1 / 9

About the GRD

About the GRD. Reiersen 03 April 2003. GRD is the top-level specification. GRD developed in Conceptual Design. Project spec formats patterned after standards in industry and government. Leverage off wealth of experience that went into developing specification practices

marcin
Télécharger la présentation

About the GRD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. About the GRD Reiersen 03 April 2003

  2. GRD is the top-level specification

  3. GRD developed in Conceptual Design

  4. Project spec formats patterned after standards in industry and government • Leverage off wealth of experience that went into developing specification practices • MIL-STD-490, MIL-STD-961, etc… • Specification types and formats are posted on the Engineering Web on the Specifications Page

  5. The 6-part format used throughout Subsection contents tailored to type of spec 1 Scope • Provide a clear, concise abstract of the coverage of the spec 2 Applicable documents • Lists all and only the documents referenced in Section 3, 4 and 5

  6. 3 Requirements Key subsections include the following… 3.2 Characteristics – Performance and physical characteristics defined here. 3.3 Design and construction – Requirements not controlled by performance characteristics or interface requirements defined here 3.7 Characteristics of subordinate elements – Requirements are allocated to lower level configuration items here. Enforces traceability. Provides basis for developing lower level specs.

  7. 4 Quality Assurance Provisions • The principle behind this section is verification - if a requirement is important enough to be specified in Section 3 or 5, then it is important enough to be verified that it is met. • For each requirement in Sections 3 and 5, the verification method (inspection, test, or analysis) is specified. • Provides basis for developing both analysis requirements and inspection and test plans.

  8. Remaining sections are straightforward 5 Preparations for Delivery 6 Notes and Appendices • Technical data should be documented in appendices and referenced in the text of the spec to facilitate updating if the technical data (which is more volatile than the text) is changed

  9. Summary • The GRD is the top-level spec and is the primary handshake between Physics and Engineering • Lower level specs will be developed from requirements that flow down from the GRD • Spec formats have been established based on industry/govt standards to promote consistency and completeness in developing specs • The Specifications page on the Engineering Web lists the specs and format requirements • Follow the guidelines and provide feedback so we can improve them

More Related