration JFM@CDRH.FDA.GOV

  2. Mr. John F Murray Jr. • Mr. Murray currently serves as the: • Software and Part 11 Compliance Expert • Office of Compliance • Center for Devices and Radiological Health (CDRH) • US Food and Drug Administration.  

  3. Mr. John F Murray Jr. • In this position Mr. Murray is the primary advisor to the Director of the Office of Compliance in the areas of: • Software validation • Software policy • Software classification and • Part 11 compliance issues. • He is also responsible for: • the software standards program and • the software engineering training program at CDRH.

  4. Mr. John F Murray Jr. • Mr. John F Murray Jr. joined the FDA in March 1994. • Prior to becoming an FDA staffer, he was: • A qualified Reactor Operator with United States Navy Submarine Fleet • A Computer Field Engineer with Telex Computer Products • An Electronics and Software Engineer with The General Dynamics Corporation and a • Systems Engineer at Technology Management & Analysis

  5. Mr. John F Murray Jr. • Prior to joining the Office of Compliance in June 2001, Mr. Murray served as the Team Leader for Software and Intelligent Medical Devices with the United States Food and Drug Administration, Rockville, MD.  • Mr. Murray is the primary Advisor to the Chief of the Medical Electronics Branch in the areas of software engineering, software safety and software standards.

  6. Mr. John F Murray Jr. • The software team is responsible for: • Maintaining the technical foundations that are required for the regulation of medical device software. • Regulatory decisions regarding the safety and effectiveness of medical device software are based on engineering and scientific foundations. • Software Standards is one example of these engineering foundations.

  7. Mr. John F Murray Jr. • Mr. Murray is chairperson for the FDA Software Standards Technical Group (STG). • The Software STG is responsible for review and recognition of software engineering standards for use in the regulatory process.  • Mr. Murray also serves as Co-Chair of the AAMI Software Committee.

  8. Mr. John F Murray Jr. • Mr. Murray earned a: • BS Degree in Electrical Engineering from George Mason University • MS Degree in Computer Science from Rensselaer Polytechnic University (RPI).

  9. The CDRH Software Message John F Murray Jr.. Center for Devices & Radiological Health US Food and Drug Administration JFM@CDRH.FDA.GOV

  10. The Quality of Pubic Health is highly dependent on the Quality of Medical Software i.e. Medical Device Software, Clinical Information Systems, Hospital Information Systems, Manufacturing Systems etc Public Health and Software

  11. To get some perspective lets try what I call the YB scale. [yugo vs. bmw] I ask the following questions: Where would Microsoft be on this scale? Where do we want our software quality to be? Where do you want your software to be? What type of Quality do we Want?

  12. Yes they do: 21 CFR 820.30 21 CFR 820.30 (a) (2) (i) 21 CFR 820.30 (g) 21 CFR 820.70 (i) Do the regulations recognize this need

  13. Each manufacturer of any Class II or Class III device, and the Class I devices listed in paragraph (a)(2) of this section, shall establish and maintain procedures to control the design of the device in order to ensure that the specified design requirements are meet. 21 CFR 820.30 Design Controls

  14. Class I The following Class I devices are subject to design controls: Devices automated with computer software 21 CFR 820.30 (a)(2)(i)

  15. Design validation shall include software validation and risk analysis where appropriate 21 CFR 820.30 (g)

  16. Automated processes When computers or automated data processing systems are used as part of production or the quality system, the manufacturer shall validate computer software for its intended use according to an established protocol. All software changes shall be validated before approval and issuance. These validation activities shall be documented. 21 CFR 820.70 (i)

  17. Traditionally not engineered, but crafted Not physics based Easy to change or is it? Does not fail the hardware way. etc Software is Different

  18. What is the goal? • By Law: Medical Devices must be reasonably safe and effective • By default: Software must be safe and effective

  19. Safe and Effective • It depends! • Cannot be easily defined • What is safe and effective software • Software Engineering • Risk Management • Quality System

  20. Conclusion • The law and regulations are written in broad terms • Software should be engineered using: • Software Engineering • Risk Management • Quality System This is the CDRH Software Message

  21. Keys to Success • Avoid denial • Make a plan • Document your activities • Remember the three A’s of meeting the regulatory requirement • Activities • Attributes • Artifacts

More Related